China Determination of bra GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43818.1-2024 Leather - Determination of abrasion resistance - Part 1: Taber method 皮革-耐磨性能的测定-第1部分：泰伯尔法 - 中英文版 |
 |
|
|
|
GB/T 43722.1-2024 Leather-Determination of antibacterial properties-Part 1: Membrane contact method 皮革-抗菌性能的测定-第1部分：膜接触法 - 中英文版 |
|
|
|
|
GB/T 23538-2023 Ordinary abrasives - Determination method of ball milling toughness 普通磨料 球磨韧性测定方法 - 中英文版 |
|
|
|
|
GB/T 42659-2023 Surface chemical analysis Scanning probe microscopy Determination of geometric quantities using scanning probe microscopy: Calibration of measurement systems 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量：测量系统校准 - 中英文版 |
|
|
|
|
GB/T 33061.7-2023 Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 - 中英文版 |
|
|
|
|
GB/T 33061.6-2023 Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 - 中英文版 |
|
|
|
|
GB/T 33061.5-2023 Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 - 中英文版 |
|
|
|
|
GB/T 33061.4-2023 Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法 - 中英文版 |
|
|
|
|
GB/T 14321-2022 X-ray Quantitative Determination Method of α-Al2O3 Phase in Corundum Abrasive 刚玉磨料中α-Al2O3相X射线定量测定方法 - 中英文版 |
|
|
|
|
GB/T 42122-2022 Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法） - 中英文版 |
|
|
|
|
GB/T 41894.3-2022 Ships and Offshore Technology Determination of Shaft Power in Ship Propulsion Systems by Measuring Shaft Deformation Part 3: Elastic Vibration Method 船舶与海上技术 通过测量轴变形量确定船舶推进系统轴功率 第3部分：弹性振动法 - 中英文版 |
|
|
|
|
GB/T 30314-2021 Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 - 中英文版 |
|
|
|
|
GB/T 26703-2021 Determination of abrasion resistance for top piece of leather shoes 皮鞋跟面耐磨性能试验方法 - 中英文版 |
|
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 中英文版 |
|
|
|
|
GB/T 40797-2021 Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 - 中英文版 |
|
|
|
|
GB/T 39507-2020 Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法 - 中英文版 |
|
|
|
|
GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method 多孔膜孔径的测定 标准粒子法 - 中英文版 |
|
|
|
|
GB/T 38902-2020 Determination of hollow fiber membrane cross-section dimensions—Image analysis method 中空纤维膜丝截面结构尺寸的测定 图像分析法 - 中英文版 |
|
|
|
|
GB/T 2481.2-2020 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits 固结磨具用磨料 粒度组成的检测和标记 第2部分：微粉 - 中英文版 |
|
|
|
|
GB/T 9966.4-2020 Test methods for natural stone--Part 4: Determination of abrasion resistance 天然石材试验方法 第4部分：耐磨性试验 - 中英文版 |
|
|
|
|
GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel 精细陶瓷粉末流动性测定 标准漏斗法 - 中英文版 |
|
|
|
|
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 中英文版 |
|
|
|
|
GB/T 36214.2-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 - 中英文版 |
|
|
|
|
GB/T 11349.1-2018 Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications 机械振动与冲击 机械导纳的试验确定 第1部分：基本术语与定义、传感器特性 - 中英文版 |
|
|
|
|
GB/T 33260.3-2018 Capability of detection—Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used 检出能力 第3部分：无校准数据情形响应变量临界值的确定方法 - 中英文版 |
|
|
|
|
GB/T 22159.5-2017 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法 - 中英文版 |
|
|
|
|
GB/T 34186-2017 Refractory products—Determination of dynamic Young’s modulus(MOE)at elevated temperatures by impulse excitation of vibration 耐火材料 高温动态杨氏模量试验方法(脉冲激振法) - 中英文版 |
|
|
|
|
GB/T 33893-2017 Determination of perfluorooctane sulfonates(PFOS) and perfluorooctanoic acid(PFOA) for separation membranes—Liquid chromatography-tandem mass spectrometry method 分离膜中全氟辛烷磺酰基化合物（PFOS）和全氟辛酸（PFOA）的测定 液相色谱-串联质谱法 - 中英文版 |
|
|
|
|
GB/T 9258.3-2017 Coated abrasives—Grain size analysis—Part 3: Determination of grain size distribution of microgrits P240 to P2500 涂附磨具用磨料 粒度分析 第3部分：微粉P240～P2500粒度组成的测定 - 中英文版 |
|
|
|
|
GB/T 35160.4-2017 Test methods for agglomerated stone—Part 4：Determination of abrasion resistance 合成石材试验方法 第4部分：耐磨性的测定 - 中英文版 |
|
|
|
|
GB/T 3810.7-2016 Test methods of ceramic tiles—Part 7: Determination of resistance to surface abrasion for glazed tiles 陶瓷砖试验方法 第7部分：有釉砖表面耐磨性的测定 - 中英文版 |
|
|
|
|
GB/T 3810.6-2016 Test methods of ceramic tiles—Part 6: Determination of resistance to deep abrasion for unglazed tiles 陶瓷砖试验方法 第6部分：无釉砖耐磨深度的测定 - 中英文版 |
|
|
|
|
GB/T 4854.9-2016 Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 - 中英文版 |
|
|
|
|
GB/T 1689-2014 Rubber vulcanized―Determination of abrasion resistance (Akron machine) 硫化橡胶 耐磨性能的测定（用阿克隆磨耗试验机） - 中英文版 |
|
|
|
|
GB/T 31195-2014 High chloride high ammonia wastewater―Determination of chemical oxygen demand―Chloride ion calibration method 高氯高氨废水 化学需氧量的测定 氯离子校正法 - 中英文版 |
|
|
|
|
GB/T 30758-2014 Refractory products―Determination of dynamic Young’s modulus(MOE) by impulse excitation of vibration 耐火材料 动态杨氏模量试验方法（脉冲激振法） - 中英文版 |
|
|
|
|
GB/T 30314-2013 Rubber-or plastis-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 - 中英文版 |
|
|
|
|
GB/T 12164.3-2013 Reference beta radiations - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence β参考辐射 第3部分：场所和个人剂量仪的校准及其能量响应和角响应的确定 - 中英文版 |
|
|
|
|
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 - 中英文版 |
|
|
|
|
GB/T 22159.2-2012 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分：弹性支撑件平动动刚度的直接测量方法 - 中英文版 |
|
|
|
|
GB/T 18301-2012 Refractory products - Determination of resistance to abrasion at ambient temperature 耐火材料 常温耐磨性试验方法 - 中英文版 |
|
|
|
|
GB/T 19089-2012 Rubber-or plastics-coated fabrics - Determination of abrasion resistance - Martindale method 橡胶或塑料涂覆织物 耐磨性的测定 马丁代尔法 - 中英文版 |
|
|
|
|
GB/T 27628-2011 Inspection of grain and oils - Determination of color and bran speck in wheat flour 粮油检验 小麦粉粉色、麸星的测定 - 中英文版 |
|
|
|
|
GB/T 26703-2011 Determination of abrasion resistance for top piece of leather shoes -Rotation cylindrical drum method 皮鞋跟面耐磨性能试验方法 旋转辊筒式磨耗机法 - 中英文版 |
|
|
|
|
GB/T 1482-2010 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) 金属粉末 流动性的测定 标准漏斗法（霍尔流速计） - 中英文版 |
|
|
|
|
GB/T 24531-2009 Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices 高炉和直接还原用铁矿石 转鼓和耐磨指数的测定 - 中英文版 |
|
|
|
|
GB/T 24241-2009 Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron(HBI) 直接还原铁 热压铁块转鼓和耐磨指数的测定 - 中英文版 |
|
|
|
|
GB/T 23988-2009 Determination for abrasion resistance of - Coatings by falling abrasive 涂料耐磨性测定 落砂法 - 中英文版 |
|
|
|
|
GB/T 2481.2-2009 Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits 固结磨具用磨料 粒度组成的检测和标记 第2部分：微粉 - 中英文版 |
|
|
|
|
GB/T 20316.1-2009 Abrasive grains - Determination of bulk density - Part 1: Macrogrits 普通磨料 堆积密度的测定 第1部分：粗磨粒 - 中英文版 |
|
| Find out:87Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
