“Steel and alloy - De” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 40732-2021 焊縫無損檢測 超聲檢測 奧氏體鋼和鎳基合金焊縫檢測（中英文版） Non-destructive testing of welds—Ultrasonic testing—Testing of welds in austenitic steels and nickel-based alloys |
 |
|
|
|
GB/T 40341-2021 深海油田鑽採用高強韌合金結構鋼棒（中英文版） High strength and toughness alloy structure steel bars for deep sea oil field drilling and exploiting |
|
|
|
|
GB/T 40314-2021 金屬和合金的腐蝕 適用於不銹鋼平板或管狀試樣的碟形彈簧縫隙腐蝕構型（中英文版） Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel |
|
|
|
|
GB/T 223.91-2021 鋼鐵及合金 銅含量的測定 2，2'-聯喹啉分光光度法（中英文版） Iron, steel and alloy—Determination of copper—2,2’-Biquinoline spectrophotometric method |
|
|
|
|
GB/T 223.90-2021 鋼鐵及合金 矽含量的測定 電感耦合等離子體原子發射光譜法（中英文版） Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method |
|
|
|
|
GB/T 39280-2020 鎢極惰性氣體保護電弧焊用非合金鋼及細晶粒鋼實心焊絲（中英文版） Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels |
|
|
|
|
GB/T 8110-2020 熔化極氣體保護電弧焊用非合金鋼及細晶粒鋼實心焊絲（中英文版） Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels |
|
|
|
|
GB/T 39534-2020 （中英文版） Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids |
|
|
|
|
GB/T 223.37-2020 鋼鐵及合金 氮含量的測定 蒸餾分離靛酚藍分光光度法（中英文版） Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation |
|
|
|
|
GB/T 223.88-2019 鋼鐵及合金 鈣和鎂含量的測定 電感耦合等離子體原子發射光譜法（中英文版） Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method |
|
|
|
|
GB/T 37910.1-2019 焊縫無損檢測 射線檢測驗收等級 第1部分：鋼、鎳、鈦及其合金（中英文版） Non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloys |
|
|
|
|
GB/T 223.89-2019 鋼鐵及合金 碲含量的測定 氫化物發生-原子螢光光譜法（中英文版） Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method |
|
|
|
|
GB/T 37619-2019 金屬和合金的腐蝕 高頻電阻焊焊管溝槽腐蝕性能恒電位試驗與評價方法（中英文版） Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes |
|
|
|
|
GB/T 223.88-2019 鋼鐵及合金 鈣和鎂含量的測定 電感耦合等離子體原子發射光譜法（中英文版） Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method |
|
|
|
|
GB/T 223.87-2018 鋼鐵及合金 鈣和鎂含量的測定 電感耦合等離子體質譜法（中英文版） Iron,steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method |
|
|
|
|
GB/T 10045-2018 非合金鋼及細晶粒鋼藥芯焊絲（中英文版） Tubular cored electrodes for non-alloy and fine grain steels |
|
|
|
|
GB/T 19743-2018 粉末冶金用水霧化純鐵粉、合金鋼粉（中英文版） Water-atomized pure iron powder and alloyed steel powder for powder metallurgy |
|
|
|
|
GB/T 5293-2018 埋弧焊用非合金鋼及細晶粒鋼實心焊絲、藥芯焊絲和焊絲-焊劑組合分類要求（中英文版） Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels |
|
|
|
|
SY/T 6857.1-2012 石油天然氣工業特殊環境用油井管 第1部分:含h2s油氣田環境下碳鋼和低合金鋼油管和套管選用推薦做法（中英文版） Petroleum and natural gas industries. OCTG used for special environment. Part 1: Recommended practice on selection of casing and tubing of carbon and low alloy steels for use in sour service |
|
|
|
|
SH/T 3523-1999 石油化工鉻鎳奧氏體鋼、鐵鎳合金和鎳合金管道焊接規程（中英文版） Code for welding of Cr-Ni austenitic steel, Fe-Ni and Ni alloy pipe for petrochemical industry |
|
|
|
|
SH/T 3127-2001 石油化工管式爐鉻鉬鋼焊接回彎頭技術規範（中英文版） Technical standard for chrome-molybdenum alloy steel plug-welding return of petrochemical tubular heater |
|
|
|
|
SH 3085-1997 石油化工管式爐碳鋼和鉻鉬鋼爐管焊接技術條件（中英文版） Technical specification for welding of carbon steel and chrome-molybdenum alloy steel tube of petrochemical tubular heater |
|
|
|
|
NB/T 20005.7-2017 壓水堆核電廠用碳鋼和低合金鋼 第7部分：1、2、3級鋼板（中英文版） (Carbon steel and low alloy steels for PWR nuclear power plants - Part 7: Steel grades 1, 2 and 3) |
|
|
|
|
NB/T 20005.38-2017 壓水堆核電廠用碳鋼和低合金鋼 第38部分：安全殼機械貫穿件用15mnhr焊接鋼管（中英文版） (Carbon steel and low alloy steels for PWR nuclear power plants - Part 38: 15MnHR welded steel pipes for containment) |
|
|
|
|
NB/T 20009.30-2017 壓水堆核電廠用焊接材料 第30部分:安全1級設備埋弧焊用低合金鋼焊絲和焊劑（中英文版） (Welding materials for PWR nuclear power plants - Part 30: Safety grade 1 equipment - Low alloy steel welding wire and flux for submerged arc welding) |
|
|
|
|
NB/T 20005.15-2013 壓水堆核電廠用碳鋼和低合金鋼 第15部分：用填充金屬焊接的2、3級管件（中英文版） Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 15: Fittings welded with the addition of filler metal for use in class 2 and 3 auxiliary piping |
|
|
|
|
NB/T 20005.10-2013 壓水堆核電廠用碳鋼和低合金鋼 第10部分：用填充金屬焊接的2、3級鋼管（中英文版） Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 10: Class 2 and 3 steel pipes welded with the addition of filler metal |
|
|
|
|
NB/T 47008-2010 承壓設備用碳素鋼和合金鋼鍛件（中英文版） Carbon and alloy steel forgings for pressure equipment {Academic version} |
|
|
|
|
CJ/T 223-2006 合金鍍層（ha）鋼管及管件（中英文版） Steel pipes and fittings of the (HA) alloy deposits |
|
|
|
|
CJ/T 223-2006 合金鍍層（ha）鋼管及管件（中英文版） Steel pipes and fittings of the (HA) alloy deposits |
|
| 找到:125條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |
+86-755-2583-1330
