网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“The method of determ ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 12690.12-2024
稀土金属及其氧化物中非稀土杂质-化学分析方法-第12部分:钍、铀量的测定-电感耦合等离子体质谱法(中英文版)
Non-rare earth impurities in rare earth metals and their oxides - Chemical analysis methods - Part 12: Determination of thorium and uranium content - Inductively coupled plasma mass spectrometry
GB/T 43883-2024
微束分析-分析电子显微术-金属中纳米颗粒数密度的测定方法(中英文版)
Microbeam analysis - analytical electron microscopy - determination method of the number density of nanoparticles in metals
GB/T 22890.2-2024
皮革-柔软皮革防水性能的测定-第2部分:反复角压缩法(梅泽法)(中英文版)
Leather - Determination of water resistance of soft leather - Part 2: Repeated angular compression =Mezer method
GB/T 22890.1-2024
皮革-柔软皮革防水性能的测定-第1部分:反复线压缩法(透度计法)(中英文版)
Leather - Determination of water resistance of soft leather - Part 1: Repeated linear compression method (penetropyometer method)
GB/T 43818.1-2024
皮革-耐磨性能的测定-第1部分:泰伯尔法(中英文版)
Leather - Determination of abrasion resistance - Part 1: Taber method
GB/T 33285.2-2024
皮革和毛皮-烷基酚及烷基酚聚氧乙烯醚的测定-第2部分:间接法(中英文版)
Leather and fur - Determination of alkylphenols and alkylphenol polyoxyethylene ethers - Part 2: Indirect method
GB/T 43722.1-2024
皮革-抗菌性能的测定-第1部分:膜接触法(中英文版)
Leather-Determination of antibacterial properties-Part 1: Membrane contact method
GB/T 17630-2024
土工合成材料-动态穿孔试验-落锥法(中英文版)
Geosynthetics-Determination of effective pore size-Dry sieving method
GB/T 43607-2023
钯锭分析方法 银、铝、金、铋、铬、铜、铁、铱、镁、锰、镍、铅、铂、铑、钌、硅、锡、锌含量测定 火花放电原子发射光谱法(中英文版)
Palladium ingot analysis method Determination of silver, aluminum, gold, bismuth, chromium, copper, iron, iridium, magnesium, manganese, nickel, lead, platinum, rhodium, ruthenium, silicon, tin, zinc content Spark discharge atomic emission spectrometry
GB/T 33393-2023
鞋类 整鞋试验方法 热阻和湿阻的测定(中英文版)
Footwear - Test methods for complete shoes - Determination of thermal and moisture resistance
GB/T 23144-2023
纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理(中英文版)
Paper and paperboard Determination of bending stiffness General principles of the two-point, three-point and four-point methods
GB/T 43289-2023
塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法(中英文版)
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions.
GB/T 43282.1-2023
塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法(中英文版)
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide.
GB/T 18115.6-2023
稀土金属及其氧化物中稀土杂质化学分析方法 第6部分:铕中镧、铈、镨、钕、钐、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定(中英文版)
Methods for chemical analysis of rare earth impurities in rare earth metals and their oxides - Part 6: Determination of the amounts of lanthanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium in europium
GB/T 43016-2023
人造革合成革试验方法 表面褶皱的测定和评价(中英文版)
Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles
GB/T 42998-2023
家具产品及其材料中禁限用物质测定方法 醛酮类化合物(中英文版)
Method for determination of prohibited and restricted substances in furniture products and their materials Aldehydes and ketones
GB/T 3780.30-2023
炭黑 第30部分:高温挥发物的测定 热重法(中英文版)
Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method
GB/T 18950-2023
橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定(中英文版)
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties.
GB/T 18882.1-2023
离子型稀土矿混合稀土氧化物化学分析方法 第1部分:十五个稀土元素氧化物配分量的测定(中英文版)
Methods for chemical analysis of mixed rare earth oxides of ionic rare earth ores - Part 1: Determination of the proportions of fifteen rare earth element oxides
GB/T 6730.87-2023
铁矿石 全铁及其他多元素含量的测定 波长色散X射线荧光光谱法(钴内标法)(中英文版)
Iron ore, determination of total iron and other multi-element content, wavelength dispersive X-ray fluorescence spectrometry (cobalt internal standard method)
GB/T 42919.6-2023
塑料 导热系数和热扩散系数的测定 第6部分:基于温度调制技术的比较法(中英文版)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology
GB/T 42919.4-2023
塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法(中英文版)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
GB/T 42919.3-2023
塑料 导热系数和热扩散系数的测定 第3部分:温度波分析法(中英文版)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
GB/T 40261.1-2023
热环境的人类工效学 交通工具内热环境评价 第1部分:热应激评估原理与方法和等效温度测定(中英文版)
Ergonomics of the thermal environment Assessment of the thermal environment in vehicles Part 1: Principles and methods of heat stress assessment and equivalent temperature determination
GB/T 35210.1-2023
页岩甲烷等温吸附/解吸量的测定 第1部分:静态容积法(中英文版)
Determination of isothermal adsorption/desorption capacity of shale methane - Part 1: Static volumetric method
GB/T 10561-2023
钢中非金属夹杂物含量的测定 标准评级图显微检验法(中英文版)
Determination of the content of non-metallic inclusions in steel - standard grading chart microscopic examination method
GB/T 11060.2-2023
天然气 含硫化合物的测定 第2部分:用亚甲蓝法测定硫化氢含量(中英文版)
Natural gas - Determination of sulfur compounds - Part 2: Determination of hydrogen sulfide content by the methylene blue method
GB/T 42483-2023
木材导热系数的测定 热流法(中英文版)
Determination of thermal conductivity of wood - heat flow method
GB/T 28896-2023
金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版)
Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints
GB/T 19973.1-2023
医疗保健产品灭菌 微生物学方法 第1部分:产品上微生物总数的确定(中英文版)
Sterilization of healthcare products - Microbiological methods - Part 1: Determination of the total number of microorganisms on a product
GB/T 1927.11-2022
无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版)
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain
GB/T 1927.16-2022
无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定(中英文版)
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain
GB/T 13477.21-2022
建筑密封材料试验方法 第21部分:人工加速气候老化后颜色变化的测定(中英文版)
Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering
GB/T 1927.14-2022
无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定(中英文版)
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain
GB/T 18743.1-2022
热塑性塑料管材 简支梁冲击强度的测定 第1部分:通用试验方法(中英文版)
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods
GB/T 41424.1-2022
皮革 沾污性能的测定 第1部分:翻滚法(中英文版)
Leather - Determination of soiling properties - Part 1: Tumble method
GB/T 22459.2-2022
耐火泥浆 第2部分:稠度试验方法(跳桌法)(中英文版)
Refractory mortars—Part 2:Determination of consistency using the reciprocating flow table method
GB/T 22459.1-2022
耐火泥浆 第1部分:稠度试验方法(锥入度法)(中英文版)
Refractory mortars—Part 1:Determination of consistency using the penetrating cone method
GB/T 41329-2022
金属粉末流动性的测定 标准漏斗法(古斯塔弗森流速计)(中英文版)
Determination of the flowability of metal powders Standard funnel method (Gustafsson flowmeter)
GB/T 30310-2022
浸胶帘线、纱线和线绳附胶量测定的试验方法(中英文版)
Test method for determination of the amount of glue attached to dipped cords, yarns and cords
GB/T 6739-2022
色漆和清漆 铅笔法测定漆膜硬度(中英文版)
Paints and varnishes - Determination of film hardness by the pencil method
GB/T 12690.1-2022
稀土金属及其氧化物中非稀土杂质化学分析方法 第1部分:碳、硫量的测定 高频-红外吸收法(中英文版)
Chemical analysis methods for non-rare earth impurities in rare earth metals and their oxides—Part 1: Determination of carbon and sulfur content—High frequency-infrared absorption method
GB/T 42162-2022
生橡胶 毛细管气相色谱测定残留单体和其他挥发性低分子量化合物 热脱附(动态顶空)法(中英文版)
Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method
GB/T 39693.8-2022
硫化橡胶或热塑性橡胶 硬度的测定 第8部分:赵氏硬度(P&J)法测定胶辊的表观硬度(中英文版)
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method
GB/T 39693.7-2022
硫化橡胶或热塑性橡胶 硬度的测定 第7部分:邵氏硬度法测定胶辊的表观硬度(中英文版)
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method
GB/T 42122-2022
硫化橡胶或热塑性橡胶 耐磨性能的测定(改进型兰伯恩磨耗试验机法)(中英文版)
Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method)
GB/T 42275-2022
硬质合金 总碳量的测定 高频燃烧红外吸收法/热导法(中英文版)
Cemented carbide - Determination of total carbon content - High frequency combustion infrared absorption method/thermal conductivity method
GB/T 13477.23-2022
建筑密封材料试验方法 第23部分:人工加速气候老化下拉伸-压缩循环后耐久性的测定(中英文版)
Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering
GB/T 2406.3-2022
塑料 用氧指数法测定燃烧行为 第3部分:高温试验(中英文版)
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test
GB/T 22366-2022
感官分析 方法学 采用三点强迫选择法(3-AFC)测定嗅觉、味觉和风味觉察阈值的一般导则(中英文版)
Sensory analysis - Methodology - General guidelines for the determination of smell, taste and flavor perception thresholds using the three-point forced choice method (3-AFC)

找到:928條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved