China Plastics and plastic GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 15597.2-2024 Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 - 中英文版 |
 |
|
|
|
GB/T 15597.1-2024 Plastics - Polymethyl methacrylate (PMMA) molding and extrusion materials - Part 1: Nomenclature system and classification basis 塑料-聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料-第1部分：命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 43289-2023 Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 - 中英文版 |
|
|
|
|
GB/T 43288-2023 Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 43282.2-2023 Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法 - 中英文版 |
|
|
|
|
GB/T 43275-2023 Screening and determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy plastics by energy dispersive X-ray fluorescence spectrometry 玩具塑料中锑、砷、钡、镉、铬、铅、汞、硒元素的筛选测定 能量色散X射线荧光光谱法 - 中英文版 |
|
|
|
|
GB/T 41312.3-2023 Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 - 中英文版 |
|
|
|
|
GB/T 43355-2023 Determination of antiviral activity on surfaces of plastics and other non-porous materials 塑料和其他无孔材料表面抗病毒活性的测定 - 中英文版 |
|
|
|
|
GB/T 43297-2023 Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 - 中英文版 |
|
|
|
|
GB/T 42918.2-2023 Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 31402-2023 Determination of antimicrobial activity on surfaces of plastics and other non-porous materials 塑料和其他无孔材料表面抗菌活性的测定 - 中英文版 |
|
|
|
|
GB/T 21461.2-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 21461.1-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 43084.2-2023 Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 43084.1-2023 Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 1: Nomenclature system and basis for classification 塑料 含氟聚合物分散体、模塑和挤出材料 第1部分:命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 1630.2-2023 Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 - 中英文版 |
|
|
|
|
GB/T 12598-2023 Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 - 中英文版 |
|
|
|
|
GB/T 42924.1-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 - 中英文版 |
|
|
|
|
GB/T 42920-2023 Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic composites 塑料 纤维增强塑料复合材料耐火特性和防火性能的评定 - 中英文版 |
|
|
|
|
GB/T 42919.6-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 - 中英文版 |
|
|
|
|
GB/T 42919.4-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method 塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法 - 中英文版 |
|
|
|
|
GB/T 42919.3-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 - 中英文版 |
|
|
|
|
GB/T 42919.1-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles 塑料 导热系数和热扩散系数的测定 第1部分:通则 - 中英文版 |
|
|
|
|
GB/T 42918.1-2023 Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 1: Nomenclature system and basis for classification 塑料 模塑和挤出用热塑性聚氨酯 第1部分：命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 7139-2023 Plastics. Homopolymers and copolymers of vinyl chloride. Determination of chlorine content. 塑料 氯乙烯均聚物和共聚物 氯含量的测定 - 中英文版 |
|
|
|
|
GB/T 41638.3-2023 Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints 塑料 生物基塑料的碳足迹和环境足迹 第3部分：过程碳足迹 量化要求与准则 - 中英文版 |
|
|
|
|
GB/T 41638.2-2023 Plastics - Carbon and environmental footprints of bio-based plastics - Part 2: Carbon footprint of materials - Amount (mass) of CO2 incorporated into polymer molecules from the air 塑料 生物基塑料的碳足迹和环境足迹 第2部分：材料碳足迹 由空气中并入到聚合物分子中CO2的量（质量） - 中英文版 |
|
|
|
|
GB/T 42764-2023 Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 - 中英文版 |
|
|
|
|
GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 中英文版 |
|
|
|
|
GB/T 41638.1-2022 Plastics - Carbon and environmental footprints of bio-based plastics - Part 1: General principles 塑料 生物基塑料的碳足迹和环境足迹 第1部分：通则 - 中英文版 |
|
|
|
|
GB/T 2546.2-2022 Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 2546.1-2022 Plastics - Polypropylene (PP) molding and extrusion materials - Part 1: Nomenclature system and basis of classification 塑料 聚丙烯(PP)模塑和挤出材料 第1部分:命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 41489-2022 Plastics polyamide determination by gas chromatography ε- Caprolactam and ω- Dodecalactam 塑料 聚酰胺 气相色谱法测定ε-己内酰胺和ω-十二内酰胺 - 中英文版 |
|
|
|
|
GB/T 41974.1-2022 Plastics - Color masterbatches - Part 1: Nomenclature system and basis of classification 塑料 色母料 第1部分：命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 中英文版 |
|
|
|
|
GB/T 41931-2022 Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 - 中英文版 |
|
|
|
|
GB/T 41932-2022 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 - 中英文版 |
|
|
|
|
GB/T 41934-2022 Plastics - Determination of vertical flame spread of films and sheets 塑料 薄膜和薄片垂直火焰蔓延的测定 - 中英文版 |
|
|
|
|
GB/T 19466.5-2022 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 - 中英文版 |
|
|
|
|
GB/T 41936.2-2022 Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 - 中英文版 |
|
|
|
|
GB/T 41758.1-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 1: Nomenclature system and basis of classification 塑料 聚酮（PK）模塑和挤出材料 第1部分：命名系统和分类基础 - 中英文版 |
|
|
|
|
GB/T 1038.2-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 - 中英文版 |
|
|
|
|
GB/T 1038.1-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 - 中英文版 |
|
|
|
|
GB/T 41792-2022 Plastics - Films and sheets - Determination of cold cracking temperature 塑料制品 薄膜和薄片 冷裂温度的测定 - 中英文版 |
|
|
|
|
GB/T 41791-2022 Plastics Films and sheets Non-oriented polyethylene terephthalate (PET) sheet 塑料制品 薄膜和薄片 无取向聚对苯二甲酸乙二醇酯（PET）片材 - 中英文版 |
|
|
|
|
GB/T 1844.3-2022 Plastics - Symbols and abbreviations - Part 3: Plasticizers 塑料 符号和缩略语 第3部分：增塑剂 - 中英文版 |
|
|
|
|
GB/T 1844.2-2022 Plastics - Symbols and abbreviations - Part 2: Fillers and reinforcing materials 塑料 符号和缩略语 第2部分：填料和增强材料 - 中英文版 |
|
|
|
|
GB/T 41709-2022 Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 - 中英文版 |
|
|
|
|
GB/T 1844.1-2022 Plastics - Symbols and abbreviations - Part 1: Base polymers and their characteristic properties 塑料 符号和缩略语 第1部分：基础聚合物及其特征性能 - 中英文版 |
|
|
|
|
GB/T 41877.1-2022 Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础 - 中英文版 |
|
| Find out:385Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |
+86-755-2583-1330
