中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 41312.1-2022 化工用设备渗透性检测方法 第1部分:石墨及其衬里设备(中英文版) Test method for permeability of chemical equipment - Part 1: Graphite and its lining equipment |
![]() |
|
![]() |
GB/T 12322-1990 通用型应用电视设备可靠性试验方法(中英文版) Methods of reliability testing for universal CCTV systems |
![]() |
|
![]() |
GB/T 22459.7-2008 耐火泥浆 第7部分:高温性能试验方法(中英文版) Refractory mortars - Part 7: Determination of properties at elevated temperatures |
![]() |
|
![]() |
GB/T 1967-1996 多孔陶瓷孔道直径试验方法(中英文版) Test method for pore diameter of porous ceramic |
![]() |
|
![]() |
GB/T 35517-2017 化学品 鱼类生殖毒性短期试验方法(中英文版) Chemicals—Fish short term reproduction toxicity assay |
![]() |
|
![]() |
GB/T 10357.2-2013 家具力学性能试验 第2部分:椅凳类稳定性(中英文版) Test of mechanical properties of furniture - Part 2:Stability of chairs and stools |
![]() |
|
![]() |
GB 5084-2021 农田灌溉水质标准(中英文版) Standard for irrigation water quality |
![]() |
|
![]() |
GB/T 25071-2010 珠宝玉石及贵金属产品分类与代码(中英文版) Classification and codes for products of gems and precious metals |
![]() |
|
![]() |
GB/T 3106-2016 紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度(中英文版) Fasteners—Bolts,screws and studs—Nominal lengths and thread lengths |
![]() |
|
![]() |
GB/T 39023-2020 书写和记号工具 降低窒息风险的笔套规范(中英文版) Writing and marking instruments—Specification for caps to reduce the risk of asphyxiation |
![]() |
|
![]() |
GB/T 4802.2-2008 纺织品 织物起毛起球性能的测定 第2部分:改型马丁代尔法(中英文版) Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method |
![]() |
|
![]() |
GB/T 28559-2012 超临界及超超临界汽轮机 叶片(中英文版) Supercritical and ultra-supercritical turbine - Blades |
![]() |
|
![]() |
GB/T 20647.3-2006 社区服务指南 第3部分:文化、教育、体育服务(中英文版) Guideline for community service - Part 3: Culture,education and sports service |
![]() |
|
![]() |
GB 18296-2019 汽车燃油箱及其安装的安全性能要求和试验方法(中英文版) Safety property requirements and test methods for automobile fuel tank and its installation |
![]() |
|
![]() |
GB/T 23649-2009 印刷技术 过程控制 印刷用反射密度计的光学、几何学和测量学要求(中英文版) Graphic technology - Process control - Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use |
![]() |
|
![]() |
GB/T 4023-1997 半导体器件 分立器件和集成电路 第2部分:整流二极管(中英文版) Semiconductor devices--Discrete devices and integrated circuits--Part 2:Rectifier diodes |
![]() |
|
![]() |
GB/T 35047-2018 公共安全 大规模疏散 规划指南(中英文版) Societal security—Mass evacuation-Guidelines for planning |
![]() |
|
![]() |
GB/T 31308.2-2014 商业、工业和行政的过程、数据元和单证 长效签名规范 第2部分:XML高级电子签名(XAdES)的长效签名规范(中英文版) Processes, data elements and documents in commerce, industry and administration―Long term signature profiles―Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES) |
![]() |
|
![]() |
GB/T 43438-2023 信息技术 学习、教育和培训 中小学教师信息素养评价指南(中英文版) Information Technology Learning, Education and Training Guidelines for the Assessment of Information Literacy for Primary and Secondary School Teachers |
![]() |
|
![]() |
GB/T 17862-1999 办公机械 速印机用蜡纸 基本加印内容及安装特性(中英文版) Office equipment--Stencils for duplicator--Minimum overprint and attachment features |
![]() |
|
![]() |
GB/T 26492.5-2011 变形铝及铝合金铸锭及加工产品缺陷 第5部分:管材、棒材、型材、线材缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - Part 5: Defects for tubes,rods or bars,profiles,wires |
![]() |
|
![]() |
GB/T 27021.1-2017 合格评定 管理体系审核认证机构要求 第1部分:要求(中英文版) Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements |
![]() |
|
![]() |
GB/T 4910-2022 镀锡圆铜线(中英文版) Tinned round copper wire |
![]() |
|
![]() |
GB/T 16991-2008 纺织品 色牢度试验 高温耐人造光色牢度及抗老化性能 氙弧(中英文版) Textiles - Test for colour fastness - Colour fastness and ageing to artificial light at high temperatures: Xenon arc |
![]() |
|
![]() |
GB 10783-2008 食品添加剂 辣椒红(中英文版) Food additive - Paprika red |
![]() |
|
![]() |
GB/T 35112-2017 农业用腐殖酸和黄腐酸原料制品 分类(中英文版) Humic-acids and fulvic-acids materials products for agricultural use—Classification |
![]() |
|
![]() |
GB/T 18373-2013 印制板用E玻璃纤维布(中英文版) E-glass fabric woven for printed boards |
![]() |
|
![]() |
GB/T 3215-2007 石油、重化学和天然气工业用离心泵(中英文版) centrifugal pumps for petroleum petrochemical and natural gas industries |
![]() |
|
![]() |
GB/T 33863.10-2021 OPC统一架构 第10部分:程序(中英文版) OPC unified architecture—Part 10: Programs |
![]() |
|
![]() |
GB/T 13580.9-1992 大气降水中氯化物的测定 硫氰酸汞高铁光度法(中英文版) Determination of chloride in wet precipitation--Ferrithiocyanate spectrophotometry |
![]() |
|
![]() |
GB/T 25159-2010 包装术语 非危险货物用中型散装容器(中英文版) Intermediate bulk containers(IBCs)for non-dangerous goods - Terminology |
![]() |
|
![]() |
GB/T 5170.16-2005 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test |
![]() |
|
![]() |
GB 50388-2016 煤矿井下机车车辆运输信号设计规范(中英文版) Code for design of underground locomotive vehicle transport signal of coal mine |
![]() |
|
![]() |
GB/T 3836.29-2021 爆炸性环境 第29部分:爆炸性环境用非电气设备 结构安全型“c”、控制点燃源型“b”、液浸型“k”(中英文版) Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k” |
![]() |
|
![]() |
GB/T 18310.18-2001 纤维光学互连器件和无源器件 基本试验和测量程序 第2-18部分:试验 干热 高温耐久性(中英文版) Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-18:Tests--Dry heat--High temperatureendurance |
![]() |
|
![]() |
GB/T 31757-2015 户外用防腐实木地板(中英文版) Preservative-treated wood decking |
![]() |
|
![]() |
GB/T 28832-2012 国际货运单证缮制质量要求(中英文版) Requirments on services of preparation for international freight forwarding documents |
![]() |
|
![]() |
GB/T 15159-2020 贵金属及其合金复合带材(中英文版) Composite material strips of precious metals and their alloys |
![]() |
|
![]() |
GB/T 23963-2009 工业用二乙胺(中英文版) Diethylamine for industrial use |
![]() |
|
![]() |
GB/T 6113.105-2018 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分:无线电骚扰和抗扰度测量设备-5MHz~18GHz天线校准场地和参考试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
![]() |
|
![]() |
GB/T 30665-2014 化学品 海水中的生物降解性 密闭瓶法(中英文版) Chemicals―Biodegradability in seawater―Closed bottle method |
![]() |
|
![]() |
GB/T 3756-2008 卡套式锥密封组合直通管接头(中英文版) 24° cone connectors - Swivel stud straight adapter with O-ring with stud end |
![]() |
|
![]() |
GB/T 29326-2023 包括变速应用的能效电动机的选择 应用导则(中英文版) Selection of energy efficient motors including variable speed applications Application Guidelines |
![]() |
|
![]() |
GB/T 26736-2011 道路车辆 制动衬片 耐水、盐水、油和制动液性能试验方法(中英文版) Road vehicles - Brake linings - Test method for resistance to water,saline solution,oil and brake fluid |
![]() |
|
![]() |
GB/T 20163-2006 中国档案机读目录格式(中英文版) China MARC format for archives |
![]() |
|
![]() |
GB/T 6113.402-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分: 不确定度、统计学和限值建模 测量设备和设施的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties, statistics and limit modelling—Measurement instrumentation uncertainty |
![]() |
|
![]() |
GB/T 42614-2023 滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定(中英文版) Sliding bearings - Determination of the limit value of σ0.01* for metal flangeless thin-walled bearing shells |
![]() |
|
![]() |
GB/T 10003-2008 普通用途双向拉伸聚丙烯(BOPP)薄膜(中英文版) Biaxially oriented polypropylene(BOPP) film for general use |
![]() |
|
![]() |
GB/T 2917.1-2002 以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其他酸性产物的测定 刚果红法(中英文版) Determination of compounds and products based on vingl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted temperatures--Congo red method |
![]() |
|
![]() |
GB/T 33752-2017 微阵列芯片用醛基基片(中英文版) Aldehyde slide for microarrays |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [920] [921] [922] [923] [924] [925] [926] |