网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 25445-2010
抑制爆炸系统(中英文版)
Explosion suppression systems
GB/T 25774.2-2016
焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验(中英文版)
Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel
GB/T 38924.5-2020
民用轻小型无人机系统环境试验方法 第5部分:冲击试验(中英文版)
Environmental test methods for civil small and light unmanned aircraft system—Part 5: Shock test
GB/T 29348-2012
法庭科学枪械射击弹头痕迹检验规范(中英文版)
Examination standard for bullet marks in firearms discipline of forensic science
GB/T 38265.1-2019
软钎剂试验方法 第1部分:不挥发物质含量的测定 重量法(中英文版)
Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method
GB/T 11162-2009
光学分划零件通用技术条件(中英文版)
General specification of optical components for the scale and surface defects
GB/T 7095.5-2008
漆包铜扁绕组线 第5部分:240级芳族聚酰亚胺漆包铜扁线(中英文版)
Enamelled rectangular copper winding wires - Part 5:Aromatic polyimide enamelled rectangular copper wire, class 240
GB/T 18845-2002
磨料 筛分试验机(中英文版)
Abrasive grains--Test-sieving machines
GB/T 36234-2018
钛及钛合金、锆及锆合金熔化焊焊工技能评定(中英文版)
Qualification testing of welders for fusion welding ontitanium and titanium alloys,zirconium and zirconium alloys
GB/T 12627-1990
软磁盘驱动器通用技术条件(中英文版)
Generic specification for flexible disk drive
GB/T 12428-2023
客车装载质量计算方法(中英文版)
Calculation method of passenger car loading mass
GB/T 20534-2006
基于XML的运输工具到达通知报文(中英文版)
Means of transport arrival advice message based on XML
GB 28011-2011
鞋类钢勾心(中英文版)
Shanks for footwear
GB/T 34723-2017
不饱和聚酯树脂装饰人造板残留苯乙烯单体含量测定 气相色谱法(中英文版)
Residual styrene monomer content determination in unsaturated polyester decorative wood-based panels by gas chromatography
GB/T 17999.7-2008
SPF鸡 微生物学监测 第7部分:SPF鸡 胚敏感试验(中英文版)
SPF chicken - Microbiological surveillance - Part 7: Embryo susceptibility test for SPF chicken
GB/T 26610.2-2022
承压设备系统基于风险的检验实施导则 第2部分:基于风险的检验策略(中英文版)
Implementation guidelines for risk-based inspection of pressure equipment systems Part 2: Risk-based inspection strategy
GB/T 30310-2013
化学纤维帘线、纱线和线绳附胶量测定的试验方法(中英文版)
Determination of dip solids pickup on yarns and cords of synthetic fiber
GB/T 35408-2017
电子商务质量管理 术语(中英文版)
Quality management in E-commerce—Terminology
GB/T 40392-2021
循环冷却水中军团菌的检测(中英文版)
Detection of Legionella in circulating cooling water
GB 25542-2010
食品安全国家标准 食品添加剂 甘氨酸(氨基乙酸)(中英文版)
National Food Safety Standard-Food Additives-Glycine (glycine)
GB/T 22250-2008
保健食品中绿原酸的测定(中英文版)
Determination of chlorogenic acid in health foods
GB/T 32831-2016
高能激光光束质量评价与测试方法(中英文版)
Evaluation and test methods for beam quality of high energy laser
GB/T 5556-2003
表面活性剂 耐碱性测试法(中英文版)
Surface active agents--Test method for alkaline stability
GB/T 40784.1-2021
信息技术 用于互操作和数据交换的生物特征识别轮廓 第1部分:生物特征识别系统概述和生物特征识别轮廓(中英文版)
Information technology. Biometric profiles for interoperability and data interchange -- Part 1: Overview of biometric systems and biometric profiles
GB/T 6742-2007
色漆和清漆 弯曲试验(圆柱轴)(中英文版)
Paints and varnishes - Bend test (cylindrical mandrel)
GB 29386-2012
溴氰菊酯乳油(中英文版)
Deltamethrin emulsifiable concentrates
GB/T 31858-2015
眼部护肤化妆品中禁用水溶性着色剂酸性黄 1和酸性橙 7的测定 高效液相色谱法(中英文版)
Simultaneous determination of acid yellow 1 and acid orange 7 prohibited using in eye cosmetics—High performance liquid chromatography
GB/T 39493-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力调节装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure regulators
GB/T 24447-2009
纸浆 纤维粗度的测定 偏振光法(中英文版)
Pulp - Determination of fiber coarseness - Polarized light method
GB/T 25121.3-2018
轨道交通-机车车辆设备-电力电子电容器-第3部分:双电层电容器(中英文版)
Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 3:Electric double-layer capacitors
GB/T 43494-2023
轮胎用射频识别(RFID)电子标签编码(中英文版)
Radio frequency identification (RFID) electronic tag encoding for tires
GB 28146-2011
3%赤霉酸乳油(中英文版)
3% Gibberellic acid emulsifiable concentrates
GB/T 35794-2018
民用飞机氧气系统安全性设计(中英文版)
Safety design for oxygen system of civil aircraft
GB/T 17159-2009
大地测量术语(中英文版)
Geodetic terms
GB/T 6609.25-2004
氧化铝化学分析方法和物理性能测定方法 松装密度的测定(中英文版)
Chemical analysismethods and determination of physical performance of alumina--Determination of untamped density
GB/T 42771-2023
儿童福利机构康复辅助器具配置规范(中英文版)
Specifications for configuration of rehabilitation aids in child welfare institutions
GB/T 13774-1992
纺织品机织物组织代码及示例(中英文版)
Textiles--Weaves--Coding system and examples
GB 7000.2-2008
灯具 第2-22部分:特殊要求 应急照明灯具(中英文版)
Luminaires - Part 2-22: Particular requirements-luminaires for emergency lighting
GB 50936-2014
钢管混凝土结构技术规范(中英文版)
Technical code for concrete filled steel tubular structures
GB/T 33820-2017
金属材料 延性试验 多孔状和蜂窝状金属高速压缩试验方法(中英文版)
Metallic materials—Ductility testing—High speed compression test for porous and cellular metals
GB/T 41750-2022
钛及钛合金方形和矩形管材(中英文版)
Titanium and titanium alloy square and rectangular tubes
GB/T 3871.3-2006
农业拖拉机 试验规程 第3部分:动力输出轴功率试验(中英文版)
Agricultural tractors - Test procedures Part 3: Power tests for power take-off
GB 26131-2010
硝酸工业污染物排放标准(中英文版)
Emission standard of pollutants for nitric acid industry
GB/T 33103-2016
氧化铝型硫磺回收催化剂活性试验方法(中英文版)
Test method of activity for alumium oxide type sulfur recovery catalyst
GB/T 41053-2021
全断面隧道掘进机 土压平衡-泥水平衡双模式掘进机(中英文版)
Full face tunnel boring machine—Dual modes (earth pressure balanced and slurry balanced) tunnel boring machine
GB/T 16840.6-2012
电气火灾痕迹物证技术鉴定方法 第6部分:SEM微观形貌分析法(中英文版)
Technical determination methods for electrical fire evidence - Part 6:Micro-morphological analysis method using scanning electron microscope
GB/T 5169.15-2015
电工电子产品着火危险试验 第15部分:试验火焰 500W火焰 装置和确认试验方法(中英文版)
Fire hazard testing for electric and electronic products—Part 15: Test flames—500W flames—Apparatus and confirmational test methods
GB/T 39597-2020
出租汽车综合服务区规范(中英文版)
Specification for taxi integrated service area
GB/T 4315.2-2009
光学传递函数 第2部分:测量导则(中英文版)
Optical transfer function - Part 2: Directives of measurement
GB/T 22040-2008
公路沿线设施塑料制品耐候性要求及测试方法(中英文版)
Technical requirements and determination of weathering quality for plastics of highway furnatures

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [673] [674] [675] [676] [677] [678] [679]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved