“Steel products--Meth” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 43900-2024 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法（中英文版） Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components |
 |
|
|
|
GB/T 36915-2019 钢丝及钢丝制品 通用试验方法（中英文版） Steel wire and wire products—General test methods |
|
|
|
|
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|
|
|
|
GB/T 18570.6-2011 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法（中英文版） Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method |
|
|
|
|
GB/T 13288.2-2011 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
|
|
|
|
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|
|
|
|
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB/T 10121-2008 钢材塔形发纹磁粉检验方法（中英文版） Steel products-Method for magnetic particle inspection of tower sample |
|
|
|
|
GB/T 1839-2008 钢产品镀锌层质量试验方法（中英文版） Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products |
|
|
|
|
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|
|
|
|
GB/T 8363-2007 铁素体钢落锤撕裂试验方法（中英文版） Test method for drop - Weight tear tests of steel products |
|
|
|
|
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|
|
|
|
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|
|
|
|
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|
|
|
|
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|
|
|
|
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
|
|
|
|
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|
|
|
|
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
|
|
|
|
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|
|
|
|
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|
|
|
|
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|
|
|
|
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|
|
|
|
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
|
|
|
|
GB/T 18839.3-2002 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning |
|
|
|
|
GB/T 18839.2-2002 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning |
|
|
|
|
GB/T 18839.1-2002 涂覆涂料前钢材表面处理 表面处理方法 总则（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles |
|
|
|
|
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法（中英文版） Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
|
|
|
|
GB/T 15711-1995 钢材塔形发纹酸浸检验方法（中英文版） Steel products--Method for etch test of towersample |
|
| 找到:29條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |
+86-755-2583-1330
