China Determination of pla GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer 塑料 动态力学性能的测定 第10部分：使用平行平板振荡流变仪测定复数剪切黏度 - 中英文版 |
 |
|
|
|
GB/T 32793-2016 Methods for chemical analysis of nickel sinter and nickel oxide—Determination of nickel, cobalt, copper, iron, zinc, manganese contents—Electrolytic gravimetric method and Inductively coupled plasma atomic emission spectrometric method 烧结镍、氧化镍化学分析方法 镍、钴、铜、铁、锌、锰含量测定 电解重量法-电感耦合等离子体原子发射光谱法 - 中英文版 |
|
|
|
|
GB/T 32794-2016 Pig iron contenting nickel—Determination of nickel，cobalt，chromium，copper，phosphorus content—Inductively coupled plasma atomic emission spectrometry 含镍生铁 镍、钴、铬、铜、磷含量的测定 电感耦合等离子体原子发射光谱法 - 中英文版 |
|
|
|
|
GB/T 5474-2016 Plastics—Phenol formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method 塑料 酚醛模塑制品 游离氨和铵化合物的测定 比色法 - 中英文版 |
|
|
|
|
GB/T 32697-2016 Plastics—Phenol-formaldehyde—Determination of electrical conductivity of resin extracts 塑料 酚醛树脂 萃取液电导率的测定 - 中英文版 |
|
|
|
|
GB/T 7130-2016 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—lodometric method 塑料 酚醛模塑制品 游离酚的测定 碘量法 - 中英文版 |
|
|
|
|
GB/T 32682-2016 Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） - 中英文版 |
|
|
|
|
GB/T 32681-2016 Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度 - 中英文版 |
|
|
|
|
GB/T 32684-2016 Plastic—Phenolic resins—Determination of free formaldehyde content 塑料 酚醛树脂 游离甲醛含量的测定 - 中英文版 |
|
|
|
|
GB/T 32675-2016 Plastics—Phenloic resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料 酚醛树脂 液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定 - 中英文版 |
|
|
|
|
GB/T 32683.1-2016 Plastics—Determination of viscosity using a falling-ball viscometer—Part 1: Inclined-tube method 塑料 用落球黏度计测定黏度 第1部分：斜管法 - 中英文版 |
|
|
|
|
GB/T 32688-2016 Plastics—Phenloic resin powder—Determination of flow distance on a heated glass plate 塑料 酚醛树脂 在加热玻璃板上流动距离的测定 - 中英文版 |
|
|
|
|
GB/T 17421.6-2016 Test code for machine tools—Part 6: Determination of positioning accuracy on body and face diagonals(Diagonal displacement tests) 机床检验通则 第6部分：体和面对角线位置精度的确定（对角线位移检验） - 中英文版 |
|
|
|
|
GB/T 6730.72-2016 Iron ores—Determination of arsenic, chromium, cadmium, lead and mercury content—Inductively coupled plasma-mass spectrometry method (ICP-MS) 铁矿石 砷、铬、镉、铅和汞含量的测定 电感耦合等离子体质谱法（ICP-MS） - 中英文版 |
|
|
|
|
GB/T 5027-2016 Metallic materials—Sheet and strip—Determination of plastic strain ratio 金属材料 薄板和薄带 塑性应变比（r值）的测定 - 中英文版 |
|
|
|
|
GB/T 32548-2016 Steel and iron—Determination of tin, antimony, cerium, lead and bismuth—Inductively coupled plasma mass spectrometric method 钢铁 锡、锑、铈、铅和铋的测定 电感耦合等离子体质谱法 - 中英文版 |
|
|
|
|
GB/T 3767-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 - 中英文版 |
|
|
|
|
GB/T 32524.2-2016 Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 - 中英文版 |
|
|
|
|
GB/T 32477-2016 Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定 - 中英文版 |
|
|
|
|
GB/T 32471-2016 Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定 - 中英文版 |
|
|
|
|
GB/T 12009.5-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidity 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定 - 中英文版 |
|
|
|
|
GB/T 12009.4-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate content 塑料 聚氨酯生产用芳香族异氰酸酯 第4部分：异氰酸根含量的测定 - 中英文版 |
|
|
|
|
GB/T 12009.2-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 2: Determination of hydrolysable chlorine 塑料 聚氨酯生产用芳香族异氰酸酯 第2部分：水解氯的测定 - 中英文版 |
|
|
|
|
GB 23200.38-2016 National food safety standards—Determination of cyclohexanedione herbicides residue in plant-derived foods Liquid chromatography-mass spectrometry 食品安全国家标准 植物源性食品中环己烯酮类除草剂残留量的测定 液相色谱-质谱/质谱法 - 中英文版 |
|
|
|
|
GB 23200.35-2016 National food safety standards—Determination of substituted ureas pesticides residue in plant-derived foods Liquid chromatography-mass spectrometry 食品安全国家标准 植物源性食品中取代脲类农药残留量的测定 液相色谱-质谱法 - 中英文版 |
|
|
|
|
GB/T 32364-2015 Plastics—Phenloic resins—Determination of pH 塑料 酚醛树脂 pH值的测定 - 中英文版 |
|
|
|
|
GB/T 32378-2015 Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 - 中英文版 |
|
|
|
|
GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness 热塑性塑料管材 环刚度的测定 - 中英文版 |
|
|
|
|
GB/T 32363.2-2015 Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 32064-2015 Determination of thermal conductivity and thermal diffusivity of building matertials：transient plane heat sourse method 建筑用材料导热系数和热扩散系数瞬态平面热源测试法 - 中英文版 |
|
|
|
|
GB/T 32106-2015 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production 塑料 在水性培养液中最终厌氧生物分解能力的测定 通过测量生物气体产物的方法 - 中英文版 |
|
|
|
|
GB/T 31927-2015 Zinc and aluminum based coatings on steel sheets and strips—Determination of lead and cadmium contents—Inductively coupled plasma mass spectrometric method 钢板及钢带 锌基和铝基镀层中铅和镉含量的测定 电感耦合等离子体质谱法 - 中英文版 |
|
|
|
|
GB/T 31565-2015 Vitreous ang porcelain enamels—Determination of the edge covering on enamelled steel plate to be used in heat exchangers 热交换器用钢板搪瓷边缘覆盖率的测定 - 中英文版 |
|
|
|
|
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1: At ambient or elevated temperatures 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分：在常温及高温条件下 - 中英文版 |
|
|
|
|
GB/T 30646-2014 Determination of phthalate plasticizers content in coatings―Gas chromatography/mass spectrometry method 涂料中邻苯二甲酸酯含量的测定 气相色谱/质谱联用法 - 中英文版 |
|
|
|
|
GB/T 15256-2014 Rubber, vulcanized or thermoplastic―Determination of low-temperature brittleness（multiple test piece method） 硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法) - 中英文版 |
|
|
|
|
GB/T 11210-2014 Rubber, vulcanized or thermoplastic―Antistatic and conductive products―Determination of electrical resistance 硫化橡胶或热塑性橡胶 抗静电和导电制品 电阻的测定 - 中英文版 |
|
|
|
|
GB/T 7759.2-2014 Rubber,vulcanized or thermoplastic―Determination of compression set―Part 2:At low temperatures 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分：在低温条件下 - 中英文版 |
|
|
|
|
GB/T 31064-2014 Rubber-or plastics-coated fabrics―Determination of puncture resistance 橡胶或塑料涂覆织物 抗刺穿性测试方法 - 中英文版 |
|
|
|
|
GB/T 3884.18-2014 Methods for chemical analysis of copper concentrates―Part 18：Determination of arsenic，antimony，bismuth，lead，zinc，nickel，cadmium，cobalt，magnesium oxide，calcium oxide contents―Inductively coupled plasma atomic emission spectrometry 铜精矿化学分析方法 第18部分：砷、锑、铋、铅、锌、镍、镉、钴、氧化镁、氧化钙量的测定 电感耦合等离子体原子发射光谱法 - 中英文版 |
|
|
|
|
GB/T 14849.4-2014 Methods for chemical analysis of silicon metal―Part 4：Determination of impurity contents―Inductively coupled plasma atomic emission spectrometric method 工业硅化学分析方法 第4部分：杂质元素含量的测定 电感耦合等离子体原子发射光谱法 - 中英文版 |
|
|
|
|
GB 5009.148-2014 National Food Safety Standard-Determination of free gossypol in plant foods 食品安全国家标准 植物性食品中游离棉酚的测定 - 中英文版 |
|
|
|
|
GB/T 31231-2014 Determination of zinc and lead isotopic ratios in aqueous solution―Multiple-collectors inductively coupled plasma mass spectrometry 水中锌、铅同位素丰度比的测定 多接收电感耦合等离子体质谱法 - 中英文版 |
|
|
|
|
GB/T 30987-2014 Determination of free amino acids in plants 植物中游离氨基酸的测定 - 中英文版 |
|
|
|
|
GB/T 3517-2014 Rubber, raw natural―Determination of plasticity retention index (PRI) 天然生胶 塑性保持率（PRI）的测定 - 中英文版 |
|
|
|
|
GB/T 30925-2014 Plastics―Ethylene-vinyl acetate copolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料 乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料 乙酸乙烯酯含量的测定 - 中英文版 |
|
|
|
|
GB/T 30924.2-2014 Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 30903-2014 Inorganic chemicals for industrial use―The determination of impurity element―Inductively coupled plasma mass spectrometry(ICP-MS) 无机化工产品 杂质元素的测定 电感耦合等离子体质谱法(ICP-MS) - 中英文版 |
|
|
|
|
GB/T 30902-2014 Inorganic chemicals for industrial use―The determination of impurity element―Inductively coupled plasma optical emission spectrometry(ICP―OES) 无机化工产品 杂质元素的测定 电感耦合等离子体发射光谱法(ICP-OES) - 中英文版 |
|
|
|
|
GB/T 24148.9-2014 Plastics—Unsaturated polyester resins (UP-R)—Part 9: Determination of overall volume shrinkage 塑料 不饱和聚酯树脂(UP-R） 第9部分：总体积收缩率测定 - 中英文版 |
|
| Find out:977Items | To Page of: First -Previous-Next -Last | [3] [4] [5] [6] [7] [8] [9] |
+86-755-2583-1330
