中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 19974-2005 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌工艺的设定、确认和常规控制的通用要求(中英文版) Sterilization of health care products -- General requirement for characterization of a sterilizing agent and the development ,validation and routine control of a sterilization process for medical devices |
![]() |
|
![]() |
GB/T 16824.1-2016 六角凸缘自攻螺钉(中英文版) Hexagon washer head tapping screws |
![]() |
|
![]() |
GB/T 38948-2020 沥青混合料低温抗裂性能评价方法(中英文版) Evaluation method for the cracking resistance of asphalt mixture at low temperature |
![]() |
|
![]() |
GB/T 22894-2008 纸和纸板 加速老化 在80℃和65%相对湿度条件下的湿热处理(中英文版) Paper and board - Accelerated ageing - Moist heat treatment at 80℃ and 65% relative humidity |
![]() |
|
![]() |
GB/T 30261-2013 制冷空调用板式热交换器火用效率评价方法(中英文版) Evaluation methods for exergy efficiency of plate heat exchangers of refrigeration and air-conditioning systems |
![]() |
|
![]() |
GB/T 3367.1-2000 铁道机车名词术语 柴油机零部件名词(中英文版) Glossary of terms for railway locomotive--Names of component parts for diesel engine |
![]() |
|
![]() |
GB/T 2689.4-1981 寿命试验和加速寿命试验的最好线性无偏估计法(用于威布尔分布)(中英文版) Life test and acceleration life test--Optimal linear deflection-free--Evaluation of Weibull distributions |
![]() |
|
![]() |
GB 4793.4-2019 测量、控制和实验室用电气设备的安全要求 第4部分:用于处理医用材料的灭菌器和清洗消毒器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement,control and laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
![]() |
|
![]() |
GB/T 25435-2010 精细过滤纸板(中英文版) Fine filtration board |
![]() |
|
![]() |
GB/T 16475-2008 变形铝及铝合金状态代号(中英文版) Temper designation system for wrought aluminium and aluminium alloy |
![]() |
|
![]() |
GB/T 36151-2018 航空用铝合金通孔镶嵌件(中英文版) Aluminium alloy open type inserts for aviation |
![]() |
|
![]() |
GB/T 43316.6-2023 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法(中英文版) Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method |
![]() |
|
![]() |
GB 50861-2013 城市轨道交通工程工程量计算规范(中英文版) Standard method of measurement for urban transit railway works |
![]() |
|
![]() |
GB/T 1251.2-2006 人类工效学 险情视觉信号 一般要求、设计和检验(中英文版) Ergonomics - Visual danger signals - General requirements,design and testing |
![]() |
|
![]() |
GB/T 34696-2017 废弃化学品收集技术指南(中英文版) Technical guide for collecting disused chemical |
![]() |
|
![]() |
GB/T 32250.4-2022 农林机械 在用喷雾机的检测 第4部分:固定式和半移动式喷雾机(中英文版) Agricultural and forestry machinery Testing of sprayers in use Part 4: Stationary and semi-mobile sprayers |
![]() |
|
![]() |
GB 50535-2009 煤矿井底车场设计规范(中英文版) Code for design of pit bottom of coal mine |
![]() |
|
![]() |
GB/T 3808-2002 摆锤式冲击试验机的检验(中英文版) Verification of pendulum-type impact testing machines |
![]() |
|
![]() |
GB/T 35131-2017 油茶籽饼、粕(中英文版) Oil-tea camellia seed cake and meal |
![]() |
|
![]() |
GB 8787-1988 职业性急性光气中毒诊断标准及处理原则(中英文版) Diagnostic criteria and principles of management of occupational acute phosgene poisoning |
![]() |
|
![]() |
GB/T 29047-2021 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件(中英文版) Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes |
![]() |
|
![]() |
GB/T 28046.4-2011 道路车辆 电气及电子设备的环境条件和试验 第4部分:气候负荷(中英文版) Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads |
![]() |
|
![]() |
GB 50176-2016 民用建筑热工设计规范(中英文版) Code for thermal design of civil building |
![]() |
|
![]() |
GB/T 1043.1-2008 塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验(中英文版) Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test |
![]() |
|
![]() |
GB/T 40651-2021 信息安全技术 实体鉴别保障框架(中英文版) Information security technique—Entity authentication assurance framework |
![]() |
|
![]() |
GB 4706.97-2008 家用和类似用途电器的安全 电击动物设备的特殊要求(中英文版) Household and similar electrical appliances - Safety - Particular requirements for electrical animal-stunning equipment |
![]() |
|
![]() |
GB/T 18915.1-2013 镀膜玻璃 第1部分:阳光控制镀膜玻璃(中英文版) Coated glass-Part 1: Solar control coated glass |
![]() |
|
![]() |
GB 17378.3-2007 海洋监测规范 第3部分:样品采集、贮存与运输(中英文版) The specification for marine monitoring Part 3:Sample collection,storage and transportation |
![]() |
|
![]() |
GB/T 31745-2015 高耐磨漆饰实木地板(中英文版) Wear-resisting varnished solid wood flooring |
![]() |
|
![]() |
GB/T 5211.3-2020 颜料和体质颜料通用试验方法 第3部分:105℃挥发物的测定(中英文版) General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ |
![]() |
|
![]() |
GB 25559-2010 食品安全国家标准 食品添加剂 磷酸二氢钙(中英文版) National Food Safety Standard-Food Additives-Calcium dihydrogen phosphate |
![]() |
|
![]() |
GB/T 17127.4-2003 农业轮式拖拉机和机具 三点悬挂挂接器 第4部分: 杆式挂接器(中英文版) Agriculturalwheeled tractors and implements--Three-point hitch couplers--Part 4: Bar coupler |
![]() |
|
![]() |
GB/T 2423.39-2018 环境试验-第2部分:试验方法-试验Ee和导则:散装货物试验包含弹跳(中英文版) Environmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce |
![]() |
|
![]() |
GB/T 27917.2-2023 快递服务 第2部分:组织要求(中英文版) Courier Services Part 2: Organizational Requirements |
![]() |
|
![]() |
GB/T 29379-2012 马铃薯脱毒种薯贮藏、运输技术规程(中英文版) Code of practice for virus free seed potatoes storage and transportation |
![]() |
|
![]() |
GB/T 35818-2018 林业生物质原料分析方法 多糖及木质素含量的测定(中英文版) Standard method for analysis of forestry biomass-Determination of structural polysaccharides and lignin |
![]() |
|
![]() |
GB/T 23247-2023 自动剖面漂流浮标(中英文版) Automatic profile drifting buoy |
![]() |
|
![]() |
GB/T 4885-2009 正态分布完全样本可靠度置信下限(中英文版) Lower confidence limit of reliability for complete sample from normal distribution |
![]() |
|
![]() |
GB/T 13849.5-1993 聚烯烃绝缘聚烯烃护套市内通信电缆 第5部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、隔离式(内屏蔽)、挡潮层聚乙烯护套市内通信电缆(中英文版) Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 5:Moisture barrier polyethylene sheathed and seperated(inner-screened)local telecommunication cables with copper conductors and solid or cellular polyolefin insulation |
![]() |
|
![]() |
GB/T 4074.3-2008 绕组线试验方法 第3部分:机械性能(中英文版) Winding wires - Test methods - Part 3: Mechanical properties |
![]() |
|
![]() |
GB/T 33669-2017 极端降水监测指标(中英文版) Monitoring indices of precipitation extremes |
![]() |
|
![]() |
GB/T 41837-2022 温泉服务 温泉水质要求(中英文版) Hot Spring Service Hot Spring Water Quality Requirements |
![]() |
|
![]() |
GB 28126-2011 吡虫啉原药(中英文版) Imidacloprid technical material |
![]() |
|
![]() |
GB/T 20127.6-2006 钢铁及合金 痕量元素的测定 第6部分:没食子酸-示波极谱法测定锗含量(中英文版) Steel and alloy - Determination of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method |
![]() |
|
![]() |
GB/T 33041-2016 中国陆地木材腐朽与白蚁危害等级区域划分(中英文版) Decay and termite hazard zone for above-ground applications of wood in China |
![]() |
|
![]() |
GB/T 4140-2003 输送用平顶链和链轮(中英文版) Flat-top chains and associated chain wheels for conveyors |
![]() |
|
![]() |
GB/T 41149-2021 基础地理信息数据质量要求与评定(中英文版) Specifications for quality requirements and evaluation of fundamental geographic information data |
![]() |
|
![]() |
GB/T 23278.3-2009 锡酸钠化学分析方法 第3部分:砷量的测定 砷锑钼蓝分光光度法(中英文版) Methods for chemical analysis of sodium stannate - Part 3: Determination of arsenic content - Molybdoantimonyarsenate blue spectrophotometric method |
![]() |
|
![]() |
GB/T 8026-2014 石油蜡和石油脂滴熔点测定法(中英文版) Standard test method for drop melting point of petroleum wax,including petrolatum |
![]() |
|
![]() |
GB 51139-2015 纤维素纤维用浆粕工厂设计规范(中英文版) Code for design of pulp plant for cellulose fibre |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [361] [362] [363] [364] [365] [366] [367] |