“Method for Determina ” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 609-2018 化学试剂-总氮量测定通用方法（中英文版） Chemical reagents - General method for determination of total nitrogen |
 |
|
|
|
GB/T 11066.12-2024 金化学分析方法-第12-部分：-银、铜、铁、铅、铋、锑、镁、镍、锰、钯、铬、铂、铑、钛、锌、砷、锡、硅、钴、钙、钾、锂、钠、碲、钒、锆、镉、钼、铼、铝含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of gold - Part 12: - Determination of silver, copper, iron, lead, bismuth, antimony, magnesium, nickel, manganese, palladium, chromium, platinum, rhodium, titanium, zinc, arsenic, tin, silicon, cobalt, calcium, potassium, lithium, sodium, tellurium, vanadium, zirconium, cadmium, molybdenum, rhenium, and aluminum content - Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 12959-2024 水泥水化热测定方法（中英文版） Method for determination of heat of hydration of cement |
|
|
|
|
GB/T 13748.20-2024 镁及镁合金化学分析方法-第20部分：元素含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for magnesium and magnesium alloys-Part 20: Determination of element content-Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 13930-2024 水环真空泵和水环压缩机-气量测定方法（中英文版） Water ring vacuum pumps and water ring compressors-Methods for determination of gas volume |
|
|
|
|
GB/T 16477.1-2024 稀土硅铁合金及镁硅铁合金化学分析方法-第1部分：稀土总量、十五个稀土元素含量的测定（中英文版） Chemical analysis methods for rare earth ferrosilicon alloys and magnesium ferrosilicon alloys-Part 1: Determination of total rare earth content and fifteen rare earth elements |
|
|
|
|
GB/T 23561.11-2024 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法（中英文版） Methods for determination of physical and mechanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock |
|
|
|
|
GB/T 23561.1-2024 煤和岩石物理力学性质测定方法-第1部分：采样一般规定（中英文版） Methods for determination of physical and mechanical properties of coal and rock - Part 1: General provisions for sampling |
|
|
|
|
GB/T 4103.18-2024 铅及铅合金化学分析方法-第18部分：银、铜、铋、砷、锑、锡、锌、铁、镉、镍、镁、铝、钙、硒和碲含量的测定-电感耦合等离子体质谱法（中英文版） Methods for chemical analysis of lead and lead alloys - Part 18: Determination of silver, copper, bismuth, arsenic, antimony, tin, zinc, iron, cadmium, nickel, magnesium, aluminum, calcium, selenium and tellurium content - Inductively coupled plasma mass spectrometry |
|
|
|
|
GB/T 42513.6-2024 镍合金化学分析方法-第6部分：钼含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for nickel alloys-Part 6: Determination of molybdenum content-Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 42513.7-2024 镍合金化学分析方法-第7部分：钴、铬、铜、铁和锰含量的测定-火焰原子吸收光谱法（中英文版） Chemical analysis methods for nickel alloys-Part 7: Determination of cobalt, chromium, copper, iron and manganese content-Flame atomic absorption spectrometry |
|
|
|
|
GB/T 43859-2024 水分活度仪性能测定方法（中英文版） Water Activity Meter Performance Determination Method |
|
|
|
|
GB/T 43877-2024 铁矿石-同化性能测定方法（中英文版） Iron ore - determination method of assimilation performance |
|
|
|
|
GB/T 43905.1-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分：电弧焊中烟尘排放速率的测定和分析用烟尘的收集（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis |
|
|
|
|
GB/T 43905.2-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging |
|
|
|
|
GB/T 43905.3-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding |
|
|
|
|
GB/T 43905.6-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分：电阻点焊中烟尘和气体的定量化测定（中英文版） Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding |
|
|
|
|
GB/T 5121.8-2024 铜及铜合金化学分析方法-第8部分：氧、氮、氢含量的测定（中英文版） Chemical analysis methods for copper and copper alloys - Part 8: Determination of oxygen, nitrogen and hydrogen content |
|
|
|
|
GB/T 23561.8-2024 煤和岩石物理力学性质测定方法-第8部分：煤和岩石变形参数测定方法（中英文版） Methods for determination of physical and mechanical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock |
|
|
|
|
GB/T 43603.3-2024 镍铂靶材合金化学分析方法-第3部分：碳含量的测定-高频红外检测法-（中英文版） Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method - |
|
|
|
|
GB/T 43603.2-2024 镍铂靶材合金化学分析方法-第2部分：镁、铝、钛、钒、铬、锰、铁、钴、铜、锌、锆、银、钯、锡、钐、铅、硅含量的测定-电感耦合等离子体质谱法-（中英文版） Chemical analysis methods for nickel-platinum target alloys - Part 2: Determination of magnesium, aluminum, titanium, vanadium, chromium, manganese, iron, cobalt, copper, zinc, zirconium, silver, palladium, tin, samarium, lead, silicon content - inductively coupled plasma mass spectrometry - |
|
|
|
|
GB/T 43753.4-2024 贵金属合金电镀废水化学分析方法-第4部分：氯离子含量的测定-氯化银浊度法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater - Part 4: Determination of chloride ion content - silver chloride turbidity method |
|
|
|
|
GB/T 43753.3-2024 贵金属合金电镀废水化学分析方法-第3部分：硫酸盐含量的测定-硫酸钡重量法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 3: Sulfate content Determination of - barium sulfate gravimetric method |
|
|
|
|
GB/T 43753.2-2024 贵金属合金电镀废水化学分析方法-第2部分：锌、锰、铬、镉、铅、铁、铝、镍、铜、铍含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 2: Determination of zinc, manganese, chromium, cadmium, lead, iron, aluminum, nickel, copper and beryllium content-Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 43753.1-2024 贵金属合金电镀废水化学分析方法-第1部分：金、银、铂、钯、铱含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 1: Determination of gold, silver, platinum, palladium and iridium content-Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 43748-2024 微束分析-透射电子显微术-集成电路芯片中功能薄膜层厚度的测定方法（中英文版） Microbeam analysis-Transmission electron microscopy-Method for determination of thickness of functional thin film layers in integrated circuit chips |
|
|
|
|
GB/T 43781-2024 信息技术-系统间远程通信和信息交换-视联网系统要求（中英文版） Method for determination of dispersion properties of water treatment agents-Part 1: Dispersed kaolin method |
|
|
|
|
GB/T 43789.32-2024 电子纸显示器件-第3-2部分：光电性能测试方法（中英文版） Determination of silver content in silver paste for solar cells - Thiocyanate standard solution titration method |
|
|
|
|
GB/T 43610-2023 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法（中英文版） Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent growth direction of linear crystals |
|
|
|
|
GB/T 43604.1-2023 镓基液态金属化学分析方法 第1部分：铅、镉、汞、砷含量的测定 电感耦合等离子体质谱法（中英文版） Methods for chemical analysis of gallium-based liquid metals Part 1: Determination of lead, cadmium, mercury and arsenic contents Inductively coupled plasma mass spectrometry |
|
|
|
|
GB/T 43603.1-2023 镍铂靶材合金化学分析方法 第1部分:铂含量的测定 电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of nickel-platinum target alloys Part 1: Determination of platinum content Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 43573-2023 服装散热性能的测定方法 出汗暖体假人法（中英文版） Method for determination of heat dissipation performance of clothing - sweating body warming dummy method |
|
|
|
|
GB/T 33393-2023 鞋类 整鞋试验方法 热阻和湿阻的测定（中英文版） Footwear - Test methods for complete shoes - Determination of thermal and moisture resistance |
|
|
|
|
GB/T 43282.2-2023 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法（中英文版） Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. |
|
|
|
|
GB/T 43363-2023 废弃化学品中铜、锌、镉、铅、铬等12种元素形态分布的测定 连续提取法（中英文版） Determination of form distribution of 12 elements including copper, zinc, cadmium, lead and chromium in waste chemicals. Continuous extraction method |
|
|
|
|
GB/T 42513.5-2023 镍合金化学分析方法 第5部分：钒含量测定 一氧化二氮-火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of nickel alloys Part 5: Determination of vanadium content Nitrous oxide-flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 42513.4-2023 镍合金化学分析方法 第4部分：硅含量的测定 一氧化二氮-火焰原子吸收光谱法和钼蓝分光光度法（中英文版） Methods for chemical analysis of nickel alloys Part 4: Determination of silicon content Nitrous oxide-flame atomic absorption spectrometry and molybdenum blue spectrophotometry |
|
|
|
|
GB/T 42513.3-2023 镍合金化学分析方法 第3部分：铝含量的测定 一氧化二氮-火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of nickel alloys Part 3: Determination of aluminum content Nitrous oxide-flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 42513.2-2023 镍合金化学分析方法 第2部分：磷含量的测定 钼蓝分光光度法（中英文版） Methods for chemical analysis of nickel alloys Part 2: Determination of phosphorus content Molybdenum blue spectrophotometry |
|
|
|
|
GB/T 6150.3-2023 钨精矿化学分析方法 第3部分：磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of tungsten concentrates Part 3: Determination of phosphorus content Phosphomolybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 6150.1-2023 钨精矿化学分析方法 第1部分：三氧化钨含量的测定 钨酸铵灼烧重量法（中英文版） Methods for chemical analysis of tungsten concentrates Part 1: Determination of tungsten trioxide content Ammonium tungstate ignition gravimetric method |
|
|
|
|
GB/T 4324.2-2023 钨化学分析方法 第2部分：铋和砷含量的测定（中英文版） Methods for chemical analysis of tungsten Part 2: Determination of bismuth and arsenic content |
|
|
|
|
GB/T 3260.11-2023 锡化学分析方法 第11部分：铜、铁、铋、铅、锑、砷、铝、锌、镉、银、镍和钴含量的测定 电感耦合等离子体原子发射光谱法（中英文版） Methods for chemical analysis of tin Part 11: Determination of copper, iron, bismuth, lead, antimony, arsenic, aluminum, zinc, cadmium, silver, nickel and cobalt content - Inductively coupled plasma atomic emission spectrometry |
|
|
|
|
GB/T 18115.6-2023 稀土金属及其氧化物中稀土杂质化学分析方法 第6部分：铕中镧、铈、镨、钕、钐、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定（中英文版） Methods for chemical analysis of rare earth impurities in rare earth metals and their oxides - Part 6: Determination of the amounts of lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium in europium |
|
|
|
|
GB/T 3286.12-2023 石灰石及白云石化学分析方法 第12部分：氧化钾和氧化钠含量的测定 火焰原子吸收光谱法（中英文版） Methods for chemical analysis of limestone and dolomite Part 12: Determination of potassium oxide and sodium oxide content Flame atomic absorption spectrometry |
|
|
|
|
GB/T 43098.2-2023 水处理剂分析方法 第2部分：砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS)（中英文版） Analysis methods for water treatment agents Part 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) |
|
|
|
|
GB/T 23948-2023 无机化工产品 水不溶物测定通用方法（中英文版） Inorganic chemical products - general method for determination of water-insoluble matter |
|
|
|
|
GB/T 23947.3-2023 无机化工产品中砷测定的通用方法 第3部分：原子荧光光谱法（中英文版） General method for determination of arsenic in inorganic chemical products Part 3: Atomic fluorescence spectrometry |
|
|
|
|
GB/T 17530.2-2023 工业丙烯酸及酯的试验方法 第2部分：工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法（中英文版） Test methods for industrial acrylic acid and esters Part 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography |
|
|
|
|
GB/T 43316.5-2023 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法（中英文版） Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method |
|
| 找到:1988條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 |
+86-755-2583-1330
