网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“Test method for in-p ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 28769-2012
脂肪酸甲酯中游离甘油含量的测定 气相色谱法(中英文版)
Test method for determination of free glycerol content in Fatty Acid Methyl Esters(FAME) by gas chromatography
GB/T 28872-2012
活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法(中英文版)
Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living cells
GB/T 28861-2012
环氧粉末包封料熔融流动性试验方法(中英文版)
Test method for measuring melt fluidity of encapsulating material of powdered epoxy
GB/T 28860-2012
环氧粉末包封料胶化时间测定方法(中英文版)
Test method for the determination of get time of encapsulating material of powdered epoxy
GB/T 28817-2012
聚合物电解质燃料电池单电池测试方法(中英文版)
Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 2820.11-2012
往复式内燃机驱动的交流发电机组 第11部分:旋转不间断电源 性能要求和试验方法(中英文版)
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
GB/T 2423.50-2012
环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验(中英文版)
Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components
GB/T 17626.24-2012
电磁兼容 试验和测量技术 HEMP传导骚扰保护装置的试验方法(中英文版)
Electromagnetic compatibility - Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance
GB/T 28752-2012
火焰在垂直表面的横向蔓延试验方法(中英文版)
Test method for lateral spread of flame on building and transport products in vertical configuration
GB/T 28706-2012
无损检测 机械及电气设备红外热成像检测方法(中英文版)
Non-destructive testing - Test method for mechanical and electrical equipment with infrared thermography
GB/T 28705-2012
无损检测 脉冲涡流检测方法(中英文版)
Non-destructive testing - Test method for pulsed eddy current testing
GB/T 521-2012
轮胎外缘尺寸测量方法(中英文版)
Test method of measuring peripheral dimensions for tyres
GB/T 28638-2012
城镇供热管道保温结构散热损失测试与保温效果评定方法(中英文版)
Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes
GB/T 28647-2012
化学品 啮齿类动物子宫增重试验 雌激素作用的短期筛选试验(中英文版)
Chemicals - Test method of uterotrophic bioassay in rodents - A short-term screening test for oestrogenic properties
GB/T 9292-2012
表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法(中英文版)
Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition
GB/T 28519-2012
通信产品能耗测试方法通则(中英文版)
General principles of energy consumption test methods for telecommunication equipment
GB/T 28297-2012
厚钢板超声自动检测方法(中英文版)
Thicker steel plates - Method for automatic ultrasonic testing
GB/T 28289-2012
铝合金隔热型材复合性能试验方法(中英文版)
Test methods for composite performances of aluminium alloy thermal barrier profiles
GB/T 25749.7-2012
机械安全 空气传播的有害物质排放的评估 第7部分:测量污染物浓度参数的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
GB/T 25749.6-2012
机械安全 空气传播的有害物质排放的评估 第6部分:测量带导管出口的空气净化系统质量分离效率的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
GB/T 25749.5-2012
机械安全 空气传播的有害物质排放的评估 第5部分:测量不带导管出口的空气净化系统质量分离效率的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
GB/T 8243.9-2012
内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
GB/T 20485.31-2011
振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试(中英文版)
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity
GB/T 18570.6-2011
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版)
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method
GB/T 27825-2011
化学品 皮肤吸收 体内试验方法(中英文版)
Chemicals - Test method for skin absorption - In vivo
GB/T 27818-2011
化学品 皮肤吸收 体外试验方法(中英文版)
Chemicals - Testing method for skin absorption-in vitro
GB/T 27797.9-2011
纤维增强塑料 试验板制备方法 第9部分:GMT/STC模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC
GB/T 27797.8-2011
纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC
GB/T 27797.7-2011
纤维增强塑料 试验板制备方法 第7部分:树脂传递模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding
GB/T 27797.6-2011
纤维增强塑料 试验板制备方法 第6部分:拉挤模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding
GB/T 27797.5-2011
纤维增强塑料 试验板制备方法 第5部分:缠绕成型(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding
GB/T 27797.3-2011
纤维增强塑料 试验板制备方法 第3部分:湿法模塑(中英文版)
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding
GB/T 27797.2-2011
纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding
GB/T 27797.1-2011
纤维增强塑料 试验板制备方法 第1部分:通则(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions
GB/T 27797.11-2011
纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates
GB/T 27797.10-2011
纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
GB/T 27862-2011
化学品危险性分类试验方法 气体和气体混合物燃烧潜力和氧化能力(中英文版)
Testing method for classification of chemical hazards - Fire potential and oxidizing ability of gases and gas mixtures
GB/T 27934.4-2011
纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜(中英文版)
Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive
GB/T 27934.3-2011
纸质印刷品覆膜过程控制及检测方法 第3部分:水基胶黏剂即涂干式覆膜(中英文版)
Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive
GB/T 27934.2-2011
纸质印刷品覆膜过程控制及检测方法 第2部分:乙烯-醋酸乙烯共聚物(EVA)热熔胶预涂覆膜(中英文版)
Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive
GB/T 27896-2011
天然气中水含量的测定 电子分析法(中英文版)
Test method for water vapor content of natural gas using electronic moisture analyzers
GB/T 27698.8-2011
热交换器及传热元件性能测试方法 第8部分:热交换器工业标定(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 8: Determination of industrial locale for heat exchangers
GB/T 27698.6-2011
热交换器及传热元件性能测试方法 第6部分:空冷器用翅片管(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 6: Fing tube for air-cooled heat exchangers
GB/T 17178.7-2011
信息技术 开放系统互连 一致性测试方法和框架 第7部分:实现一致性声明(中英文版)
Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statements
GB/T 17178.5-2011
信息技术 开放系统互连 一致性测试方法和框架 第5部分: 一致性评估过程对测试实验室及客户的要求(中英文版)
Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 5: Requirement on test laboratories and clients for the conformance assessment process
GB 27934.1-2011
纸质印刷品覆膜过程控制及检测方法 第1部分:基本要求(中英文版)
Lamination process control and testing methods for paper prints - Part 1: General requirements
GB/Z 27753-2011
质子交换膜燃料电池膜电极工况适应性测试方法(中英文版)
Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
GB/T 9384-2011
广播收音机、广播电视接收机、磁带录音机、声频功率放大器(扩音机)的环境试验要求和试验方法(中英文版)
Environmental testing requirements and methods for broadcasting receivers,broadcasting television receivers,tape recorders and audio amplifiers
GB/T 27760-2011
利用Si(111)晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法(中英文版)
Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps
GB/T 27749-2011
绝缘漆耐热性试验规程 电气强度法(中英文版)
Test procedure for thermal endurance of insulating varnishes - Electric strength method

找到:2338條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [20] [21] [22] [23] [24] [25] [26]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved