China Determination of low GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 44078-2024 Determination of optical center spacing in optoelectronic systems - Low coherence interferometry 光电系统中光学中心间距的测定-低相干干涉测量法 - 中英文版 |
 |
|
|
|
GB/T 6150.3-2023 Methods for chemical analysis of tungsten concentrates Part 3: Determination of phosphorus content Phosphomolybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry 钨精矿化学分析方法 第3部分：磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法 - 中英文版 |
|
|
|
|
GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 - 中英文版 |
|
|
|
|
GB/T 43096-2023 Metal powders. Determination of external specific surface area by powder layer permeability test under steady flow conditions. 金属粉末 稳态流动条件下粉末层透过性试验测定外比表面积 - 中英文版 |
|
|
|
|
GB/T 23961-2023 Determination of low-carbon fatty amine content by gas chromatography 低碳脂肪胺含量的测定 气相色谱法 - 中英文版 |
|
|
|
|
GB/T 35306-2023 Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法 - 中英文版 |
|
|
|
|
GB/T 42483-2023 Determination of thermal conductivity of wood - heat flow method 木材导热系数的测定 热流法 - 中英文版 |
|
|
|
|
GB/T 42487-2023 Soil quality - Determination of soil nitrate nitrogen, nitrite nitrogen and ammonium nitrogen - potassium chloride solution leaching flow analysis method 土壤质量 土壤硝态氮、亚硝态氮和铵态氮的测定 氯化钾溶液浸提流动分析法 - 中英文版 |
|
|
|
|
GB/T 41382-2022 Fire test open calorimeter method determination of heat release rate and combustion products in fire below 40mW 火灾试验 开放式量热计法 40MW以下火灾热释放速率及燃烧产物的测定 - 中英文版 |
|
|
|
|
GB/T 22459.2-2022 Refractory mortars—Part 2：Determination of consistency using the reciprocating flow table method 耐火泥浆 第2部分：稠度试验方法（跳桌法） - 中英文版 |
|
|
|
|
GB/T 41329-2022 Determination of the flowability of metal powders Standard funnel method (Gustafsson flowmeter) 金属粉末流动性的测定 标准漏斗法（古斯塔弗森流速计） - 中英文版 |
|
|
|
|
GB/T 1482-2022 Metal powders - Determination of fluidity - Standard funnel method (Hall flow meter) 金属粉末 流动性的测定 标准漏斗法（霍尔流速计） - 中英文版 |
|
|
|
|
GB/T 11603-2022 Method for determination of average wool fiber diameter - airflow method 羊毛纤维平均直径测定法 气流法 - 中英文版 |
|
|
|
|
GB/T 42162-2022 Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method 生橡胶 毛细管气相色谱测定残留单体和其他挥发性低分子量化合物 热脱附（动态顶空）法 - 中英文版 |
|
|
|
|
GB/T 37211.3-2022 Methods for chemical analysis of germanium metal - Part 3: Determination of trace impurity elements - Glow discharge mass spectrometry 金属锗化学分析方法 第3部分:痕量杂质元素的测定 辉光放电质谱法 - 中英文版 |
|
|
|
|
GB/T 41793-2022 Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing 人造革合成革试验方法 潜在酚黄变的测定 - 中英文版 |
|
|
|
|
GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定 - 中英文版 |
|
|
|
|
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定 - 中英文版 |
|
|
|
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 中英文版 |
|
|
|
|
GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 - 中英文版 |
|
|
|
|
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 - 中英文版 |
|
|
|
|
GB/T 40919-2021 Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth 管道系统用聚乙烯材料 与慢速裂纹增长相关的应变硬化模量的测定 - 中英文版 |
|
|
|
|
GB/T 38902-2020 Determination of hollow fiber membrane cross-section dimensions—Image analysis method 中空纤维膜丝截面结构尺寸的测定 图像分析法 - 中英文版 |
|
|
|
|
GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer 微束分析 钢中低含量硅、锰的电子探针定量分析方法 - 中英文版 |
|
|
|
|
GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 - 中英文版 |
|
|
|
|
GB/T 14513.3-2020 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems 气动 使用可压缩流体元件的流量特性测定 第 3 部分：系统稳态流量特性的计算方法 - 中英文版 |
|
|
|
|
GB/T 38516-2020 Permeable sintered metal materials—Determination of average pore size of medium flow 可渗透性烧结金属材料 中流量平均孔径的测定 - 中英文版 |
|
|
|
|
GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) 硫化橡胶 低温性能的测定 温度回缩程序（TR 试验） - 中英文版 |
|
|
|
|
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） - 中英文版 |
|
|
|
|
GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel 精细陶瓷粉末流动性测定 标准漏斗法 - 中英文版 |
|
|
|
|
GB/T 24981.2-2020 Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness 稀土长余辉荧光粉试验方法 第2部分：余辉亮度的测定 - 中英文版 |
|
|
|
|
GB/T 24981.1-2020 Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates 稀土长余辉荧光粉试验方法 第1部分：发射主峰和色品坐标的测定 - 中英文版 |
|
|
|
|
GB/T 38481-2020 Determination of ultralow-frequency mutations for microorganisms—Duplex sequencing 微生物超低频突变测定 双重测序法 - 中英文版 |
|
|
|
|
GB/T 38385-2019 Determination of disperse yellow 23 and disperse orange 149 dyes in dye products 染料产品中分散黄23和分散橙149染料的测定 - 中英文版 |
|
|
|
|
GB/T 37829-2019 Iron ore fines in bulk—Determination of transportable moisture limits—Flow-table method 散装铁矿粉 适运水分限量的测定 流盘试验法 - 中英文版 |
|
|
|
|
GB/T 18476-2019 Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） - 中英文版 |
|
|
|
|
GB/T 17633-2019 Geotextiles and geotextile-related products－Determination of water flow capacity in their plane 土工布及其有关产品 平面内水流量的测定 - 中英文版 |
|
|
|
|
GB/T 37222-2018 Determination of spray flame persistence of fire-resistant fluids—Hollow-cone nozzle method 难燃液压液喷射燃烧持久性测定-空锥射流喷嘴试验法 - 中英文版 |
|
|
|
|
GB/T 36899-2018 Fluorescent whitening agents—Determination of yellow spots 荧光增白剂-泛黄点的测定 - 中英文版 |
|
|
|
|
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 - 中英文版 |
|
|
|
|
GB/T 36590-2018 Method for chemical analysis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry 高纯银化学分析方法 痕量杂质元素的测定 辉光放电质谱法 - 中英文版 |
|
|
|
|
GB/T 35881-2018 Inspection of grain and oils—Determination of yellow-colored kernelof paddy—Image analysis method 粮油检验 稻谷黄粒米含量测定 图像分析法 - 中英文版 |
|
|
|
|
GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 - 中英文版 |
|
|
|
|
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法 - 中英文版 |
|
|
|
|
GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment 林业生物质原料分析方法 预处理后不溶固体含量测定 - 中英文版 |
|
|
|
|
GB/T 36079-2018 Acoustics—Procedures for determination of transmission loss, flow noise and total pressure loss coefficient for arrayed element dissipative silencers—Equivalent measurement 声学 单元并排式阻性消声器传声损失、气流再生噪声和全压损失系数的测定 等效法 - 中英文版 |
|
|
|
|
GB/T 22159.5-2017 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法 - 中英文版 |
|
|
|
|
GB/T 34209-2017 Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry 不锈钢 多元素含量的测定 辉光放电原子发射光谱法 - 中英文版 |
|
|
|
|
GB/T 33788-2017 Reactive dyes—Determination of shade and relative strength—Low salt dyeing method 反应染料 色光和强度的测定 低盐染色法 - 中英文版 |
|
|
|
|
GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动 使用可压缩流体元件的流量特性测定 第1部分：稳态流动的一般规则和试验方法 - 中英文版 |
|
| Find out:138Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
