“Determination for re ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版（有 SALE 標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。
2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。


	GB/T 15597.2-2024 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定（中英文版） Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination
	GB/T 24189-2024 高炉用铁矿石-用最终还原度指数表示的还原性的测定（中英文版） Iron ore for blast furnaces - Determination of reducibility expressed as the final reduction index
	GB/T 609-2018 化学试剂-总氮量测定通用方法（中英文版） Chemical reagents - General method for determination of total nitrogen
	GB/T 13930-2024 水环真空泵和水环压缩机-气量测定方法（中英文版） Water ring vacuum pumps and water ring compressors-Methods for determination of gas volume
	GB/T 16477.1-2024 稀土硅铁合金及镁硅铁合金化学分析方法-第1部分：稀土总量、十五个稀土元素含量的测定（中英文版） Chemical analysis methods for rare earth ferrosilicon alloys and magnesium ferrosilicon alloys-Part 1: Determination of total rare earth content and fifteen rare earth elements
	GB/T 23561.11-2024 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法（中英文版） Methods for determination of physical and mechanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock
	GB/T 43877-2024 铁矿石-同化性能测定方法（中英文版） Iron ore - determination method of assimilation performance
	GB/T 43905.1-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分：电弧焊中烟尘排放速率的测定和分析用烟尘的收集（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis
	GB/T 43905.2-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging
	GB/T 43905.3-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定（中英文版） Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding
	GB/T 43905.6-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分：电阻点焊中烟尘和气体的定量化测定（中英文版） Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding
	GB/T 43603.3-2024 镍铂靶材合金化学分析方法-第3部分：碳含量的测定-高频红外检测法-（中英文版） Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method -
	GB/T 43753.4-2024 贵金属合金电镀废水化学分析方法-第4部分：氯离子含量的测定-氯化银浊度法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater - Part 4: Determination of chloride ion content - silver chloride turbidity method
	GB/T 43753.3-2024 贵金属合金电镀废水化学分析方法-第3部分：硫酸盐含量的测定-硫酸钡重量法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 3: Sulfate content Determination of - barium sulfate gravimetric method
	GB/T 43753.2-2024 贵金属合金电镀废水化学分析方法-第2部分：锌、锰、铬、镉、铅、铁、铝、镍、铜、铍含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 2: Determination of zinc, manganese, chromium, cadmium, lead, iron, aluminum, nickel, copper and beryllium content-Inductively coupled plasma atomic emission spectrometry
	GB/T 43753.1-2024 贵金属合金电镀废水化学分析方法-第1部分：金、银、铂、钯、铱含量的测定-电感耦合等离子体原子发射光谱法（中英文版） Chemical analysis methods for precious metal alloy electroplating wastewater-Part 1: Determination of gold, silver, platinum, palladium and iridium content-Inductively coupled plasma atomic emission spectrometry
	GB/T 43781-2024 信息技术-系统间远程通信和信息交换-视联网系统要求（中英文版） Method for determination of dispersion properties of water treatment agents-Part 1: Dispersed kaolin method
	GB/T 29282-2024 格拉辛纸（中英文版） Determination of astaxanthin, an effective ingredient in cosmetics - High performance liquid chromatography
	GB/T 13174-2021 衣料用洗涤剂去污力及循环洗涤性能的测定《第1号修改单》（中英文版） Determination of detergency and cycle washing performance of detergents for clothing "Revision No. 1"
	GB/T 43610-2023 微束分析分析电子显微术线状晶体表观生长方向的透射电子显微术测定方法（中英文版） Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent growth direction of linear crystals
	GB/T 33393-2023 鞋类整鞋试验方法热阻和湿阻的测定（中英文版） Footwear - Test methods for complete shoes - Determination of thermal and moisture resistance
	GB/T 43282.2-2023 塑料暴露于海水中塑料材料需氧生物分解的测定第2部分：采用测定密闭呼吸计内需氧量的方法（中英文版） Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer.
	GB/T 43276-2023 玩具材料中甲酰胺释放量的测定（中英文版） Determination of formamide release in toy materials
	GB/T 18115.6-2023 稀土金属及其氧化物中稀土杂质化学分析方法第6部分：铕中镧、铈、镨、钕、钐、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定（中英文版） Methods for chemical analysis of rare earth impurities in rare earth metals and their oxides - Part 6: Determination of the amounts of lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium in europium
	GB/T 43098.2-2023 水处理剂分析方法第2部分：砷、汞、镉、铬、铅、镍、铜含量的测定电感耦合等离子体质谱法(ICP-MS)（中英文版） Analysis methods for water treatment agents Part 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS)
	GB/T 23947.3-2023 无机化工产品中砷测定的通用方法第3部分：原子荧光光谱法（中英文版） General method for determination of arsenic in inorganic chemical products Part 3: Atomic fluorescence spectrometry
	GB/T 43316.5-2023 塑料耐环境应力开裂(ESC)的测定第5部分:恒定拉伸变形法（中英文版） Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method
	GB/T 42918.2-2023 塑料模塑和挤出用热塑性聚氨酯第2部分：试样制备和性能测定（中英文版） Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination
	GB 31660.9-2019 食品安全国家标准家禽可食性组织中乙氧酰胺苯甲酯残留量的测定高效液相色谱法（中英文版） National food safety standards - Determination of ethoxycarbamate residues in edible poultry tissues - High performance liquid chromatography
	GB 23200.117-2019 食品安全国家标准植物源性食品中喹啉铜残留量的测定高效液相色谱法（中英文版） National food safety standards Determination of copper quinoline residues in plant-derived foods High performance liquid chromatography
	GB/T 6324.12-2023 有机化工产品试验方法第12部分：有机液体化工产品微量汞的测定原子荧光法（中英文版） Test methods for organic chemical products Part 12: Determination of trace amounts of mercury in organic liquid chemical products Atomic fluorescence method
	GB/T 43184-2023 软木原料含水率测定方法（中英文版） Method for determination of moisture content of cork raw materials
	GB/T 43174-2023 农药种子处理制剂附着性测定方法（中英文版） Method for determination of adhesion of pesticide seed treatment preparations
	GB/T 43117-2023 玻璃纤维增强热固性塑料（GRP）管湿态或干态条件下环蠕变性能的测定（中英文版） Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions
	GB/T 43098.1-2023 水处理剂分析方法第1部分：磷含量的测定（中英文版） Methods for analysis of water treatment agents Part 1: Determination of phosphorus content
	GB/T 43085-2023 塑料聚合物分散体游离甲醛含量的测定（中英文版） Plastics Polymer dispersions Determination of free formaldehyde content
	GB/T 42998-2023 家具产品及其材料中禁限用物质测定方法醛酮类化合物（中英文版） Method for determination of prohibited and restricted substances in furniture products and their materials Aldehydes and ketones
	GB/T 18950-2023 橡胶和塑料软管实验室光源暴露试验法颜色、外观和其他物理性能变化的测定（中英文版） Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties.
	GB/T 18882.1-2023 离子型稀土矿混合稀土氧化物化学分析方法第1部分：十五个稀土元素氧化物配分量的测定（中英文版） Methods for chemical analysis of mixed rare earth oxides of ionic rare earth ores - Part 1: Determination of the proportions of fifteen rare earth element oxides
	GB/T 6730.85-2023 铁矿石化学分析用有证标准样品的制备和定值（中英文版） Iron ore - Preparation and determination of certified standard samples for chemical analysis
	GB/T 6609.35-2023 氧化铝化学分析方法和物理性能测定方法第35部分：比表面积的测定氮吸附法（中英文版） Methods for chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method
	GB/T 6150.15-2023 钨精矿化学分析方法第15部分：铋含量的测定氢化物发生原子荧光光谱法和火焰原子吸收光谱法（中英文版） Methods for chemical analysis of tungsten concentrates Part 15: Determination of bismuth content Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
	GB/T 6150.10-2023 钨精矿化学分析方法第10部分：铅含量的测定氢化物发生原子荧光光谱法和火焰原子吸收光谱法（中英文版） Methods for chemical analysis of tungsten concentrates Part 10: Determination of lead content Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
	GB/T 6150.4-2023 钨精矿化学分析方法第4部分：硫含量的测定高频感应红外吸收法和燃烧-碘量法（中英文版） Chemical analysis methods for tungsten concentrates Part 4: Determination of sulfur content High-frequency induction infrared absorption method and combustion-iodometric method
	GB/T 35306-2023 硅单晶中碳、氧含量的测定低温傅立叶变换红外光谱法（中英文版） Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy
	GB/T 42903-2023 金属材料蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法（中英文版） Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates
	GB/T 42923-2023 玻璃纤维增强塑料制品纤维长度的测定（中英文版） Glass fiber reinforced plastic products Determination of fiber length
	GB/T 17421.2-2023 机床检验通则第2部分：数控轴线的定位精度和重复定位精度的确定（中英文版） General Principles for Machine Tool Inspection Part 2: Determination of Positioning Accuracy and Repeatable Positioning Accuracy of CNC Axis
	GB/T 5758-2023 离子交换树脂粒度、有效粒径和均一系数的测定方法（中英文版） Method for determination of particle size, effective particle size and uniformity coefficient of ion exchange resin
	GB/T 9452-2023 热处理炉有效加热区测定方法（中英文版） Method for determination of effective heating zone of heat treatment furnace

找到:1198條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24