中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 920-2002 公路路面等级与面层类型代码(中英文版) Code for classification and type of highwaypavement |
![]() |
|
![]() |
GB/T 26120-2010 低压不锈钢螺纹管件(中英文版) Pipework - Stainless steel threaded fittings |
![]() |
|
![]() |
GB/T 36463.2-2019 信息技术服务 咨询设计 第2部分:规划设计指南(中英文版) Information technology service—Consulting and design—Part 2:Guidance for planning and design |
![]() |
|
![]() |
GB/T 44042-2024 船舶水下辐射噪声测量方法(中英文版) Method for measuring underwater radiated noise of ships |
![]() |
|
![]() |
GB/T 36368-2018 业务需求规范 跨行业发票开具过程(中英文版) Business requirements specification—Cross industry invoicing process |
![]() |
|
![]() |
GB/T 4325.7-2013 钼化学分析方法 第7部分:铁量的测定 邻二氮杂菲分光光度法和电感耦合等离子体发射光谱法(中英文版) Methods for chemical analysis of molybdenum - Part 7: Determination of iron content - 1,10-phenanthroline spectrophotometry and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 3883.402-2023 手持式、可移式电动工具和园林工具的安全 第402部分:修枝剪的专用要求(中英文版) Safety of hand-held and portable power tools and garden tools Part 402: Particular requirements for pruning shears |
![]() |
|
![]() |
GB/T 7898-1987 杠杆式吨位天平(中英文版) Tonnage lever balance |
![]() |
|
![]() |
GB/T 15881-1995 电子设备用电位器 第3部分:空白详细规范 旋转式精密电位器 评定水平E(中英文版) Potentiometers for use in electronic equipment--Part 3:Blank detail specification--Rotary precision potentiometers--Assessment level E |
![]() |
|
![]() |
GB/T 24791.3-2009 摄影 医疗X射线成像用屏/片系统的感光测定 第3部分:乳腺X射线成像感光特性曲线形状、感光度与平均斜率的测定(中英文版) Photography - Sensitometry of screen/film systems for medical radiography - Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography |
![]() |
|
![]() |
GB/T 21958-2017 轮式拖拉机 前驱动桥(中英文版) Wheeled tractor—Front drive axle |
![]() |
|
![]() |
GB/T 41274-2022 可编程控制系统内生安全体系架构(中英文版) Programmable Control System Endogenous Safety Architecture |
![]() |
|
![]() |
GB/T 21547.3-2008 VME总线对仪器的扩展 第3部分:TCP/IP-IEEE488.1 接口规范(中英文版) VMEbus Extensions for instrumentation - Part 3: TCP/IP-IEEE488.1 Interface specification |
![]() |
|
![]() |
GB/T 18972-2003 旅游资源分类、调查与评价(中英文版) Classification,investigation and evaluation of tourism resources |
![]() |
|
![]() |
GB/T 35486-2017 物流仓储配送中心螺旋箱式输送机技术规范(中英文版) Specification of spiral-conveyer for logistics warehousing distribution center |
![]() |
|
![]() |
GB/T 27976-2011 水泥工业管磨装备(中英文版) Tube mill equipment for cement industry |
![]() |
|
![]() |
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
![]() |
|
![]() |
GB/T 16886.17-2005 医疗器械生物学评价 第17部分:可沥滤物允许限量的建立(中英文版) Biological evaluation of medical devices -- Part 17: Establishment of allowable limits for leachable substances |
![]() |
|
![]() |
GB/T 23466-2009 护听器的选择指南(中英文版) Guideline for selection of hearing protectors |
![]() |
|
![]() |
GB/T 1443-2016 机床和工具柄用自夹圆锥(中英文版) Self-holding tapers for machine tools and tool shanks |
![]() |
|
![]() |
GB/T 39028-2020 纺织机械与附件 罗拉式梳理成网机 术语和定义(中英文版) Textile machinery and accessories—Web roller cards—Terms and definitions |
![]() |
|
![]() |
GB/T 30869-2014 太阳能电池用硅片厚度及总厚度变化测试方法(中英文版) Test method for thickness and total thickness variation of silicon wafers for solar cell |
![]() |
|
![]() |
GB/T 16569-1996 畜禽产品消毒规范(中英文版) Disinfection requirement for livestock and poultry products |
![]() |
|
![]() |
GB/T 26259-2010 废弃通信产品再使用技术要求(中英文版) Technical requirements of reuse for the waste telecommunication equipment |
![]() |
|
![]() |
GB/T 20899.3-2019 金矿石化学分析方法 第3部分:砷量的测定(中英文版) Methods for chemical analysis of gold ores—Part 3:Determination of arsenic content |
![]() |
|
![]() |
GB/T 22033-2008 信息技术 嵌入式系统术语(中英文版) Information technology - Terminology for embedded systems |
![]() |
|
![]() |
GB/T 12604.9-2008 无损检测 术语 红外检测(中英文版) Non-destructive testing - Terminology - Terms used in infrared testing |
![]() |
|
![]() |
GB 5135.5-2003 自动喷水灭火系统 第5部分: 雨淋报警阀(中英文版) Automatic sprinkler system--Part5: Deluge alarm valves |
![]() |
|
![]() |
GB/T 36218-2018 船舶生产企业主要耗能设备管理要求(中英文版) Management requirements of main energy consumption equipment for shipbuilding enterprises |
![]() |
|
![]() |
GB/T 11064.4-2013 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第4部分:钾量和钠量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 4: Determination of potassium and sodium content - Flame atomic absorption spectrometric method |
![]() |
|
![]() |
GB/T 43326.4-2023 抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求(中英文版) Snow blowers - Safety requirements and test methods - Part 4: Additional national and regional requirements |
![]() |
|
![]() |
GB/T 20511-2006 耐火制品分型规则(中英文版) Refractory products - Rules of model |
![]() |
|
![]() |
GB/T 50600-2010 渠道防渗工程技术规范(中英文版) Technical code for seepage control engineering on canal |
![]() |
|
![]() |
GB/T 18636-2017 蓝舌病诊断技术(中英文版) Diagnostic techniques for bluetongue |
![]() |
|
![]() |
GB/T 1115-2022 圆柱形铣刀(中英文版) Cylindrical milling cutter |
![]() |
|
![]() |
GB/T 7065-1997 纺织品 色牢度试验 耐热水色牢度(中英文版) Textiles--Tests for colour fastness--Colour fastness to hot water |
![]() |
|
![]() |
GB/T 35308-2017 太阳能电池用锗基Ⅲ-Ⅴ族化合物外延片(中英文版) Epitaxial wafers of germanium based Ⅲ-Ⅴcompounds for solar cell |
![]() |
|
![]() |
GB/T 50743-2012 工程施工废弃物再生利用技术规范(中英文版) Code for recycling of construction & demolition waste |
![]() |
|
![]() |
GB/T 40326-2021 实验室设备能效等级 药品稳定性试验箱(中英文版) Energy efficiency grades for laboratory equipment—Drug stability test chambers |
![]() |
|
![]() |
GB/T 1033.1-2008 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法(中英文版) Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method |
![]() |
|
![]() |
GB/T 23595.4-2009 白光LED灯用稀土黄色荧光粉试验方法 第4部分:热稳定性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 4: Determination of thermostability |
![]() |
|
![]() |
GB/T 7735-2004 钢管涡流探伤检验方法(中英文版) Steel tubes--The inspection method on eddy current test |
![]() |
|
![]() |
GB/T 3216-2016 回转动力泵 水力性能验收试验 1级、2级和3级(中英文版) Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1,2 and 3 |
![]() |
|
![]() |
GB/T 40568-2021 纳米技术 多壁碳纳米管的表征 介观形状因子(中英文版) Nanotechnologies—Characterization of multiwall carbon nanotubes—Mesoscopic shape factors |
![]() |
|
![]() |
GB/T 31109-2014 乐器声学品质评价方法(中英文版) Method of evaluation for acoustic quality of musical instrument |
![]() |
|
![]() |
GB/T 8321.8-2007 农药合理使用准则(八)(中英文版) Guideline for safety application of pesticides (VIII) |
![]() |
|
![]() |
GB/T 21223.2-2015 老化试验数据统计分析导则 第2部分:截尾正态分布数据统计分析的验证程序(中英文版) Guide for the statistical analysis of ageing test data—Part 2: Validation of procedures for statistical analysis of censored normally distributed data |
![]() |
|
![]() |
GB/T 26324-2010 羟基亚乙基二膦酸(中英文版) 1-Hydroxyethylidene-1,1-diphosphonate acid |
![]() |
|
![]() |
GB/T 39249-2020 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验(中英文版) Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test |
![]() |
|
![]() |
GB/T 17339-1998 汽车安全玻璃耐化学浸蚀性和耐温度变化性试验方法(中英文版) Road vehicles--Safety glazing materials--Test methods for resistant-to-chemicals and resistant-to-temperature changes |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [493] [494] [495] [496] [497] [498] [499] |