网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 42223-2022
纺织品 色牢度试验 耐摩擦色牢度 Gakushin法(中英文版)
Textiles - Tests for color fastness - Color fastness to rubbing Gakushin method
GB 16151.5-2008
农业机械运行安全技术条件 第5部分:挂车(中英文版)
Safety technical requirements for agricultural machinery operating - Part 5: trailer
GB/T 75-1985
开槽长圆柱端紧定螺钉(中英文版)
Slotted set screws with long dog point
GB 24939-2010
三轮汽车自卸系统 安全技术要求(中英文版)
Tri-wheel vehicle self-unloading system - Safety requirements
GB/T 33365-2016
钢筋混凝土用钢筋焊接网 试验方法(中英文版)
Weld steel fabric for the reinforcement of concrete—Test methods
GB/T 39909-2021
科技计划形成的科学数据汇交 通用数据元(中英文版)
Science and technology program-generated scientific data archiving—General data element
GB/T 13498-2007
高压直流输电术语(中英文版)
Terminology for high - voltage direct current(HVDC) transmission
GB/T 9966.2-2001
天然饰面石材试验方法 第2部分:干燥、水饱和弯曲强度试验方法(中英文版)
Test methods for natural facing stones--Part 2:Dry and wet test methods for flexural strength
GB/T 32371.1-2015
低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第1部分:通则(中英文版)
Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure
GB/T 28458-2012
信息安全技术 安全漏洞标识与描述规范(中英文版)
Information security technology - Vulnerability identification and description specification
GB/T 38725.2-2020
可盘绕式增强塑料管 第2部分:纤维增强热塑性塑料连续管(中英文版)
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe
GB 14891.3-1997
辐照干果果脯类卫生标准(中英文版)
Hygeinic standard for irradiated dried nuts andpreserved fruits
GB/T 23632-2009
进境植物检疫截获有害生物鉴定复核规程(中英文版)
Rule for identification of pests intercepted in entry plant quarantine
GB/T 37836-2019
聚乳酸/聚丁二酸丁二酯复合材料空气过滤板(中英文版)
Air filter plate made by polylactic acid/polybutylene succinate composite
GB/T 31270.19-2014
化学农药环境安全评价试验准则 第19部分:非靶标植物影响试验(中英文版)
Test guidelines on environmental safety assessment for chemical pesticides―Part 19: Effects on non-target plants
GB/T 9074.3-1988
十字槽盘头螺钉和弹簧垫圈组合件(中英文版)
Cross recessed pan head screw and single coil spring lock washer assemblies
GB/T 26461-2011
纸张凹版油墨(中英文版)
Gravure ink for paper
GB/T 12629-1990
限定燃烧性的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用)(中英文版)
Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
GB/T 36159-2018
建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择(中英文版)
Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications
GB/T 8542-2023
高速齿轮传动装置技术规范(中英文版)
Technical Specifications for High Speed Gear Transmissions
GB/T 15076.8-2008
钽铌化学分析方法 碳量和硫量的测定(中英文版)
Methods for chemical analysis of tantalum and niobium - Determination of carbon and sulphur contents
GB/T 18969-2003
饲料中有机磷农药残留量的测定 气相色谱法(中英文版)
Determination of residues of organaphosphorus in feeds--Gas chromatagraphic method
GB/T 22518-2008
容栅数显标尺(中英文版)
Capacitive digital scale units
GB/T 12690.6-2017
稀土金属及其氧化物中非稀土杂质化学分析方法 第6部分:铁量的测定 硫氰酸钾、1,10-二氮杂菲分光光度法(中英文版)
Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides—Part 6: Determination of iron content—Kslium thiocyanate, 1,10-Phenanthroline spectrophotometric method
GB/T 29872-2013
工业企业能源计量数据集中采集终端通用技术条件(中英文版)
Generic specification of energy metrology data concentrated collection terminal of industrial enterprise
GB/T 19879-2005
建筑结构用钢板(中英文版)
Steel Plates For Building Structure
GB/T 14338-2022
化学纤维 短纤维卷曲性能试验方法(中英文版)
Test method for crimp properties of chemical staple fibers
GB/T 17195-1997
工业炉名词术语(中英文版)
Industrial furnace terminology
GB/T 15224.2-2010
煤炭质量分级 第2部分:硫分(中英文版)
Classification for quality of coal - Part 2: Sulfur content
GB/T 35161-2017
超细硅酸盐水泥(中英文版)
Ultra-fine portland cement
GB/T 40285-2021
智能水电厂大坝安全分析评估系统技术规范(中英文版)
Technical specification for dam safety analysis and evaluation system of smart hydropower plant
GB/T 32619-2016
政务服务中心信息公开编码规范(中英文版)
Specifications for information disclosure coding of government affairs service centres
GB/T 28672-2012
汽车零部件再制造产品技术规范 交流发电机(中英文版)
The technical specifications for remanufacture of automotive components - Alternator
GB/T 39141.1-2020
无机和蓝宝石手表玻璃 第1部分:尺寸和公差(中英文版)
Mineral and sapphire watch-glasses—Part 1:Dimensions and tolerances
GB/T 3612-2008
量规、量具用硬质合金毛坯(中英文版)
Cemented carbide blanks for gauge blocks or measuring tools
GB/T 19324-2003
涂附磨具 带除尘孔砂页(中英文版)
Coated abrasives--Plain sheets with holes for dust extraction
GB/T 537-2009
工业十水合四硼酸二钠(中英文版)
Disodium tetraborate decahydrate for industrial use
GB/T 31469-2015
半导体材料切削液(中英文版)
Semiconductor materials cutting fluid
GB/T 18246-2019
饲料中氨基酸的测定(中英文版)
Determination of amino acids in feeds
GB/T 31061-2014
盾构法隧道管片用软木橡胶衬垫(中英文版)
Cork-rubber gasket for shield-driven tunnel
GB/T 20575-2006
鲜、冻肉生产良好操作规范(中英文版)
The specification of good manufacture practice for fresh and frozen meat processing
GB/T 26549-2011
涡轮增压器可变喷嘴环 通用技术条件(中英文版)
Turbocharger variable nozzle ring - General specifications
GB/T 4195-1984
钨、钼粉末粒度分布测试方法(沉降天平法)(中英文版)
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
GB/T 37194.2-2018
塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定(中英文版)
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 11356.2-2023
带传动 普通和窄V带轮槽形检验 第2部分:有效宽度制(中英文版)
Belt drives - Inspection of normal and narrow V-pulley grooves - Part 2: Effective width system
GB/T 22595-2008
杀生剂能效的评价方法 异养菌(中英文版)
Test method for efficacy of antimicrobials - Aerobic bacteria
GB/T 34720-2017
山羊接触传染性胸膜肺炎诊断技术(中英文版)
Diagnostic techniques for contagious caprine pleuropneumonia
GB/T 30094-2013
工业以太网交换机技术规范(中英文版)
Technical specification for industrial Ethernet switchs
GB/T 13776-1992
用校准棉样校准棉纤维试验结果(中英文版)
Standardizing cotton fibre test results by use of calibration cottons
GB/T 239.1-2023
金属材料 线材 第1部分:单向扭转试验方法(中英文版)
Metallic materials - wire rods - Part 1: Test method for unidirectional torsion

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [101] [102] [103] [104] [105] [106] [107]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved