China Test method for stre GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 18147.5-2015 Test method for hemp fiber—Part 5: Test method for breaking strength of hemp fiber 大麻纤维试验方法 第5部分：断裂强度试验方法 - 中英文版 |
 |
|
|
|
GB/T 31541-2015 Test method for interfacial bond strength of fine ceramic materials—Cross-bonded 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法 - 中英文版 |
|
|
|
|
GB/T 31494-2015 Technical requirements and test methods for field strength meter of digital television 数字电视场强测试仪技术要求和测量方法 - 中英文版 |
|
|
|
|
GB/T 31334.1-2015 Test methods for dipped canvas—Part 1: Adhesion strength 浸胶帆布试验方法 第1部分：粘合强度 - 中英文版 |
|
|
|
|
GB/T 24218.18-2014 Textiles―Test methods for nonwovens―Part 18: Determination of breaking strength and elongation （grab method） 纺织品 非织造布试验方法 第18部分：断裂强力和断裂伸长率的测定(抓样法) - 中英文版 |
|
|
|
|
GB/T 31093-2014 Test method for stress of monocrystalline sapphire ingot 蓝宝石晶锭应力测试方法 - 中英文版 |
|
|
|
|
GB/T 30969-2014 Test method for short-beam shear strength of polymer matrix composite materials 聚合物基复合材料短梁剪切强度试验方法 - 中英文版 |
|
|
|
|
GB/T 30968.4-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分：开孔压缩强度试验方法 - 中英文版 |
|
|
|
|
GB/T 30968.3-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分：开孔拉伸强度试验方法 - 中英文版 |
|
|
|
|
GB/T 30202.3-2013 Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and compression strength 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分：耐磨强度、耐压强度 - 中英文版 |
|
|
|
|
GB 17578-2013 Requirements and test methods of strength for the superstructure of bus 客车上部结构强度要求及试验方法 - 中英文版 |
|
|
|
|
GB/T 29417-2012 Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete 水泥砂浆和混凝土干燥收缩开裂性能试验方法 - 中英文版 |
|
|
|
|
GB/T 28786-2012 Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 - 中英文版 |
|
|
|
|
GB/T 27723-2011 Test method for torsional strength of top piece attachment 皮鞋跟面扭转强度试验方法 - 中英文版 |
|
|
|
|
GB/T 27749-2011 Test procedure for thermal endurance of insulating varnishes - Electric strength method 绝缘漆耐热性试验规程 电气强度法 - 中英文版 |
|
|
|
|
GB/T 26739-2011 Road vehicles - Brake linings - Test method for internal shear strength of lining material 道路车辆 制动衬片 材料内剪切强度试验方法 - 中英文版 |
|
|
|
|
GB/T 26140-2010 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction 无损检测 测量残余应力的中子衍射方法 - 中英文版 |
|
|
|
|
GB/T 24218.3-2010 Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method) 纺织品 非织造布试验方法 第3部分：断裂强力和断裂伸长率的测定（条样法） - 中英文版 |
|
|
|
|
GB/T 25996-2010 Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel 绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法 - 中英文版 |
|
|
|
|
GB/T 24518-2009 Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments 金属和合金的腐蚀 应力腐蚀室外暴露试验方法 - 中英文版 |
|
|
|
|
GB/T 24277-2009 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) 评估部分型式试验成套设备（PTTA）短路耐受强度的一种方法 - 中英文版 |
|
|
|
|
GB/T 23805-2009 Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature 精细陶瓷室温拉伸强度试验方法 - 中英文版 |
|
|
|
|
GB/T 11837-2009 Test methods of the concrete compressive strength of concrete pipes for water 混凝土管用混凝土抗压强度试验方法 - 中英文版 |
|
|
|
|
GB/T 11037-2009 Test method for strength and tightness of marine boiler and pressure vessel 船用锅炉及压力容器强度和密性试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.4-2009 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分：后置式动态试验方法 - 中英文版 |
|
|
|
|
GB/T 18029.8-2008 Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths 轮椅车 第8部分：静态强度,冲击强度及疲劳强度的要求和测试方法 - 中英文版 |
|
|
|
|
GB/T 3903.43-2008 Footwear - Test methods for uppers, lining and insocks - Seam strength 鞋类 帮面、衬里和内垫试验方法 缝合强度 - 中英文版 |
|
|
|
|
GB/T 3903.29-2008 Footwear - Test methods for outsoles - Split tear strength and delamination resistance 鞋类 外底试验方法 剖层撕裂力和层间剥离强度 - 中英文版 |
|
|
|
|
GB/T 14624.2-2008 Test method for colour strength of offset ink 胶印油墨着色力检验方法 - 中英文版 |
|
|
|
|
GB/T 13217.6-2008 Test method for relative tinting strength of liquid ink 液体油墨着色力检验方法 - 中英文版 |
|
|
|
|
GB/T 22640-2008 Test method of C-Ring sample to stress-corrosion cracking for wrought aluminium and aluminium alloys products 铝合金加工产品的环形试样应力腐蚀试验方法 - 中英文版 |
|
|
|
|
GB/T 22638.7-2008 Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength 铝箔试验方法 第7部分：热封强度的测定 - 中英文版 |
|
|
|
|
GB/T 18144-2008 Test method for measurement of stress in glass 玻璃应力测试方法 - 中英文版 |
|
|
|
|
GB/T 14390-2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature 精细陶瓷高温弯曲强度试验方法 - 中英文版 |
|
|
|
|
GB/T 4925-2008 Fishing nets - Method of test for the determination of strength and breaking elongation of netting of synthetic fiber 渔网 合成纤维网片强力与断裂伸长率试验方法 - 中英文版 |
|
|
|
|
GB/T 22307-2008 Standard test method for compressive strength of gaskets at elevated temperatures 密封垫片高温抗压强度试验方法 - 中英文版 |
|
|
|
|
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics - Test for the static flexural strength 压电陶瓷材料性能测试方法 静态弯曲强度的测试 - 中英文版 |
|
|
|
|
GB/T 1842-2008 Plastics - Test method for environmental stress-cracking of polyethylene 塑料 聚乙烯环境应力开裂试验方法 - 中英文版 |
|
|
|
|
GB/T 7121.2-2008 The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分：后置式动态试验方法 - 中英文版 |
|
|
|
|
GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi 电缆和光缆绝缘和护套材料通用试验方法 第42部分：聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增 - 中英文版 |
|
|
|
|
GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl 电缆和光缆绝缘和护套材料通用试验方法 第41部分：聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分 - 中英文版 |
|
|
|
|
GB/T 3903.24-2008 Footwear - Test methods for heels - Heel pin holding strength 鞋类 鞋跟试验方法 持钉力 - 中英文版 |
|
|
|
|
GB/T 3903.23-2008 Footwear - Test methods for heels and top pieces - Top piece retention strength 鞋类 鞋跟和跟面试验方法 跟面结合力 - 中英文版 |
|
|
|
|
GB/T 3903.22-2008 Footwear - Test methods for outsoles - Tensile strength and elongation 鞋类 外底试验方法 抗张强度和伸长率 - 中英文版 |
|
|
|
|
GB/T 3903.21-2008 Footwear - Test methods for accessories:Touch and close fasteners - Shear strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剪切强度 - 中英文版 |
|
|
|
|
GB/T 3903.20-2008 Footwear - Test methods for accessories:Touch and close fasteners - Peel strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剥离强度 - 中英文版 |
|
|
|
|
GB/T 7121.1-2008 The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.3-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3：Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分：后置式静态试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.2-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2：Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分：前置式动态试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.1-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1：Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分：前置式静态试验方法 - 中英文版 |
|
| Find out:196Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-2583-1330
