“Determination of pla ” 中國GB標準檢索結果 |
![]() |
1. 已翻譯的GB標準英文版(有 SALE
標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。 2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。 |
![]() |
GB/T 42175-2022 海洋石油勘探开发钻井泥浆和钻屑中铜、铅、锌、镉、铬的测定 微波消解-电感耦合等离子体质谱法(中英文版) Determination of copper, lead, zinc, cadmium and chromium in drilling mud and drilling cuttings for offshore oil exploration and development Microwave digestion-inductively coupled plasma mass spectrometry |
![]() |
|
![]() |
GB/T 42248-2022 土壤、水系沉积物 碘、溴含量的测定 半熔-电感耦合等离子体质谱法(中英文版) Determination of iodine and bromine content in soil and water system sediment semi-melting-inductively coupled plasma mass spectrometry |
![]() |
|
![]() |
GB/T 41926-2022 塑料 环氧树脂 1,2-乙二醇含量的测定(中英文版) Plastics - Determination of 1,2-ethylene glycol content in epoxy resins |
![]() |
|
![]() |
GB/T 41928-2022 塑料 环氧树脂 差示扫描量热法(DSC)测定交联环氧树脂交联度(中英文版) Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) |
![]() |
|
![]() |
GB/T 41932-2022 塑料 断裂韧性(GIC和KIC)的测定 线弹性断裂力学(LEFM)法(中英文版) Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method |
![]() |
|
![]() |
GB/T 41933-2022 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法(中英文版) Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method |
![]() |
|
![]() |
GB/T 41934-2022 塑料 薄膜和薄片垂直火焰蔓延的测定(中英文版) Plastics - Determination of vertical flame spread of films and sheets |
![]() |
|
![]() |
GB/T 2406.3-2022 塑料 用氧指数法测定燃烧行为 第3部分:高温试验(中英文版) Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test |
![]() |
|
![]() |
GB/T 11546.2-2022 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变(中英文版) Plastics - Determination of creep properties - Part 2: Three-point bending creep |
![]() |
|
![]() |
GB/T 19466.5-2022 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间,反应焓和转化率的测定(中英文版) Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion |
![]() |
|
![]() |
GB/T 41936.2-2022 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物(中英文版) Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers |
![]() |
|
![]() |
GB/T 41936.1-2022 塑料 柔性材料扭转刚度的测定 第1部分:通用方法(中英文版) Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method |
![]() |
|
![]() |
GB/T 33061.11-2022 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度(中英文版) Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature |
![]() |
|
![]() |
GB/T 41937-2022 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性(中英文版) Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method |
![]() |
|
![]() |
GB/T 41792-2022 塑料制品 薄膜和薄片 冷裂温度的测定(中英文版) Plastics - Films and sheets - Determination of cold cracking temperature |
![]() |
|
![]() |
GB/T 41682-2022 食品塑料包装容器中顶空气体含量的测定 传感器法(中英文版) Determination of headspace gas content in food plastic packaging containers - sensor method |
![]() |
|
![]() |
GB/T 41769-2022 碲锌镉化学分析方法 锌和镉含量的测定 电感耦合等离子体原子发射光谱法(中英文版) CdZnTe chemical analysis method - Determination of zinc and cadmium content - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 1871.5-2022 磷矿石和磷精矿中氧化镁含量的测定 火焰原子吸收光谱法、容量法和电感耦合等离子体发射光谱法(中英文版) Determination of magnesium oxide content in phosphate rocks and concentrates - Flame atomic absorption spectrometry, volumetric and inductively coupled plasma emission spectrometry |
![]() |
|
![]() |
GB/T 13747.18-2022 锆及锆合金化学分析方法 第18部分:钒含量的测定 苯甲酰苯基羟胺分光光度法和电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of zirconium and zirconium alloys - Part 18: Determination of vanadium content - Benzoylphenyl hydroxylamine spectrophotometry and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 13747.10-2022 锆及锆合金化学分析方法 第10部分:钨含量的测定 硫氰酸盐分光光度法和电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of zirconium and zirconium alloys - Part 10: Determination of tungsten content - Thiocyanate spectrophotometry and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 13747.9-2022 锆及锆合金化学分析方法 第9部分:镁含量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of zirconium and zirconium alloys - Part 9: Determination of magnesium content - flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 6150.2-2022 钨精矿化学分析方法 第2部分:锡含量的测定 碘酸钾滴定法和电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of tungsten concentrates - Part 2: Determination of tin content - Potassium iodate titration and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 41709-2022 碳纤维增强塑料 粉碎料尺寸和长宽比的测定(中英文版) Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material |
![]() |
|
![]() |
GB/T 41878-2022 塑料 划痕性能的测定(中英文版) Plastics - Determination of scratch properties |
![]() |
|
![]() |
GB/T 41762.2-2022 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分:弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应(中英文版) Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests |
![]() |
|
![]() |
GB/T 41880-2022 塑料 环氧树脂 水萃取液电导率的测定(中英文版) Plastics - epoxy resins - determination of electrical conductivity of aqueous extracts |
![]() |
|
![]() |
GB/T 3517-2022 天然生胶 塑性保持率(PRI)的测定(中英文版) Natural raw rubber - Determination of plasticity retention (PRI) |
![]() |
|
![]() |
GB/T 41758.2-2022 塑料 聚酮(PK)模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
![]() |
|
![]() |
GB/T 40611-2021 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法(中英文版) Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer |
![]() |
|
![]() |
GB/T 40460-2021 肥料中植物生长调节剂的测定 气相色谱法(中英文版) Determination of plant growth regulators in fertilizers—Gas chromatography |
![]() |
|
![]() |
GB/T 40384-2021 塑料 聚合物熔体瞬态拉伸黏度的测定(中英文版) Plastics—Determination of the transient extensional viscosity of polymer melts |
![]() |
|
![]() |
GB/T 40426.3-2021 塑料制品 装饰性实体面材 第3部分:性能的测定 非板型实体面材(中英文版) Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material |
![]() |
|
![]() |
GB/T 40426.2-2021 塑料制品 装饰性实体面材 第2部分:性能的测定 板型实体面材(中英文版) Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material |
![]() |
|
![]() |
GB/T 40401-2021 骨架密度的测量 气体体积置换法(中英文版) Determination of density by volumetric displacement—Skeleton density by gas pycnometry |
![]() |
|
![]() |
GB/T 40368-2021 植物代谢产物胰蛋白酶抑制因子测定 酶联免疫吸附法(中英文版) Determination of kunitz trypsin inhibitor of plant metabolites—Enzyme-linked immunosorbent assay |
![]() |
|
![]() |
GB/T 40367-2021 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法(中英文版) Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide |
![]() |
|
![]() |
GB/T 40348-2021 植物源产品中辣椒素类物质的测定 液相色谱-质谱/质谱法(中英文版) Determination of capsaicinoid in plant derived products—Liquid chromatography-tandem mass spectrometry |
![]() |
|
![]() |
GB/T 40302-2021 塑料 立式软薄试样与小火焰源接触的燃烧性能测定(中英文版) Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
![]() |
|
![]() |
GB/T 40280-2021 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度(中英文版) Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method |
![]() |
|
![]() |
GB/T 39715.4-2021 塑料 生物基含量 第4部分:生物基物质含量的测定(中英文版) Plastics—Biobased content—Part 4: Determination of biobased mass content |
![]() |
|
![]() |
GB/T 39715.3-2021 塑料 生物基含量 第3部分:生物基合成聚合物含量的测定(中英文版) Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content |
![]() |
|
![]() |
GB/T 39715.2-2021 塑料 生物基含量 第2部分:生物基碳含量的测定(中英文版) Plastics—Biobased content—Part 2: Determination of biobased carbon content |
![]() |
|
![]() |
GB/T 33047.3-2021 塑料 聚合物热重法(TG) 第3部分:使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学(中英文版) Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics |
![]() |
|
![]() |
GB/T 33047.2-2021 塑料 聚合物热重法(TG) 第2部分:活化能的测定(中英文版) Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy |
![]() |
|
![]() |
GB/T 15596-2021 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定(中英文版) Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
![]() |
|
![]() |
GB/T 2408-2021 塑料 燃烧性能的测定 水平法和垂直法(中英文版) Plastics—Determination of burning characteristics—Horizontal and vertical test |
![]() |
|
![]() |
GB/T 1845.2-2021 塑料 聚乙烯(PE)模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties |
![]() |
|
![]() |
GB/T 223.90-2021 钢铁及合金 硅含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 40374-2021 硬质合金化学分析方法 铅量和镉量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法(中英文版) Hardmetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 40612-2021 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法(中英文版) Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide |
![]() |
找到:977條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 |