China Inspection and testi GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 5170.21-2023 Inspection methods for environmental testing equipment Part 21: Hydraulic vibration systems for vibration (random) testing 环境试验设备检验方法 第21部分：振动（随机）试验用液压式振动系统 - 中英文版 |
 |
|
|
|
GB/T 5905.1-2023 Cranes - Inspection and testing specifications - Part 1: General principles 起重机 检验与试验规范 第1部分：通则 - 中英文版 |
|
|
|
|
GB/T 42399.3-2023 Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: Combined systems 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 - 中英文版 |
|
|
|
|
GB/T 42399.2-2023 Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 2: Probes 无损检测仪器 相控阵超声设备的性能与检验 第2部分：探头 - 中英文版 |
|
|
|
|
GB/T 42399.1-2023 Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 1: Instruments 无损检测仪器 相控阵超声设备的性能与检验 第1部分：仪器 - 中英文版 |
|
|
|
|
GB/T 41644-2022 Fireworks and firecrackers - Inspection and testing methods 烟花爆竹 检验检测方法 - 中英文版 |
|
|
|
|
GB/T 16507.6-2022 Water-tube boilers—Part 6: Inspection, testing and acceptance 水管锅炉 第6部分：检验、试验和验收 - 中英文版 |
|
|
|
|
GB/T 16857.9-2022 Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 9: Coordinate Measuring Machines Equipped with Multiple Probing Systems 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第9部分：配备多种探测系统的坐标测量机 - 中英文版 |
|
|
|
|
GB/T 16857.8-2022 Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 8: Coordinate Measuring Machines Using Optical Distance Sensors 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第8部分：使用光学距离传感器的坐标测量机 - 中英文版 |
|
|
|
|
GB/T 16857.12-2022 Geometric product specification (GPS) Acceptance testing and re-inspection testing of coordinate measuring systems (CMS) Part 12: Coordinate measuring machines with articulated arms 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第12部分：关节臂式坐标测量机 - 中英文版 |
|
|
|
|
GB/T 16825.1-2022 Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) compression testing machines - Inspection and calibration of force measuring systems 金属材料 静力单轴试验机的检验与校准 第1部分：拉力和（或）压力试验机 测力系统的检验与校准 - 中英文版 |
|
|
|
|
GB/T 20050-2020 Inspection and testing specifications of large-scale amusement device—General principles 大型游乐设施检验检测 通用要求 - 中英文版 |
|
|
|
|
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 - 中英文版 |
|
|
|
|
GB/T 20801.5-2020 Pressure piping code—Industrial piping—Part 5:Inspection and testing 压力管道规范 工业管道 第5部分:检验与试验 - 中英文版 |
|
|
|
|
GB/T 27423-2019 Conformity assessment—Guide to risk management for Inspection and testing services 合格评定 检验检测服务风险管理指南 - 中英文版 |
|
|
|
|
GB/T 18442.5-2019 Static vacuum insulated cryogenic pressure vessels—Part 5：Inspection and testing 固定式真空绝热深冷压力容器 第5部分：检验与试验 - 中英文版 |
|
|
|
|
GB/T 22701-2019 Rules of testing and inspection for professional clothing 职业服装检验规则 - 中英文版 |
|
|
|
|
GB/T 20730.2-2019 Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems—Part 2:Guidance for inspection and routine testing 工业过程控制系统用模拟输入两位或多位输出仪表 第2部分:检查和例行试验导则 - 中英文版 |
|
|
|
|
GB/T 37140-2018 Technical requirements acceptance specification for Inspection and testing laboratory 检验检测实验室技术要求验收规范 - 中英文版 |
|
|
|
|
GB/T 35974.5-2018 Plastics and plastic lining pressure vessels—Part 5: Fabrication, Inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分：塑料衬里制压力容器的制造、检查与检验 - 中英文版 |
|
|
|
|
GB/T 35974.4-2018 Plastics and plastic lining pressure vessels—Part 4: Fabrication, Inspection and testing for plastic pressure vessels 塑料及其衬里制压力容器 第4部分：塑料制压力容器的制造、检查与检验 - 中英文版 |
|
|
|
|
GB/T 20935.2-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 - 中英文版 |
|
|
|
|
GB/T 33905.5-2017 Intelligent sensor—Part 5：Methods for inspection and routine testing 智能传感器 第5部分：检查和例行试验方法 - 中英文版 |
|
|
|
|
GB/T 33885-2017 Non-destructive testing instruments—General requirements for sampling,routine inspection and type inspection 无损检测仪器 抽样、出厂检验、型式检验基本要求 - 中英文版 |
|
|
|
|
GB/T 5170.10-2017 Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 5：Damp heat testing equipments 电工电子产品环境试验设备检验方法 第5部分：湿热试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.1-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 1：General 电工电子产品环境试验设备检验方法 第1部分：总则 - 中英文版 |
|
|
|
|
GB/T 32146.3-2015 Technical requirements of design and construction for Inspection and testing laboratory—Part 3: Food laboratory 检验检测实验室设计与建设技术要求 第3部分：食品实验室 - 中英文版 |
|
|
|
|
GB/T 32146.2-2015 Technical requirements of design and construction for Inspection and testing laboratory—Part 2: Electrical laboratory 检验检测实验室设计与建设技术要求 第2部分：电气实验室 - 中英文版 |
|
|
|
|
GB/T 32146.1-2015 Technical requirement of design and construction for Inspection and testing laboratory—Part 1: General specification 检验检测实验室设计与建设技术要求 第1部分：通用要求 - 中英文版 |
|
|
|
|
GB/T 17213.4-2015 Industrial-process control valves—Part 4: Inspection and routine testing 工业过程控制阀 第4部分：检验和例行试验 - 中英文版 |
|
|
|
|
GB/T 32228-2015 Ships and marine technology—Pyrotechnic life-saving appliance—Testing, inspection and marking of production units 船舶与海上技术 烟火救生设施 产品的试验、检验和标识 - 中英文版 |
|
|
|
|
GB/T 15552-2015 Testing methods and inspection regulations for silk fabrics 丝织物试验方法和检验规则 - 中英文版 |
|
|
|
|
GB/T 20819.2-2015 Controllers with analogue signals for use in industrial-process control systems—Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号调节器 第2部分：检查和例行试验导则 - 中英文版 |
|
|
|
|
GB/T 17614.2-2015 Transmitters for use in industrial-process control systems—Part 2: Methods for inspection and roution testing 工业过程控制系统用变送器 第2部分：检查和例行试验方法 - 中英文版 |
|
|
|
|
GB 15579.4-2014 Arc welding equipment—Part 4: Periodic Inspection and testing 弧焊设备 第4部分：周期检查和试验 - 中英文版 |
|
|
|
|
GB/T 16507.6-2013 Water-tube boilers―Part 6：Inspection,testing and acceptance 水管锅炉 第6部分：检验、试验和验收 - 中英文版 |
|
|
|
|
GB 150.4-2011 Pressure vessels - Part 4: Fabrication,Inspection and testing,and acceptance 压力容器 第4部分：制造、检验和验收 - 中英文版 |
|
|
|
|
GB/T 26480-2011 Valve Inspection and testing 阀门的检验和试验 - 中英文版 |
|
|
|
|
GB/T 25976-2010 Ship and marine technology - Position-indicating lights for life-saving appliances - Testing,inspection and marking of production units 船舶和海上技术 救生设备示位灯 产品的试验、检查和标志 - 中英文版 |
|
|
|
|
GB/T 25343.5-2010 Railway applications - Welding of railway vehicles and components - Part 5: Inspection,testing and documentation 铁路应用 轨道车辆及其零部件的焊接 第5部分：检验、试验及文件 - 中英文版 |
|
|
|
|
GB/T 20935.2-2009 Method of electromagnetic acoustic inspection for metal materials - Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer(EMAT)techniques 金属材料电磁超声检验方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 - 中英文版 |
|
|
|
|
GB/T 14099.8-2009 Gas turbines - Procurement - Part 8: Inspection-testing-installation and commissioning 燃气轮机 采购 第8部分：检查、试验、安装和调试 - 中英文版 |
|
|
|
|
GB/T 5170.21-2008 Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration(random) test 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台 - 中英文版 |
|
|
|
|
GB/T 17614.2-2008 Transmitters for use industrial-process control systems - Part 2: Methods for inspection and routine testing 工业过程控制系统用变送器 第2部分: 检查和例行试验方法 - 中英文版 |
|
|
|
|
GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products - Solar radiation testing equipments 电工电子产品环境试验设备检验方法 太阳辐射试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products - Salt mist testing equipments 电工电子产品环境试验设备检验方法 盐雾试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products - Damp heat testing equipments 电工电子产品环境试验设备检验方法 湿热试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments 电工电子产品环境试验设备检验方法 温度试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products - General 电工电子产品环境试验设备检验方法 总则 - 中英文版 |
|
| Find out:65Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
