“Test conditions for ” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 6553-2014 严酷环境条件下使用的电气绝缘材料 评定耐电痕化和蚀损的试验方法（中英文版） Electrical insulating materials used under severe ambient conditions―Test methods for evaluating resistance to tracking and erosion |
 |
|
|
|
GB/T 28046.5-2013 道路车辆 电气及电子设备的环境条件和试验 第5部分：化学负荷（中英文版） Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads |
|
|
|
|
GB/T 27797.1-2011 纤维增强塑料 试验板制备方法 第1部分：通则（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions |
|
|
|
|
GB/Z 27753-2011 质子交换膜燃料电池膜电极工况适应性测试方法（中英文版） Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells |
|
|
|
|
GB/T 20159.3-2011 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 有气候防护场所固定使用（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environmental tests - Stationary use at weatherprotected locations |
|
|
|
|
GB/T 28046.4-2011 道路车辆 电气及电子设备的环境条件和试验 第4部分：气候负荷（中英文版） Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads |
|
|
|
|
GB/T 28046.3-2011 道路车辆 电气及电子设备的环境条件和试验 第3部分：机械负荷（中英文版） Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads |
|
|
|
|
GB/T 28046.2-2011 道路车辆 电气及电子设备的环境条件和试验 第2部分：电气负荷（中英文版） Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
|
|
|
|
GB/T 28046.1-2011 道路车辆 电气及电子设备的环境条件和试验 第1部分：一般规定（中英文版） Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General |
|
|
|
|
GB/T 26949.10-2011 工业车辆 稳定性验证 第10部分：在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验（中英文版） Industrial trucks - Verification of stability - Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices |
|
|
|
|
GB/T 18268.25-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第25部分：特殊要求 接口符合IEC61784-1, CP3/2的现场装置的试验配置、工作条件和性能判据（中英文版） Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 25: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/ |
|
|
|
|
GB/T 18268.24-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第24部分：特殊要求 符合IEC 61557-8的绝缘监控装置和符合IEC 61557-9的绝缘故障定位设备的试验配置、工作条件和性能判据（中英文版） Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 24: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and fo |
|
|
|
|
GB/T 18268.23-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第23部分：特殊要求 带集成或远程信号调理变送器的试验配置、工作条件和性能判据（中英文版） Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 23: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
|
|
|
|
GB/T 18268.22-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第22部分：特殊要求 低压配电系统用便携式试验、测量和监控设备的试验配置、工作条件和性能判据（中英文版） Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 22: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low |
|
|
|
|
GB/T 18268.21-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第21部分：特殊要求 无电磁兼容防护场合用敏感性试验和测量设备的试验配置、工作条件和性能判据（中英文版） Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 21: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected |
|
|
|
|
GB/T 25962-2010 高速条件下汽车轮毂轴承润滑脂漏失量测定法（中英文版） Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions |
|
|
|
|
GB/Z 6113.405-2010 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分：不确定度、统计学和限值建模替换试验方法的使用条件（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
|
|
|
|
GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法（中英文版） Basic environmental conditions and testing methods for transportation and storage of instruments |
|
|
|
|
GB/T 8190.9-2010 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程（中英文版） Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
|
|
|
|
GB/T 8190.10-2010 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程（中英文版） Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
|
|
|
|
GB/T 18400.7-2010 加工中心检验条件 第7部分：精加工试件精度检验（中英文版） Test conditions for machining centres - Part 7: Accuracy of a finished test piece |
|
|
|
|
GB/T 18400.5-2010 加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验（中英文版） Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets |
|
|
|
|
GB/T 18400.4-2010 加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验（中英文版） Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes |
|
|
|
|
GB/T 18400.2-2010 加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴)（中英文版） Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) |
|
|
|
|
GB/T 18400.1-2010 加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴)（中英文版） Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z -axis) |
|
|
|
|
GB/T 24105-2009 岩土工程仪器基本环境试验条件及方法（中英文版） Basic conditions and methods of environmental test for geotechnical engineering instrument |
|
|
|
|
GB/T 23582.1-2009 立式车床检验条件 精度检验 第1部分：单柱和双柱立式车床（中英文版） Test conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: Single and double column vertical turning and boring lathes |
|
|
|
|
GB/T 23569-2009 重型卧式车床检验条件 精度检验（中英文版） Test conditions for heavy duty horizontal lathe - Testing of the accuracy |
|
|
|
|
GB/T 16462.8-2009 数控车床和车削中心检验条件 第8部分：热变形的评定（中英文版） Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions |
|
|
|
|
GB/T 16462.7-2009 数控车床和车削中心检验条件 第7部分：在坐标平面内轮廓特性的评定（中英文版） Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes |
|
|
|
|
GB/T 23291-2009 机床 整体爪手动自定心卡盘检验条件（中英文版） Machine tools - Test conditions for self-centring，manually-operated chucks with one-piece jaws |
|
|
|
|
GB/T 19216.31-2008 在火焰条件下电缆或光缆的线路完整性试验 第31部分：供火并施加冲击的试验程序和要求 额定电压0.6/1kV及以下电缆（中英文版） Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0.6/1 kV |
|
|
|
|
GB/T 19216.12-2008 在火焰条件下电缆或光缆的线路完整性试验 第12部分：试验装置 火焰温度不低于830℃的供火并施加冲击（中英文版） Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830℃ |
|
|
|
|
GB/T 20159.8-2008 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 导言（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environmental tests - Introduction |
|
|
|
|
GB/T 20159.7-2008 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 携带和非固定使用（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Portable and non-stationary use |
|
|
|
|
GB/T 20159.6-2008 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 船用（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Ship environment |
|
|
|
|
GB/T 20159.5-2008 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 地面车辆使用（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Ground vehicle installations |
|
|
|
|
GB/T 20159.2-2008 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 运输（中英文版） Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Transportation |
|
|
|
|
GB/T 14625.4-2008 篮球、足球、排球、手球试验方法 第4部分：试验条件与试样准备（中英文版） Test methods for basketball, football, volleyball and handball - Part 4: Test conditions and sample preparation |
|
|
|
|
GB/T 5289.1-2008 卧式铣镗床精度检验条件 第1部分：固定立柱和移动式工作台机床（中英文版） Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table |
|
|
|
|
GB/T 1040.5-2008 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件（中英文版） Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
|
|
|
|
GB/T 18380.36-2008 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D |
|
|
|
|
GB/T 18380.35-2008 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C |
|
|
|
|
GB/T 18380.34-2008 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B |
|
|
|
|
GB/T 18380.33-2008 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A |
|
|
|
|
GB/T 18380.32-2008 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
|
|
|
|
GB/T 18380.31-2008 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置（中英文版） Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
|
|
|
|
GB/T 18380.22-2008 电缆和光缆在火焰条件下的燃烧试验 第22部分：单根绝缘细电线电缆火焰垂直蔓延试验 扩散型火焰试验方法（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 22:Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
|
|
|
|
GB/T 18380.21-2008 电缆和光缆在火焰条件下的燃烧试验 第21部分：单根绝缘细电线电缆火焰垂直蔓延试验 试验装置（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 21:Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
|
|
|
|
GB/T 18380.13-2008 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落(物)/微粒的试验方法（中英文版） Tests on electric and optical fibre cables under fire conditions - Part 13:Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
|
| 找到:144條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
+86-755-2583-1330
