“Plastics and plastic ” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 34691.2-2017 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定（中英文版） Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties |
 |
|
|
|
GB/T 5565.2-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验（中英文版） Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures |
|
|
|
|
GB/T 9574-2017 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率（中英文版） Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure |
|
|
|
|
GB/T 5565.3-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验（中英文版） Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures |
|
|
|
|
GB/T 5565.1-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验（中英文版） Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures |
|
|
|
|
GB/T 12784-2017 橡胶塑料加压式捏炼机（中英文版） Pressurized kneader for rubber and plastics |
|
|
|
|
GB/T 12000-2017 塑料 暴露于湿热、水喷雾和盐雾中影响的测定（中英文版） Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist |
|
|
|
|
GB/T 17603-2017 光解性塑料户外暴露试验方法（中英文版） Standard practice for outdoor exposure testing of photodegradable plastics |
|
|
|
|
GB/T 34903.1-2017 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料（中英文版） Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:Thermoplastics |
|
|
|
|
GB/T 35513.1-2017 塑料 聚碳酸酯(PC)模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications |
|
|
|
|
GB 16487.12-2017 进口可用作原料的固体废物环境保护控制标准—废塑料（中英文版） Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of plastics |
|
|
|
|
GB/T 35513.2-2017 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试（中英文版） Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties |
|
|
|
|
GB/T 33580-2017 橡胶塑料挤出机能耗检测方法（中英文版） Testing and measuring methods of energy consumption for rubber and plastics extruder |
|
|
|
|
GB/T 3960-2016 塑料 滑动摩擦磨损试验方法（中英文版） Plastics—Test method for friction and wear by sliding |
|
|
|
|
GB/T 33317-2016 塑料 酚醛树脂 六次甲基四胺含量的测定 凯氏定氮法、高氯酸法和盐酸法（中英文版） Plastics—Phenolic resins—Determination of hexamethylenetetramine content—Kjeldahl method,perchloric acid method and hydrochloric acid method |
|
|
|
|
GB 31604.27-2016 食品安全国家标准 食品接触材料及制品 塑料中环氧乙烷和环氧丙烷的测定（中英文版） National Food Safety Standard-Food contact materials and products-Plastics - Determination of ethylene oxide and propylene oxide |
|
|
|
|
GB/T 1845.1-2016 塑料 聚乙烯（PE）模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics—Polyethylene(PE) moulding and extrusion materials—Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 30924.1-2016 塑料 乙烯-乙酸乙烯酯（EVAC）模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics—Ethylene-vinyl acetate(EVAC) moulding and extrusion materials—Part 1: Designation system and basis for specification |
|
|
|
|
GB/T 5474-2016 塑料 酚醛模塑制品 游离氨和铵化合物的测定 比色法（中英文版） Plastics—Phenol formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method |
|
|
|
|
GB/T 32681-2016 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度（中英文版） Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry |
|
|
|
|
GB/T 22271.3-2016 塑料 聚甲醛（POM）模塑和挤塑材料 第3部分：通用产品要求（中英文版） Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 3: Requirements for general materials |
|
|
|
|
GB 51160-2016 纤维增强塑料设备和管道工程技术规范（中英文版） Technical code for fibre reinforced plastics equipment and piping engineering |
|
|
|
|
GB/T 32378-2015 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定（中英文版） Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions |
|
|
|
|
GB/T 32456-2015 橡胶塑料机械用电磁加热节能系统通用技术条件（中英文版） General specifications for electromagnetic of induction heating energy-saving systems used for rubber and plastics machines |
|
|
|
|
GB/T 32434-2015 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序（中英文版） Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems |
|
|
|
|
GB/T 32363.2-2015 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定（中英文版） Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties |
|
|
|
|
GB/T 32363.1-2015 塑料 聚酰胺模塑和挤出材料 第1部分：命名系统和规范基础（中英文版） Plastics—Polyamide (PA) moulding and extrusion materials—Part 1: Designation system and basis for specification |
|
|
|
|
GB/T 14232.2-2015 人体血液及血液成分袋式塑料容器 第2部分：用于标签和使用说明书的图形符号（中英文版） Plastics collapsible containers for human blood and blood components—Part 2: Blood bag systems with integrated features |
|
|
|
|
GB/T 29165.4-2015 石油天然气工业 玻璃纤维增强塑料管 第4部分：装配、安装与运行（中英文版） Petroleum and natural gas industries—Glass-reinforced plastics(GRP) piping—Part 4: Fabrication, installation and operation |
|
|
|
|
GB/T 29165.3-2015 石油天然气工业 玻璃纤维增强塑料管 第3部分：系统设计（中英文版） Petroleum and natural gas industries—Glass-reinforced plastics (GRP) piping—Part 3: System design |
|
|
|
|
GB/T 31331-2014 改性塑料的环保要求和标识（中英文版） Requirement and identification for environmental protection of modified plastics |
|
|
|
|
GB/T 30768-2014 食品包装用纸与塑料复合膜、袋（中英文版） Paper and plastics laminated films and pouches for food packaging |
|
|
|
|
GB/T 30924.2-2014 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定（中英文版） Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties |
|
|
|
|
GB/T 30200-2013 橡胶塑料注射成型机能耗检测方法（中英文版） Test method for energy consumption of rubber and plastics injection moulding machines |
|
|
|
|
GB/T 9572-2013 橡胶和塑料软管及软管组合件 电阻和导电性的测定（中英文版） Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity |
|
|
|
|
GB/T 5568-2013 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验（中英文版） Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing |
|
|
|
|
GB/T 5567-2013 橡胶和塑料软管及软管组合件 耐真空性能的测定（中英文版） Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum |
|
|
|
|
GB/T 5563-2013 橡胶和塑料软管及软管组合件 静液压试验方法（中英文版） Rubber and plastics hoses and hose assemblies—Hydrostatic testing |
|
|
|
|
GB/T 18422-2013 橡胶和塑料软管及软管组合件 透气性的测定（中英文版） Rubber and plastics hoses and hose assemblies—Determination of permeability to gas |
|
|
|
|
GB/T 30102-2013 塑料 塑料废弃物的回收和再循环指南（中英文版） Plastics―Guidelines for the recovery and recycling of plastics waste |
|
|
|
|
GB 29993-2013 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法（中英文版） Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods |
|
|
|
|
GB/T 3403.3-2013 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第3部分: 选定模塑料的要求（中英文版） Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 3: Requirements for selected moulding compounds |
|
|
|
|
GB/T 3403.2-2013 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定（中英文版） Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties |
|
|
|
|
GB/T 29874-2013 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定（中英文版） Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder |
|
|
|
|
GB/T 13454.2-2013 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定（中英文版） Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties |
|
|
|
|
GB/T 13454.1-2013 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第1部分：命名系统和分类基础（中英文版） Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs) - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 9576-2013 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南（中英文版） Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance |
|
|
|
|
GB/T 9575-2013 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差（中英文版） Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
|
|
|
|
GB/T 9573-2013 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法（中英文版） Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
|
|
|
|
GB/T 18423-2013 橡胶和塑料软管及非增强软管 液体壁透性测定（中英文版） Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
|
| 找到:385條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 |
+86-755-2583-1330
