“Measurement of the r ” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 25964-2010 石油和液体石油产品 采用混合式油罐测量系统测量立式圆筒形油罐内油品体积、密度和质量的方法（中英文版） Petroleum and liquid petroleum products - Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems |
 |
|
|
|
GB/T 25758.5-2010 无损检测 工业X射线系统焦点特性 第5部分：小焦点和微焦点X射线管的有效焦点尺寸的测量方法（中英文版） Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes |
|
|
|
|
GB/T 25753.2-2010 真空技术 罗茨真空泵性能测量方法 第2部分：零流量压缩比的测量（中英文版） Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput |
|
|
|
|
GB/T 25749.4-2010 机械安全 空气传播的有害物质排放的评估 第4部分：测量排气系统捕获效率的示踪法（中英文版） Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system |
|
|
|
|
GB/T 25749.3-2010 机械安全 空气传播的有害物质排放的评估 第3部分：测量给定污染物排放率的试验台法（中英文版） Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
|
|
|
|
GB/T 25749.2-2010 机械安全 空气传播的有害物质排放的评估 第2部分：测量给定污染物排放率的示踪气体法（中英文版） Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
|
|
|
|
GB/T 18655-2010 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法（中英文版） Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
|
|
|
|
GB/T 20441.3-2010 电声学 测量传声器 第3部分：采用互易技术对实验室标准传声器的自由场校准的原级方法（中英文版） Electroacoustics - Measurement microphone - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
|
|
|
|
GB/T 25256-2010 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法（中英文版） Optical functional films - Release film - The measurement of peeling force at 180°angle and subsequent adhesion |
|
|
|
|
GB/T 25134-2010 锻压制件及其模具三维几何量光学检测规范（中英文版） Optical measurement specification of 3D geometry for forgings/stampings and the dies |
|
|
|
|
GB/T 13930-2010 水环真空泵和水环压缩机 气量测定方法（中英文版） Methods for the measurement of volume flow of gas of water-ring vacuum pumps and compressors |
|
|
|
|
GB/T 19889.14-2010 声学 建筑和建筑构件隔声测量 第14部分：特殊现场测量导则（中英文版） Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field |
|
|
|
|
GB/Z 22553-2010 利用重复性、再现性和正确度的估计值评估测量不确定度的指南（中英文版） Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
|
|
|
|
GB/T 24959-2010 冷冻轻烃流体 液化气储罐内温度的测量 电阻温度计和热电偶（中英文版） Refrigerated light hydrocarbon fluids - Measurement of temperature in tanks containing liquefied gases - Resistance thermometers and thermocouples |
|
|
|
|
GB/T 24794-2009 照相化学品 有机物中微量元素的分析 电感耦合等离子体原子发射光谱(ICP-AES)法（中英文版） Photographic chemicals - Measurement methods of the trace elements in the organic compounds - Inductively coupled plasma atomic emission spectrometry (ICP-AES) |
|
|
|
|
GB/T 24635.3-2009 产品几何技术规范（GPS) 坐标测量机（CMM） 确定测量不确定度的技术 第3部分：应用已校准工件或标准件（中英文版） Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards |
|
|
|
|
GB/T 24622-2009 绝缘子表面湿润性测量导则（中英文版） Guidance on the measurement of wettability of insulator surfaces |
|
|
|
|
GB 20936.2-2009 可燃性气体探测用电气设备 第2部分：显示空气中甲烷体积含量至5%的I类探测器的性能要求（中英文版） Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air |
|
|
|
|
GB/T 13888-2009 在开磁路中测量磁性材料矫顽力的方法（中英文版） Method of measurement of the coercivity of magnetic materials in an open magnetic circuit |
|
|
|
|
GB/T 24185-2009 逐级加力法测定钢中氢脆临界值试验方法（中英文版） Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method |
|
|
|
|
GB/T 23770-2009 液体无机化工产品色度测定通用方法（中英文版） Liquid inorganic chemical products - General method for the measurement of colour |
|
|
|
|
GB/T 14124-2009 机械振动与冲击 建筑物的振动 振动测量及其对建筑物影响的评价指南（中英文版） Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings |
|
|
|
|
GB/T 20936.3-2009 可燃性气体探测用电气设备 第3部分：显示空气中甲烷体积含量至100%的I类探测器的性能要求（中英文版） Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air |
|
|
|
|
GB/T 23459-2009 陶瓷工业窑炉热平衡、热效率测定与计算方法（中英文版） Measurement and calculation method of heat balance and thermal efficiency for ceramic industrial kiln |
|
|
|
|
GB 16486-2008 轻便摩托车燃油消耗量限值及测量方法（中英文版） The limits and measurement methods of fuel consumption for mopeds |
|
|
|
|
GB 15744-2008 摩托车燃油消耗量限值及测量方法（中英文版） The limits and measurement methods of fuel consumption for motorcycles |
|
|
|
|
GB 20936.4-2008 可燃性气体探测用电气设备 第4部分：显示气体体积含量至100%的II类探测器的性能要求（中英文版） Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas |
|
|
|
|
GB/T 22665.6-2008 手持式电动工具手柄的振动测量方法 第6部分：锤类工具（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 6: Hammers |
|
|
|
|
GB/T 22665.5-2008 手持式电动工具手柄的振动测量方法 第5部分：圆锯（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 5: Circular saws |
|
|
|
|
GB/T 22665.4-2008 手持式电动工具手柄的振动测量方法 第4部分：非盘式砂光机和抛光机（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 4: Sanders and polishers other than disk type |
|
|
|
|
GB/T 22665.3-2008 手持式电动工具手柄的振动测量方法 第3部分：砂轮机、抛光机和盘式砂光机（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 3: Grinders, polishers and disk-type sanders |
|
|
|
|
GB/T 22665.2-2008 手持式电动工具手柄的振动测量方法 第2部分：螺丝刀和冲击扳手（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 2: Screwdrivers and impact wrenches |
|
|
|
|
GB/T 22665.1-2008 手持式电动工具手柄的振动测量方法 第1部分：电钻和冲击钻（中英文版） Measurement of vibrations at the handle of hand-held electric tools - Part 1: Drills and impact drills |
|
|
|
|
GB/T 14625.2-2008 篮球、足球、排球、手球试验方法 第2部分：反弹高度测定方法（中英文版） Test methods for basketball, football, volleyball and handball - Part 2: The measurement of bouncing altitude |
|
|
|
|
GB/T 14625.1-2008 篮球、足球、排球、手球试验方法 第1部分：圆度测定方法（中英文版） Test methods for basketball, football, volleyball and handball - Part 1: The measurement of roundness |
|
|
|
|
GB/T 10283-2008 林业机械 便携式风力灭火机 手把振动的测定（中英文版） Forestry machinery - Portable pneumatic fire extinguisher - Measurement of vibration at the handles |
|
|
|
|
GB/T 3655-2008 用爱泼斯坦方圈测量电工钢片（带）磁性能的方法（中英文版） Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an epstein frame |
|
|
|
|
GB/T 13789-2008 用单片测试仪测量电工钢片(带)磁性能的方法（中英文版） Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester |
|
|
|
|
GB 4793.6-2008 测量、控制和实验室用电气设备的安全要求 第6部分：实验室用材料加热设备的特殊要求（中英文版） Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials |
|
|
|
|
GB/T 6375-2008 土方机械 牵引力测试方法（中英文版） Earth-moving machinery - Method of test for the measurement of drawbar pull |
|
|
|
|
GB/T 22279-2008 煤炭成分分析和物理特性测量标准物质研制导则（中英文版） Guide for development of certified reference materials for the composition analysis and the physical property measurements of coal |
|
|
|
|
GB/T 22184-2008 谷物和豆类 散存粮食温度测定指南（中英文版） Cereals and pulses - Guidance on measurement of the temperature of grain stored in bulk |
|
|
|
|
GB/T 8910.5-2008 手持便携式动力工具 手柄振动测量方法 第5部分: 建筑工程用路面破碎机和镐（中英文版） Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work |
|
|
|
|
GB/T 8910.4-2008 手持便携式动力工具 手柄振动测量方法 第4部分: 砂轮机（中英文版） Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders |
|
|
|
|
GB/T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分：弹性支撑件平动动刚度的间接测量方法（中英文版） Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|
|
|
|
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分：聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分（中英文版） Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|
|
|
|
GB/T 2951.13-2008 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验（中英文版） Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test |
|
|
|
|
GB/T 2951.11-2008 电缆和光缆绝缘和护套材料通用试验方法 第11部分：通用试验方法 厚度和外形尺寸测量 机械性能试验（中英文版） Common test methods for insulating and sheathing materials of electric and optical cables - Part 11：Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
|
|
|
|
GB 10069.3-2008 旋转电机噪声测定方法及限值 第3部分: 噪声限值（中英文版） Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 3:Noise limits |
|
|
|
|
GB/T 17357-2008 设备及管道绝热层表面热损失现场测定 热流计法和表面温度法（中英文版） In-situ measurements of heat loss through thermal insulation of equipments and pipes - Heat flow meter apparatus and surface temperature method |
|
| 找到:324條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |
+86-755-2583-1330
