中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 36558-2018 电力系统电化学储能系统通用技术条件(中英文版) General technical requirements for electrochemical energy storage system in power system |
![]() |
|
![]() |
GB/T 42983.3-2023 工业机器人 运行维护 第3部分:健康评估(中英文版) Industrial robot operation and maintenance Part 3: Health assessment |
![]() |
|
![]() |
GB/T 4549.6-2004 铁道车辆词汇 第6部分:门、窗及其开闭装置(中英文版) Railway vehicle vocabulary--Part 6:Doors、windows and their operating devices |
![]() |
|
![]() |
GB 11779-2005 东海、黄海区拖网网囊 最小网目尺寸(中英文版) The minimum mesh size of the trawl cod-end in the East China Sea and Yellow Sea |
![]() |
|
![]() |
GB/T 34582-2017 固体氧化物燃料电池单电池和电池堆性能试验方法(中英文版) Single cell and stack performance test methods for solid oxide fuel cells (SOFC) |
![]() |
|
![]() |
GB/T 29056-2012 硅外延用三氯氢硅化学分析方法 硼、铝、磷、钒、铬、锰、铁、钴、镍、铜、钼、砷和锑量的测定 电感耦合等离子体质谱法(中英文版) Trichlorosilane for silicon epitaxy - Determination of boron,aluminium,phosphorus,vanadium,chrome,manganese,iron,cobalt,nickel,copper,molybdenum,arsenic and antimony content - Inductively coupled plasma mass spectrometric method |
![]() |
|
![]() |
GB/T 41002-2022 儿童箱包通用技术规范(中英文版) General specification for childrens case and bag |
![]() |
|
![]() |
GB/T 15821-1995 金属覆盖层 延展性测量方法(中英文版) Metallic coatings--Methods of measurement of ductility |
![]() |
|
![]() |
GB/T 17487-1998 四油口和五油口液压伺服阀 安装面(中英文版) Hydraulic fluid power--Four-and five-port servovalves--Mounting surfaces |
![]() |
|
![]() |
GB/T 14710-2009 医用电器环境要求及试验方法(中英文版) The environmental requirement and test methods for medical electrical equipment |
![]() |
|
![]() |
GB/T 35357-2017 船舶涂料中石棉含量测定方法(中英文版) Test method for asbestos content of marine paint |
![]() |
|
![]() |
GB/T 8152.15-2021 铅精矿化学分析方法 第15部分:可溶性铅含量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of lead concentrates—Part 15:Determination of soluble lead content—Flame atomic absorption spectrometry |
![]() |
|
![]() |
GB/T 1747.2-2008 色漆和清漆 颜料含量的测定 第2部分:灰化法(中英文版) Paints and varnishes - Determination of pigment content - Part 2:Ashing method |
![]() |
|
![]() |
GB/T 7594.4-1987 电线电缆橡皮绝缘和橡皮护套 第4部分:65℃一般橡皮护套(中英文版) Rubber insulationand sheath of electric cables and wires--Part 4:Ordinary duty rubber sheath 65℃ |
![]() |
|
![]() |
GB/T 22715-2016 旋转交流电机定子成型线圈耐冲击电压水平(中英文版) Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
![]() |
|
![]() |
GB 14887-2011 道路交通信号灯(中英文版) Road traffic signal lamps |
![]() |
|
![]() |
GB/T 38924.8-2020 民用轻小型无人机系统环境试验方法 第8部分:盐雾试验(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 8: Salt spray test |
![]() |
|
![]() |
GB 20286-2006 公共场所阻燃制品及组件燃烧性能要求和标识(中英文版) Requirements and mark on burning behavior of fire retarding products and subassemblies in public place |
![]() |
|
![]() |
GB/T 23361-2009 高纯氢氧化铟(中英文版) High purity indium hydroxide |
![]() |
|
![]() |
GB/T 38260-2019 服务机器人功能安全评估(中英文版) Service robot functional safety assessment |
![]() |
|
![]() |
GB/T 3098.15-2014 紧固件机械性能 不锈钢螺母(中英文版) Mechanical properties of fasteners―Stainless steel nuts |
![]() |
|
![]() |
GB 16215-1996 车间空气中邻苯二甲酸酐卫生标准(中英文版) Health standard for phthalic anhydride in the air of workplace |
![]() |
|
![]() |
GB/T 18029-2000 轮椅车 座(靠)垫阻燃性的要求和测试方法(中英文版) Wheelchairs--Resistance to ignition of upholstered parts--Requirements and test methods |
![]() |
|
![]() |
GB 25906.1-2010 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第1部分:正白体(中英文版) Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 1: Zhengbai Ti |
![]() |
|
![]() |
GB/T 36237-2018 风力发电机组 电气仿真模型(中英文版) Wind turbines—Electrical simulation models |
![]() |
|
![]() |
GB/T 2516-2023 普通螺纹 极限偏差(中英文版) Ordinary thread limit deviation |
![]() |
|
![]() |
GB/T 6115.1-2008 电力系统用串联电容器 第1部分:总则(中英文版) Series capacitors for power systems - Part 1: General |
![]() |
|
![]() |
GB/T 34725-2017 结构用人造板集中荷载和冲击荷载性能测试方法(中英文版) Standard test method for performance of structural wood-based panel under concentrated static and impact loads |
![]() |
|
![]() |
GB/T 29.1-2013 六角头带槽螺栓(中英文版) Hexagon bolts with slot on head |
![]() |
|
![]() |
GB/T 5170.20-2022 环境试验设备检验方法 第20部分:水试验设备(中英文版) Test methods for environmental test equipment - Part 20: Water test equipment |
![]() |
|
![]() |
GB/T 19851.17-2007 中小学体育器材和场地 第17部分:跳高架(中英文版) Sports equipment and playground for middle school & primary school - Part 17:Jumping standard |
![]() |
|
![]() |
GB/T 24810.5-2009 起重机 限制器和指示器 第5部分:桥式和门式起重机(中英文版) Cranes - Limiting and indicating devices - Part 5: Bridge and gantry cranes |
![]() |
|
![]() |
GB/T 5169.21-2017 电工电子产品着火危险试验 第21部分:非正常热 球压试验方法(中英文版) Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method |
![]() |
|
![]() |
GB/T 40389-2021 烧结金属材料(不包括硬质合金) 表面粗糙度的测定(中英文版) Sintered metal materials, excluding hardmetals—Measurement of surface roughness |
![]() |
|
![]() |
GB/T 7247.3-2016 激光产品的安全 第3部分:激光显示与表演指南(中英文版) Safety of laser products—Part 3:Guidance for laser display and shows |
![]() |
|
![]() |
GB/T 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm(中英文版) Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
![]() |
|
![]() |
GB/T 18453-2001 起重机 维护手册 第1部分:总则(中英文版) Cranes--Maintenance manual--Part 1:General |
![]() |
|
![]() |
GB 50753-2012 有色金属冶炼厂收尘设计规范(中英文版) Code for dust collection design of non-ferrous metals plant |
![]() |
|
![]() |
GB/T 40646-2021 基于公用电信网的宽带客户网络联网技术要求 可见光成像通信(中英文版) Technical requirements for broadband customer networking based on public telecommunication network -- Optical camera communications |
![]() |
|
![]() |
GB/T 22396-2008 压敏胶粘制品术语(中英文版) Terminology relating to pressure sensitive adhesive products |
![]() |
|
![]() |
GB/T 22838.15-2009 卷烟和滤棒物理性能的测定 第15部分:卷烟 通风的测定 定义和测量原理(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 15: Cigarettes - Determination of ventilation - Definitions and measurement principles |
![]() |
|
![]() |
GB/T 31855-2015 废硫化氢处理处置规范(中英文版) Treatment and disposal specification for waste hydrogen sulfide |
![]() |
|
![]() |
GB/T 39490-2020 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法(中英文版) Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method |
![]() |
|
![]() |
GB 30862-2014 坠落防护 挂点装置(中英文版) Personal fall protection equipment―Anchor devices |
![]() |
|
![]() |
GB 9662-1988 电离辐射事故干预水平及医学处理原则(中英文版) Guideline on intervention levels and medical management in the event of radiological accident |
![]() |
|
![]() |
GB/T 12928-2008 船用中低压活塞空气压缩机(中英文版) Marine reciprocating air compressor for medium pressure and low pressure |
![]() |
|
![]() |
GB/T 26430-2010 水果和蔬菜 形态学和结构学术语(中英文版) Fruits and vegetables - Morphological and structural terminology |
![]() |
|
![]() |
GB/T 36963-2018 光伏建筑一体化系统防雷技术规范(中英文版) Technical specifications for lightning protection of building integrated photovoltaic systems |
![]() |
|
![]() |
GB/T 43493.1-2023 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第1部分:缺陷分类(中英文版) Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 1: Defect classification |
![]() |
|
![]() |
GB/T 17213.6-2005 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装(中英文版) Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1070] [1071] [1072] [1073] [1074] [1075] [1076] |