网站首頁   GB 中國國家標準檢索   GB標準關鍵詞 特價英文版GB標準   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“Test method of press” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 1927.12-2021
無疵小試樣木材物理力學性質試驗方法 第12部分:橫紋抗壓強度測定(中英文版)
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain
GB/T 40406-2021
炭素材料壓縮靜態彈性模量和泊松比測定方法(中英文版)
Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
GB/T 39794.2-2021
金屬屋面抗風掀性能檢測方法 第2部分:動態壓力法(中英文版)
Test method for wind uplift resistance of mental roof—Part 2:Dynamic pressure method
GB/T 39794.1-2021
金屬屋面抗風掀性能檢測方法 第1部分:靜態壓力法(中英文版)
Test method for wind uplift resistance of metal roof -- Part 1: Static pressure method
GB/T 39748.7-2021
失禁用尿吸收輔助器具 聚合物基質吸液材料特性的測試方法 第7部分:稱重法測定壓力作用下的吸液量(中英文版)
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure
GB/T 20081.3-2021
氣動 減壓閥和過濾減壓閥 第3部分:測試減壓閥流量特性的可選方法(中英文版)
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators
GB/T 19934.1-2021
液壓傳動 金屬承壓殼體的疲勞壓力試驗 第1部分:試驗方法(中英文版)
Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method
GB/T 1454-2021
夾層結構側壓性能試驗方法(中英文版)
Test method for edgewise compressive properties of sandwich constructions
GB/T 39709-2020
動車組玻璃、車窗耐靜壓及車窗密封性能試驗方法(中英文版)
Test methods of multiple units glass, windiows static pressure and windiows sealing performance
GB/T 39383-2020
埋地用無壓熱塑性塑膠管道系統 彈性密封圈接頭的密封性能試驗方法(中英文版)
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints
GB/T 35465.4-2020
聚合物基複合材料疲勞性能測試方法 第4部分:拉-壓和壓-壓疲勞(中英文版)
Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue
GB/T 15331-2020
壓敏膠粘帶水蒸氣透過率試驗方法(中英文版)
Test method for water vapor transmission rate of pressure-sensitive tapes
GB/T 15330-2020
壓敏膠粘帶水滲透率試驗方法(中英文版)
Test method for water penetration rate of pressure-sensitive tapes
GB/T 38989-2020
無機結合料穩定類材料單軸壓縮彈性模量試驗方法(中間段法)(中英文版)
Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder(middle segment method)
GB/T 9966.1-2020
天然石材試驗方法 第1部分:乾燥、水飽和、凍融迴圈後壓縮強度試驗(中英文版)
Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength
GB/T 1431-2019
炭素材料耐壓強度測定方法(中英文版)
The test method for compressive strength of carbon materials
GB/T 37825-2019
建築玻璃均布靜載模擬風壓試驗方法(中英文版)
Test method for simulating wind pressure resistance of building glass under the uniform static loads
GB/T 1431-2019
炭素材料耐壓強度測定方法(中英文版)
The test method for compressive strength of carbon materials
GB/T 36580-2018
船舶螺旋槳空泡脈動壓力模型試驗方法(中英文版)
Test method of model propeller for cavitation observation and pressure fluctuation measurement
GB/T 14513.1-2017
氣動 使用可壓縮流體元件的流量特性測定 第1部分:穩態流動的一般規則和試驗方法(中英文版)
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow
GB/T 35160.3-2017
合成石材試驗方法 第3部分:壓縮強度的測定(中英文版)
Test methods for agglomerated stone—Part 3:Determination of compressive strength
GB/T 33896-2017
分離膜外殼迴圈壓力試驗方法(中英文版)
Test method for cyclic pressure of membrane housing
SY/T 6423.7-1999
石油天然氣工業 承壓鋼管無損檢測方法 無縫和焊接鋼管管端分層缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of the ends of seamless and welded steel tubes for the detection of laminar imperfections
SY/T 6423.6-1999
石油天然氣工業 承壓鋼管無損檢測方法 無縫和焊接(埋弧焊除外)鋼管分層缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of seamless and welded (expect submerged arc-welded) steel tubes for the detection of laminar imperfections
SY/T 6423.5-1999
石油天然氣工業 承壓鋼管無損檢測方法 焊接鋼管製造用鋼帶/鋼板分層缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries-Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of strips/plates used in the manufacture of welded tubes for the detection of laminar imperfections
SY/T 6423.4-1999
石油天然氣工業 承壓鋼管無損檢測方法 焊接鋼管焊縫附近分層缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
SY/T 6423.3-1999
石油天然氣工業 承壓鋼管無損檢測方法 埋弧焊鋼管焊縫縱向和/或橫向缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of the weld seam submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfec
SY/T 6423.2-1999
石油天然氣工業 承壓鋼管無損檢測方法 電阻焊和感應焊鋼管焊縫縱向缺欠的超聲波檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Ultrasonic testing of the weld seam of elcctric resistance and induction welded steel tubes for the detection of longitudinal imp
SY/T 6423.1-1999
石油天然氣工業 承壓鋼管無損檢測方法 埋弧焊鋼管焊縫缺欠的射線檢測(中英文版)
Petroleum and natural gas industries. Non-destructive testing (NDT)methods of steel tubers for pressure purposes. Radiographic testing of the weld seam of submerged arc-welded steel tubes for the detection of imperfections
SY/T 5815-2008
岩石孔隙體積壓縮係數測定方法(中英文版)
Test method of rock pore volume compressibility

找到:192條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3 4 5 6 7

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2025  RJS MedTech Inc. All Rights Reserved