“The ” 中國GB標準檢索結果 |
1. 已翻譯的GB標準英文版(有 SALE
標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。 2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。 |
GB/T 3690-2009 织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法(中英文版) Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method |
|||
GB/T 23655-2009 配合胶乳硫化程度的测定(中英文版) Test for the cure level of compound latex |
|||
GB/T 23654-2009 硫化橡胶和热塑性橡胶 建筑用预成型密封条的分类、要求和试验方法(中英文版) Rubber,vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification,specification and test methods |
|||
GB/T 23651-2009 硫化橡胶或热塑性橡胶 硬度测试 介绍与指南(中英文版) Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide |
|||
GB/T 14834-2009 硫化橡胶或热塑性橡胶 与金属粘附性及对金属腐蚀作用的测定(中英文版) Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals |
|||
GB/T 14124-2009 机械振动与冲击 建筑物的振动 振动测量及其对建筑物影响的评价指南(中英文版) Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings |
|||
GB/T 11211-2009 硫化橡胶或热塑性橡胶 与金属粘合强度的测定 二板法(中英文版) Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method |
|||
GB/T 11205-2009 橡胶 热导率的测定 热线法(中英文版) Rubber - Determination of thermal conductivity by means of hot -wire method |
|||
GB/T 23595.4-2009 白光LED灯用稀土黄色荧光粉试验方法 第4部分:热稳定性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 4: Determination of thermostability |
|||
GB/T 23536-2009 超硬磨料 人造金刚石品种(中英文版) Superabrasive - Types of synthetic diamond |
|||
GB/T 13835.8-2009 兔毛纤维试验方法 第8部分:乙醚萃取物含量(中英文版) Test method for rabbit hair - Part 8: Extractable matter by ether |
|||
GB/T 22925-2009 纳米技术处理服装(中英文版) Nanotechnology-treated clothes |
|||
GB/T 20936.3-2009 可燃性气体探测用电气设备 第3部分:显示空气中甲烷体积含量至100%的I类探测器的性能要求(中英文版) Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air |
|||
GB/T 13539.4-2009 低压熔断器 第4部分:半导体设备保护用熔断体的补充要求(中英文版) Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|||
GB/T 23690-2009 电子电气产品材料声明程序(中英文版) Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
|||
GB/T 6609.37-2009 氧化铝化学分析方法和物理性能测定方法 第37部分:粒度小于20μm颗粒含量的测定(中英文版) Chemical analysis methods and determination of physical performance of alumina - Part 37: Determination of the particles size content less then 20μm |
|||
GB/T 6609.30-2009 氧化铝化学分析方法和物理性能测定方法 第30部分:X射线荧光光谱法测定微量元素含量(中英文版) Chemical analysis methods and determination of physical performance of alumina - Part 30: X-ray fluorescence spectrometric method for the determination centent of trace elements |
|||
GB/T 23615.1-2009 铝合金建筑型材用辅助材料 第1部分:聚酰胺隔热条(中英文版) Accessorial material for architectural aluminum alloy profiles - Part 1: Thermal barrier strip of polyamide |
|||
GB/T 23585-2009 预防和降低苹果汁及其他饮料的苹果汁配料中展青霉素污染的操作规范(中英文版) Code of practice for the prevention and reduction of patulin contamination in apple juice and apple juice ingredients in other beverages |
|||
GB/T 23582.1-2009 立式车床检验条件 精度检验 第1部分:单柱和双柱立式车床(中英文版) Test conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: Single and double column vertical turning and boring lathes |
|||
GB/T 23569-2009 重型卧式车床检验条件 精度检验(中英文版) Test conditions for heavy duty horizontal lathe - Testing of the accuracy |
|||
GB/T 17421.3-2009 机床检验通则 第3部分:热效应的确定(中英文版) Test code for machine tools - Part 3: Determination of thermal effects |
|||
GB/T 16462.8-2009 数控车床和车削中心检验条件 第8部分:热变形的评定(中英文版) Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions |
|||
GB/T 16462.7-2009 数控车床和车削中心检验条件 第7部分:在坐标平面内轮廓特性的评定(中英文版) Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes |
|||
GB/T 23486-2009 城镇污水处理厂污泥处置 园林绿化用泥质(中英文版) The disposal of sludge from municipal wastewater treatment plant - The quality of sludge used in gardens or parks |
|||
GB/T 23485-2009 城镇污水处理厂污泥处置 混合填埋用泥质(中英文版) The disposal of sludge from municipal wastewater treatment plant - Quality of sludge for co-landfilling |
|||
GB/T 23484-2009 城镇污水处理厂污泥处置 分类(中英文版) The disposal of sludge from municipal wastewater treatment plant - The classification |
|||
GB/T 23517-2009 钌炭(中英文版) Ruthenium on activated carbon catalyst |
|||
GB/T 23516-2009 贵金属及其合金异型丝材(中英文版) Special wires of precious metals and their alloys |
|||
GB/T 23561.9-2009 煤和岩石物理力学性质测定方法 第9部分:煤和岩石三轴强度及变形参数测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock |
|||
GB/T 23561.8-2009 煤和岩石物理力学性质测定方法 第8部分:煤和岩石变形参数测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock |
|||
GB/T 23561.7-2009 煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient |
|||
GB/T 23561.6-2009 煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock |
|||
GB/T 23561.5-2009 煤和岩石物理力学性质测定方法 第5部分:煤和岩石吸水性测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock |
|||
GB/T 23561.4-2009 煤和岩石物理力学性质测定方法 第4部分:煤和岩石孔隙率计算方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock |
|||
GB/T 23561.3-2009 煤和岩石物理力学性质测定方法 第3部分:煤和岩石块体密度测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock |
|||
GB/T 23561.2-2009 煤和岩石物理力学性质测定方法 第2部分:煤和岩石真密度测定方法(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 2: Methods for determining the true density of coal and rock |
|||
GB/T 23561.1-2009 煤和岩石物理力学性质测定方法 第1部分:采样一般规定(中英文版) Methods for determining the physical and mechanical properties of coal and rock - Part 1: General requirements for sampling |
|||
GB/T 23384-2009 产品及零部件可回收利用标识(中英文版) The recovery marking of products and components |
|||
GB/T 15512-2009 评价企业节约钢铁材料技术导则(中英文版) Technical guides for evaluating the saving of iron and steel product in enterprise |
|||
GB/T 17280-2009 原油蒸馏标准试验方法 15-理论板蒸馏柱(中英文版) Standard test method for distillation of crude petroleum - 15-theoretical plate column |
|||
GB/T 23470.2-2009 感官分析 感官分析实验室人员一般导则 第2部分:评价小组组长的聘用和培训(中英文版) Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 2: Recruitment and training of panel leaders |
|||
GB/T 23470.1-2009 感官分析 感官分析实验室人员一般导则 第1部分:实验室人员职责(中英文版) Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 1: Staff responsibilities |
|||
GB/T 13868-2009 感官分析 建立感官分析实验室的一般导则(中英文版) Sensory analysis - General guidance for the design of test rooms |
|||
GB/T 23378-2009 食品中纽甜的测定方法 高效液相色谱法(中英文版) Method for the determination of Neotame in foods - High-performance liquid chromatography |
|||
GB/T 22838.16-2009 卷烟和滤棒物理性能的测定 第16部分:卷烟 端部掉落烟丝的测定 旋转笼法(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage |
|||
GB/T 23507.3-2009 石油钻机用电气设备规范 第3部分:电动钻机用柴油发电机组(中英文版) Criterion for electriacl equipment for oil drilling rig - Part 3: The diesel generating set for electric drilling rig |
|||
GB/T 23506-2009 石油采油井场燃气动力机组(中英文版) The natural gas power set for oil pruduction drilling site |
|||
GB/T 9166-2009 四柱液压机 精度(中英文版) Four-column hydraulic press - Testing of the accuracy |
|||
GB/T 10924-2009 闭式单、双点压力机 精度(中英文版) Straight sided single or two - Point mechanical power presses - Testing of the accuracy |
找到:7344條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [81] [82] [83] [84] [85] [86] [87] |