“Test conditions for ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版（有 SALE 標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。
2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。


	GB/T 5289.2-2021 臥式銑鏜床精度檢驗條件第2部分：帶移動立柱和固定工作臺的機床（中英文版） Test conditions for testing the accuracy of boring and milling machines with horizontal spindle—Part 2：Machines with movable column and fixed table
	GB/T 19216.3-2021 在火焰條件下電纜或光纜的線路完整性試驗第3部分：火焰溫度不低於830 ℃的供火拼施加衝擊振動，額定電壓0.6/1 kV及以下電纜穿在金屬管中進行的試驗方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure
	GB/T 19216.2-2021 在火焰條件下電纜或光纜的線路完整性試驗第2部分：火焰溫度不低於830 ℃的供火拼施加衝擊振動，額定電壓0.6/1 kV及以下外徑不超過20 mm電纜的試驗方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not
	GB/T 19216.1-2021 在火焰條件下電纜或光纜的線路完整性試驗第1部分：火焰溫度不低於830 ℃的供火拼施加衝擊振動，額定電壓0.6/1 kV及以下外徑超過20 mm電纜的試驗方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed
	GB/T 18400.10-2021 加工中心檢驗條件第10部分：熱變形的評定（中英文版） Test conditions for machining centres—Part 10：Evaluation of thermal distortions
	GB/T 39006-2020 工業機器人特殊氣候環境可靠性要求和測試方法（中英文版） Requirements and test methods of special climate conditions reliability for industrial robots
	YY/T 0616.5-2019 一次性使用醫用手套第5部分：抗化學品滲透持續接觸試驗方法（中英文版） Medical gloves for single use—Part 5:Test method for permeation of chemicals under conditions of continuous contact
	GB/T 38430-2019 金屬和合金的腐蝕金屬材料在高溫腐蝕條件下的等溫暴露氧化試驗方法（中英文版） Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
	GB/T 18271.2-2017 過程測量和控制裝置通用性能評定方法和程式第2部分：參比條件下的試驗（中英文版） Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions
	GB/T 8190.9-2017 往復式內燃機排放測量第9部分：壓燃式發動機瞬態工況排氣煙度的試驗台測量用試驗迴圈和測試規程（中英文版） Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
	GB/T 16462.3-2017 數控車床和車削中心檢驗條件第3部分：倒置立式機床幾何精度檢驗（中英文版） Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles
	GB/T 16462.2-2017 數控車床和車削中心檢驗條件第2部分：立式機床幾何精度檢驗（中英文版） Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle
	GB/T 16462.5-2017 數控車床和車削中心檢驗條件第5部分：進給率、速度和插補精度檢驗（中英文版） Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations
	GB/T 16462.6-2017 數控車床和車削中心檢驗條件第6部分：精加工試件精度檢驗（中英文版） Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece
	SH/T 0783-2005 內燃機油高溫氧化和抗磨損性能評定法（CEPT-Ⅲ法）（中英文版） Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (CEPT-Ⅲ method)
	SH/T 0758-2005 內燃機油高溫氧化和抗磨損性能評定法（程式ⅢE法）（中英文版） Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (Sequence-ⅢE method)
	NB/T 20133.2-2012 壓水堆核電廠設施設備防護塗層規範第2部分：塗層系統在類比設計基準事故條件下的評價試驗方法（中英文版） Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 2: Standard test method for evaluating coatings at simulated design basis accident(DBA)conditions
	NB/SH/T 0898-2015 汽車發動機油低溫油泥性能的評定程式ⅴg法（中英文版） Standard test method for evaluation of automotive engine oils for inhibition of deposit formation in a spark-ignition internal combustion engine fueled with gasoline and operated under low-temperature, light-duty conditions
	HG/T 2069-1991 旋轉軸唇形密封圈兩半軸式徑向力測定儀技術條件（中英文版） (Rotary shaft lip seals two axle-type radial force tester technical conditions)
	LS/T 3501.11-1993 糧油加工機械通用技術條件產品檢驗規則（中英文版） (General technical conditions for grain and oil processing machinery product testing rules)
	GB/T 19362.2-2017 龍門銑床檢驗條件精度檢驗第2部分：龍門移動式銑床（中英文版） Test conditions for bridge-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines
	GB/T 34880.2-2017 五軸聯動加工中心檢驗條件第2部分：立式機床精度檢驗（中英文版） Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine
	GB/T 34880.1-2017 五軸聯動加工中心檢驗條件第1部分：臥式機床精度檢驗（中英文版） Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine
	QB/T 4781-2014 手錶外觀件的外觀檢驗條件（中英文版） Test conditions for appearance of watch casings
	QB/T 4590-2013 文印材料通用技術條件和試驗方法（中英文版） General technical conditions and test methods for printing materials
	QB/T 1671-2017 紙與紙板物理性能試驗專用沖切樣器具通用技術條件（中英文版） (Paper and board - Physical properties test - Special technical conditions for punching and cutting equipment)
	JT/T 692-2007 夜間條件下逆反射體色度性能測試方法（中英文版） Test method for colorimetric characteristics of retroeflectors under nighttime conditions
	DL/T 987-2005 氧化鋅避雷器阻性電流測試儀通用技術條件（中英文版） General technical conditions of resistive current tester for zinc oxide surge arrester
	DL/T 539-1993 戶內交流高壓開關櫃和元部件凝露及污穢試驗技術條件（中英文版） Technical conditions for condensation and pollution test on high-voltage switch cabinets and elements
	GB/T 18859-2016 封閉式低壓成套開關設備和控制設備在內部故障引起電弧情況下的試驗導則（中英文版） Enclosed low-voltage switchgear and controlgear assemblies—Guide for testing under conditions of arcing due to internal fault

找到:160條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6