China Determination of ess GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 41980.1-2022 Hydraulic transmissions - Determination of pressure fluctuations in systems and components - Part 1: Hydraulic pumps (precision method) 液压传动 系统和元件中压力波动的测定方法 第1部分：液压泵（精密法） - 中英文版 |
 |
|
|
|
GB/T 11059-2022 Determination of vapor pressure of crude oil - Expansion method 原油蒸气压的测定 膨胀法 - 中英文版 |
|
|
|
|
GB/T 40414-2021 Determination of thickness for floating-floor thermal insulating products 浮筑地面用绝热制品厚度的测量 - 中英文版 |
|
|
|
|
GB/T 22889-2021 Leather—Physical and mechanical tests—Determination of surface coating thickness 皮革 物理和机械试验 表面涂层厚度的测定 - 中英文版 |
|
|
|
|
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 - 中英文版 |
|
|
|
|
GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 - 中英文版 |
|
|
|
|
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 - 中英文版 |
|
|
|
|
GB/T 1927.19-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 - 中英文版 |
|
|
|
|
GB/T 1927.12-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 - 中英文版 |
|
|
|
|
GB/T 40913-2021 Method for the determination of the hot-end coating thickness of glass bottle 玻璃瓶罐热端涂层厚度的测定方法 - 中英文版 |
|
|
|
|
GB/T 40744-2021 Determination of solanesol in potato stems，leaves and their processed products. High performance liquid chromatography-mass spectrometry 马铃薯茎叶及其加工制品中茄尼醇的含量测定 高效液相色谱-质谱法 - 中英文版 |
|
|
|
|
GB/T 40938-2021 Leather—Physical and mechanical tests—Determination of water penetration pressure 皮革 物理和机械试验 水渗透压测定 - 中英文版 |
|
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 中英文版 |
|
|
|
|
GB/T 39560.8-2021 Determination of certain substances in electrical and electronic products—Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS) 电子电气产品中某些物质的测定 第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法 （Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯 - 中英文版 |
|
|
|
|
GB/T 1687.4-2021 Rubber,vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 4: Constant-stress flexometer 硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第4部分：恒应力屈挠试验 - 中英文版 |
|
|
|
|
GB/T 39520-2020 Test method for determination the residual stress of spring by X-ray diffraction 弹簧残余应力的X射线衍射测试方法 - 中英文版 |
|
|
|
|
GB/T 39534-2020 Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids 金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法 - 中英文版 |
|
|
|
|
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method） 耐火材料 应力应变试验方法(三点弯曲法) - 中英文版 |
|
|
|
|
GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 - 中英文版 |
|
|
|
|
GB/T 24328.11-2020 Tissue paper and tissue products—Part 11: Determination of optical properties—Measurement of brightness and colour—C/2°(indoor daylight) illuminant 卫生纸及其制品 第11部分：光学性能的测定 亮度和颜色的测定 C/2°（室内日光条件） - 中英文版 |
|
|
|
|
GB/T 24328.2-2020 Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk 卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定 - 中英文版 |
|
|
|
|
GB/T 24328.8-2020 Tissue paper and tissue products—Part 8: Determination of optical properties—Measurement of brightness and colour—D65/10°（outdoor daylight conditions) 卫生纸及其制品 第8部分：光学性能的测定 亮度和颜色的测定 D65/10°（室外日光条件） - 中英文版 |
|
|
|
|
GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope 贵金属复合材料覆层厚度的扫描电镜测定方法 - 中英文版 |
|
|
|
|
GB/T 36014.2-2020 Industrial process control devices—Radiation thermometers—Part 2：Determination of the technical data for radiation thermometers 工业过程控制装置 辐射温度计 第2部分：辐射温度计技术参数的确定 - 中英文版 |
|
|
|
|
GB/T 14513.3-2020 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems 气动 使用可压缩流体元件的流量特性测定 第 3 部分：系统稳态流量特性的计算方法 - 中英文版 |
|
|
|
|
GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test 金属材料 管 测定双轴应力-应变曲线的液压胀形试验方法 - 中英文版 |
|
|
|
|
GB/T 12729.4-2020 Spices and condiments—Determination of degree of fineness of grinding（hand sieving method） 香辛料和调味品 磨碎细度的测定（手筛法） - 中英文版 |
|
|
|
|
GB/T 9966.5-2020 Test methods for natural stone--Part 5: Determination of hardness 天然石材试验方法 第5部分：硬度试验 - 中英文版 |
|
|
|
|
GB/T 9966.1-2020 Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength 天然石材试验方法 第1部分：干燥、水饱和、冻融循环后压缩强度试验 - 中英文版 |
|
|
|
|
GB/T 38506-2020 Determination of biochemical parameters in animal cell culture process 动物细胞培养过程中生化参数的测定方法 - 中英文版 |
|
|
|
|
GB/T 38493-2020 Sensory analysis—Assessment (determination and verification) of the shelf life of foodstuffs 感官分析 食品货架期评估（测评和确定） - 中英文版 |
|
|
|
|
GB/T 39648-2020 Textiles—Tests for colour fastness—Determination of colour fastness grades by digital imaging techniques 纺织品 色牢度试验 数字图像技术评级 - 中英文版 |
|
|
|
|
GB/T 39560.701-2020 Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on metals by the colorimetric method 电子电气产品中某些物质的测定 第7-1部分：六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬[Cr(VI)] - 中英文版 |
|
|
|
|
GB/T 39693.6-2020 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 - 中英文版 |
|
|
|
|
GB/T 39371-2020 Leather—Physical and mechanical tests—Determination of softness 皮革 物理和机械试验 柔软度的测定 - 中英文版 |
|
|
|
|
GB/T 39307-2020 Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring 荧光增白剂 色光和增白强度的测定 塑料着色法 - 中英文版 |
|
|
|
|
GB/T 28125.2-2020 Gas analysis—Determination of hazardous materials in air separation process—Part 2:Determination of mineral oil 气体分析 空分工艺中危险物质的测定 第2部分：矿物油的测定 - 中英文版 |
|
|
|
|
GB/T 24981.2-2020 Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness 稀土长余辉荧光粉试验方法 第2部分：余辉亮度的测定 - 中英文版 |
|
|
|
|
GB/T 38477-2020 Determination of gene expression—Western blot 基因表达的测定 蛋白印迹法 - 中英文版 |
|
|
|
|
GB/T 7755.2-2019 Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 - 中英文版 |
|
|
|
|
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 - 中英文版 |
|
|
|
|
GB/T 38411-2019 Leather chemicals—Determination of the free formaldehyde in leather process auxiliaries 皮革化学品 皮革加工助剂中游离甲醛的测定 - 中英文版 |
|
|
|
|
GB/T 7755.2-2019 Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 - 中英文版 |
|
|
|
|
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 - 中英文版 |
|
|
|
|
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve 金属材料 压入试验 强度、硬度和应力-应变曲线的测定 - 中英文版 |
|
|
|
|
GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method 漆膜厚度的测定 超声波测厚仪法 - 中英文版 |
|
|
|
|
GB/T 1724-2019 Paints,varnishes and printing inks—Determination of fineness of grind 色漆、清漆和印刷油墨 研磨细度的测定 - 中英文版 |
|
|
|
|
GB/T 23901.5-2019 Non-destructive testing—Image quality of radiographs—Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators 无损检测 射线照相检测图像质量 第5部分：双丝型像质计图像不清晰度的测定 - 中英文版 |
|
|
|
|
GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature 烧结金属材料室温压缩强度的测定 - 中英文版 |
|
|
|
|
GB/T 10066.6-2018 Test methods for electroheating and electromagnetic processing installations—Part 6：Test methods for the determination of power output of industrial microwave heating installations 电热和电磁处理装置的试验方法-第6部分：工业微波加热装置输出功率的测定方法 - 中英文版 |
|
| Find out:406Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 |
+86-755-2583-1330
