中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 36230-2018 数控闭式多连杆压力机 性能要求与试验方法(中英文版) CNC Straight-side link-drive press—Performance requirements and test methods |
![]() |
|
![]() |
GB/T 43098.2-2023 水处理剂分析方法 第2部分:砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS)(中英文版) Analysis methods for water treatment agents Part 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) |
![]() |
|
![]() |
GB/T 29562.1-2013 起重机械用电动机能效测试方法 第1部分:YZP系列变频调速三相异步电动机(中英文版) Energy efficiency test procedures of motors for crane - Part 1: YZP series of variable-frequency adjustable-speed 3-phase asynchronous motors |
![]() |
|
![]() |
GB/T 34701-2017 再生烟气脱硝催化剂微量元素分析方法(中英文版) Microelement analysis method of regeneration DeNOx catalysts |
![]() |
|
![]() |
GB 24849-2010 家用和类似用途微波炉能效限定值及能效等级(中英文版) Minimum allowable values of energy efficiency and energy efficiency grades for household and similar microwave ovens |
![]() |
|
![]() |
GB/T 22162-2008 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸(中英文版) Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments |
![]() |
|
![]() |
GB/T 1040.2-2022 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件(中英文版) Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics |
![]() |
|
![]() |
GB/T 20898.2-2007 浸水服 第2部分:弃船服安全要求(中英文版) Immersion suits - Part 2: Abandonment suits,requirements including safety |
![]() |
|
![]() |
GB/T 19401-2003 客运拖牵索道技术规范(中英文版) Technology code for passengers surface lifts |
![]() |
|
![]() |
GB/T 4079-1994 用于电离辐射探测器的放大器和电荷灵敏前置放大器的测试方法(中英文版) Test procedures for amplifiers and charge-sensitive preamplifiers used with detectors of ionizing radiation |
![]() |
|
![]() |
GB/T 35460-2017 机织弹力裤(中英文版) Woven elasticity trousers |
![]() |
|
![]() |
GB/T 40345-2021 植物保护机械 确定可排放液体体积及浓度的试验方法(中英文版) Crop protection equipment—Test method for the determination of drainable volume and its concentration |
![]() |
|
![]() |
GB/T 17889.3-2012 梯子 第3部分:使用说明书(中英文版) Ladders - Part 3: User instructions |
![]() |
|
![]() |
GB/T 32875-2016 电子商务参与方分类与编码(中英文版) Classification and coding of E-commerce participants |
![]() |
|
![]() |
GB/T 23690-2009 电子电气产品材料声明程序(中英文版) Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
![]() |
|
![]() |
GB/T 40778.1-2021 物联网 面向Web开放服务的系统实现 第1部分:参考架构(中英文版) Internet of things—Web-oriented open service system implementation—Part 1:Reference architecture |
![]() |
|
![]() |
GB/T 12490-2014 纺织品 色牢度试验 耐家庭和商业洗涤色牢度(中英文版) Textiles―Tests for colour fastness―Colour fastness to domestic and commercial laundering |
![]() |
|
![]() |
GB/T 31780-2015 临界温度测量 电阻法测复合超导体临界温度(中英文版) Critical temperature measurement—Critical temperature of composite superconductors by a resistance method |
![]() |
|
![]() |
GB/T 39295-2020 水性胶粘剂触粘性的测定(中英文版) Determination of the tack for water based adhesive |
![]() |
|
![]() |
GB/T 16477.4-2010 稀土硅铁合金及镁硅铁合金化学分析方法 第4部分:硅量的测定(中英文版) Chemical analysis methods of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy - Part 4: Determination of silicon content |
![]() |
|
![]() |
GB/T 7736-2008 钢的低倍缺陷超声波检验法(中英文版) Ultrasonic inspecting method for macro-structure and imperfection of steel |
![]() |
|
![]() |
GB/T 4133-1984 莫氏圆锥的强制传动型式及尺寸(中英文版) The type and dimensions for positive drive of Morse tapers |
![]() |
|
![]() |
GB/T 22459.6-2008 耐火泥浆 第6部分:预搅拌泥浆含水量试验方法(中英文版) Refractory mortars - Part 6: Determination of moisture content of ready-mixed mortars |
![]() |
|
![]() |
GB/T 21379-2008 交通管理信息属性分类与编码 城市道路(中英文版) Classification and coding of the attribute of traffic management information - City road |
![]() |
|
![]() |
GB/T 19608.1-2004 特殊环境条件分级 第1部分:干热(中英文版) Classification of specific environmental condition--Part 1:Dry heat |
![]() |
|
![]() |
GB 15980-1995 一次性使用医疗用品卫生标准(中英文版) Hygienic standard of disinfection for single use medical products |
![]() |
|
![]() |
GB/T 37257-2018 风力发电机组-机械载荷测量(中英文版) Wind turbines—Measurement of mechanical loads |
![]() |
|
![]() |
GB/T 43457-2023 空间科学实验样品发射前准备与安装要求(中英文版) Preparation and installation requirements for space science experiment samples before launch |
![]() |
|
![]() |
GB/T 10357.1-2013 家具力学性能试验 第1部分:桌类强度和耐久性(中英文版) Test of mechanical properties of furniture - Part 1:Strength and durabilty of tables |
![]() |
|
![]() |
GB/T 5796.2-2005 梯形螺纹 第2部分:直径与螺距系列(中英文版) Trapezoidal screw threads-Part 2:General plan |
![]() |
|
![]() |
GB/T 1043.2-2018 塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验(中英文版) Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test |
![]() |
|
![]() |
GB/T 25024-2010 铁道货车二轴转向架通用技术条件(中英文版) General technical specification for two-axle bogie for railway freight wagon |
![]() |
|
![]() |
GB/T 42594-2023 承压设备介质危害分类导则(中英文版) Guidelines for Hazard Classification of Media for Pressure Equipment |
![]() |
|
![]() |
GB 13567-1998 电火花加工机床 安全防护技术要求(中英文版) Electro-discharge machines--Technical requirements for safeguarding |
![]() |
|
![]() |
GB/T 33765-2017 地面光伏系统用直流连接器(中英文版) DC connector for terrestrial photovoltaic systems |
![]() |
|
![]() |
GB/T 42018-2022 信息技术 人工智能 平台计算资源规范(中英文版) Information Technology Artificial Intelligence Platform Computing Resource Specifications |
![]() |
|
![]() |
GB/T 28558-2012 超临界及超超临界机组参数系列(中英文版) Supercritical and ultra-supercritical generating set parameter series |
![]() |
|
![]() |
GB/T 33086-2016 水处理剂 砷和汞含量的测定 原子荧光光谱法(中英文版) Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry |
![]() |
|
![]() |
GB/T 20528.2-2009 使用基于平板视觉显示器工作的人类工效学要求 第2部分:平板显示器的人类工效学要求(中英文版) Ergonomics requirements for work with visual display based on flat panels - Part 2: Ergonomics requirements for flat panel displays |
![]() |
|
![]() |
GB/T 4857.9-2008 包装 运输包装件基本试验 第9部分:喷淋试验方法(中英文版) Packaging - Basic tests for transport packages - Part 9:Water spray test |
![]() |
|
![]() |
GB/T 16296-1996 声学 测听方法 第2部分:用纯音及窄带测试信号的声场测听(中英文版) Acoustics--Audiometric test methods--Part 2:Sound field audiometry with pure tone and narrow-band test signals |
![]() |
|
![]() |
GB/T 41213-2021 集成电路用全自动装片机(中英文版) Integrated circuit full automatic die bonder |
![]() |
|
![]() |
GB/T 31308.1-2014 商业、工业和行政的过程、数据元和单证 长效签名规范 第1部分:CMS高级电子签名(CAdES)的长效签名规范(中英文版) Processes, data elements and documents in commerce, industry and administration―Long term signature profiles―Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) |
![]() |
|
![]() |
GB/T 20462.1-2006 汽车用热塑性非增强软管和软管 第1部分: 非燃油用(中英文版) Thermoplastic tubing and hoses for automotive use―Part 1: Non-fuel applications |
![]() |
|
![]() |
GB/T 32108-2015 浸胶线绳、纱线和帘线拉伸性能的试验方法(中英文版) Test methods of tensile properties for dipped yarns and cords |
![]() |
|
![]() |
GB/T 39567-2020 多旋翼无人机用无刷伺服电动机系统通用规范(中英文版) General specification for brushless servo motor systems for multi-rotor unmanned aircraft |
![]() |
|
![]() |
GB/T 26492.4-2011 变形铝及铝合金铸锭及加工产品缺陷 第4部分:铝箔缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - Part 4: Defects for foils |
![]() |
|
![]() |
GB 12257-2000 氦氖激光治疗机通用技术条件(中英文版) General specification of He-Ne laser medical equipment |
![]() |
|
![]() |
GB/T 5009.9-2008 食品中淀粉的测定(中英文版) Determination of starch in foods |
![]() |
|
![]() |
GB/T 21327-2019 水面蒸发器(中英文版) Evaporator of water surface |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [448] [449] [450] [451] [452] [453] [454] |