China Geometrical Product GB Standards Search Result |
![]() |
1. Ready translated GB standards
![]() 2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
![]() |
GB/T 18779.2-2023 Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分:GPS测量、测量设备校准和产品验证中的测量不确定度评估指南 - 中英文版 |
![]() |
|
![]() |
GB/T 6445-2021 Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, Geometrical Product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范(GPS)和公差值 - 中英文版 |
![]() |
|
![]() |
GB/T 20882.4-2021 Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, Geometrical Product specifications (GPS) and tolerance values 淀粉糖质量要求 第4部分:果葡糖浆 - 中英文版 |
![]() |
|
![]() |
GB/T 40742.5-2021 Geometrical Product specifications (GPS)—Geometrical precisionverification—Part 5:Estimation of uncertainty of measurement for geometrical characteristics verification 产品几何技术规范(GPS) 几何精度的检测与验证 第5部分:几何特征检测与验证中测量不确定度的评估 - 中英文版 |
![]() |
|
![]() |
GB/T 40810.2-2021 Geometrical Product specifications (GPS)—Online measurement in process—Part 2:Online verifications of geometric features(form and position) 产品几何技术规范(GPS) 生产过程在线测量 第2部分:几何特征(形位)的在线检测与验证 - 中英文版 |
![]() |
|
![]() |
GB/T 40810.1-2021 Geometrical Product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture) 产品几何技术规范(GPS) 生产过程在线测量 第1部分:几何特征(尺寸、表面结构)的在线检测与验证 - 中英文版 |
![]() |
|
![]() |
GB/T 40742.4-2021 Geometrical Product specifications (GPS)—Geometrical precision verification—Part 4:Evaluation of dimension and geometrical error,discriminant pattern of minimum zone 产品几何技术规范(GPS) 几何精度的检测与验证 第4部分:尺寸和几何误差评定、最小区域的判别模式 - 中英文版 |
![]() |
|
![]() |
GB/T 40742.3-2021 Geometrical Product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maximum material requirements and minimum material requirements 产品几何技术规范(GPS) 几何精度的检测与验证 第3部分:功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 - 中英文版 |
![]() |
|
![]() |
GB/T 40742.2-2021 Geometrical Product specifications (GPS)—Geometrical precision verification—Part 2:Verification of form characteristics, orientation characteristics, position characteristics, run-out characteristics and profile characteristics 产品几何技术规范(GPS) 几何精度的检测与验证 第2部分:形状、方向、位置、跳动和轮廓度特征的检测与验证 - 中英文版 |
![]() |
|
![]() |
GB/T 40742.1-2021 Geometrical Product specifications (GPS)—Geometrical precision verification—Part 1:Basic concept and measurement—Symbol,terminology,measuring conditions and procedures 产品几何技术规范(GPS) 几何精度的检测与验证 第1部分:基本概念和测量基础 符号、术语、测量条件和程序 - 中英文版 |
![]() |
|
![]() |
GB/T 39518-2020 Geometrical Product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 产品几何技术规范(GPS) 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南 - 中英文版 |
![]() |
|
![]() |
GB/T 38761-2020 Geometrical Product specifications (GPS)—Characteristics and conditions—Definitions 产品几何技术规范(GPS) 特征和条件 定义 - 中英文版 |
![]() |
|
![]() |
GB/T 38762.3-2020 Geometrical Product specifications (GPS)—Dimensional tolerancing—Part 3: Angular sizes 产品几何技术规范(GPS) 尺寸公差 第3部分:角度尺寸 - 中英文版 |
![]() |
|
![]() |
GB/T 38762.1-2020 Geometrical Product specifications (GPS)—Dimensional tolerancing—Part 1: Linear sizes 产品几何技术规范(GPS) 尺寸公差 第1部分:线性尺寸 - 中英文版 |
![]() |
|
![]() |
GB/T 38762.2-2020 Geometrical Product specifications (GPS)—Dimensional tolerancing—Part 2: Dimensions other than linear or angular sizes 产品几何技术规范(GPS) 尺寸公差 第2部分:除线性、角度尺寸外的尺寸 - 中英文版 |
![]() |
|
![]() |
GB/T 38760-2020 Geometrical Product specifications (GPS)—Features utilized in specification and verification 产品几何技术规范(GPS) 规范和检验中使用的要素 - 中英文版 |
![]() |
|
![]() |
GB/T 34874.6-2020 Geometrical Product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces 产品几何技术规范(GPS) X射线三维尺寸测量机 第6部分:工件的检测方法 - 中英文版 |
![]() |
|
![]() |
GB/T 24637.4-2020 Geometrical Product specifications(GPS)—General concepts—Part 4: Geometrical characteristics for quantifying GPS deviations 产品几何技术规范(GPS) 通用概念 第4部分:几何特征的GPS偏差量化 - 中英文版 |
![]() |
|
![]() |
GB/T 24637.3-2020 Geometrical Product specifications (GPS)—General concepts—Part 3: Toleranced features 产品几何技术规范(GPS) 通用概念 第3部分:被测要素 - 中英文版 |
![]() |
|
![]() |
GB/T 24637.2-2020 Geometrical Product specifications (GPS)—General concepts—Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities 产品几何技术规范(GPS) 通用概念 第2部分:基本原则、规范、操作集和不确定度 - 中英文版 |
![]() |
|
![]() |
GB/T 24637.1-2020 Geometrical Product specifications (GPS)—General concepts—Part 1: Model for geometrical specification and verification 产品几何技术规范(GPS) 通用概念 第1部分:几何规范和检验的模型 - 中英文版 |
![]() |
|
![]() |
GB/T 20308-2020 Geometrical Product specifications(GPS)—Matrix model 产品几何技术规范(GPS) 矩阵模型 - 中英文版 |
![]() |
|
![]() |
GB/T 13319-2020 Geometrical Product specifications (GPS)—Geometrical tolerancing—Pattern and combined geometrical specification 产品几何技术规范(GPS) 几何公差 成组(要素)与组合几何规范 - 中英文版 |
![]() |
|
![]() |
GB/T 1800.2-2020 Geometrical Product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts 产品几何技术规范(GPS) 线性尺寸公差ISO代号体系 第2部分:标准公差带代号和孔、轴的极限偏差表 - 中英文版 |
![]() |
|
![]() |
GB/T 1800.1-2020 Geometrical Product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits 产品几何技术规范(GPS) 线性尺寸公差ISO代号体系 第1部分:公差、偏差和配合的基础 - 中英文版 |
![]() |
|
![]() |
GB/T 16857.901-2020 Geometrical Product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第901部分:配置多影像探测系统的坐标测量机 - 中英文版 |
![]() |
|
![]() |
GB/T 39643-2020 Geometrical Product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences 产品几何技术规范(GPS) 长度测量中温度影响引入的系统误差和测量不确定度来源 - 中英文版 |
![]() |
|
![]() |
GB/T 33523.71-2020 Geometrical Product specifications (GPS)—Surface texture: Areal—Part 71: Software measurement standards 产品几何技术规范(GPS) 表面结构 区域法 第71部分:软件测量标准 - 中英文版 |
![]() |
|
![]() |
GB/T 33523.70-2020 Geometrical Product specifications (GPS)—Surface texture: Areal—Part 70: Material measures 产品几何技术规范(GPS) 表面结构 区域法 第70部分:实物测量标准 - 中英文版 |
![]() |
|
![]() |
GB/T 33523.1-2020 Geometrical Product specifications (GPS)—Surface texture: Areal—Part 1: Indication of surface texture 产品几何技术规范(GPS) 表面结构 区域法 第1部分:表面结构的表示法 - 中英文版 |
![]() |
|
![]() |
GB/T 18779.6-2020 Geometrical Product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces 产品几何技术规范(GPS) 工件与测量设备的测量检验 第6部分:仪器和工件接受/拒收的通用判定规则 - 中英文版 |
![]() |
|
![]() |
GB/T 18779.5-2020 Geometrical Product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范(GPS) 工件与测量设备的测量检验 第5部分:指示式测量仪器的检验不确定度 - 中英文版 |
![]() |
|
![]() |
GB/T 18779.4-2020 Geometrical Product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules 产品几何技术规范(GPS) 工件与测量设备的测量检验 第4部分:判定规则中功能限与规范限的基础 - 中英文版 |
![]() |
|
![]() |
GB/T 26958.28-2020 Geometrical Product specifications (GPS)—Filtration—Part 28: Profile filters:End effects 产品几何技术规范(GPS) 滤波 第28部分: 轮廓滤波器 端部效应 - 中英文版 |
![]() |
|
![]() |
GB/T 26958.21-2020 Geometrical Product specifications (GPS)—Filtration—Part 21: Linear profile filters: Gaussian filters 产品几何技术规范(GPS) 滤波 第21部分:线性轮廓滤波器 高斯滤波器 - 中英文版 |
![]() |
|
![]() |
GB/T 24635.4-2020 Geometrical Product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第4部分:应用仿真技术评估特定任务的测量不确定度 - 中英文版 |
![]() |
|
![]() |
GB/T 24635.1-2020 Geometrical Product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第1部分:概要和计量特性 - 中英文版 |
![]() |
|
![]() |
GB/T 5801-2020 Rolling bearings—Needle roller bearings with machined rings—Boundary dimensions, Geometrical Product specifications (GPS) and tolerance values 滚动轴承 机制套圈滚针轴承 外形尺寸、产品几何技术规范(GPS)和公差值 - 中英文版 |
![]() |
|
![]() |
GB/T 38368-2019 Geometrical Product specifications (GPS)—Requirements of digital model-based measurement 产品几何技术规范(GPS) 基于数字化模型的测量通用要求 - 中英文版 |
![]() |
|
![]() |
GB/T 4249-2018 Geometrical Product specifications(GPS)—Fundamentals—Concepts, principles and rules 产品几何技术规范(GPS) 基础 概念、原则和规则 - 中英文版 |
![]() |
|
![]() |
GB/T 17852-2018 Geometrical Product specifications(GPS)—Geometrical tolerancing—Profile tolerancing 产品几何技术规范(GPS) 几何公差 轮廓度公差标注 - 中英文版 |
![]() |
|
![]() |
GB/T 16671-2018 Geometrical Product specifications (GPS)—Geometrical tolerancing—Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) 产品几何技术规范(GPS) 几何公差 最大实体要求(MMR)、最小实体要求(LMR)和可逆要求(RPR) - 中英文版 |
![]() |
|
![]() |
GB/T 1182-2018 Geometrical Product specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out 产品几何技术规范(GPS) 几何公差 形状、方向、位置和跳动公差标注 - 中英文版 |
![]() |
|
![]() |
GB/T 34874.3-2017 Geometrical Product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3:Acceptance and reverification tests 产品几何技术规范(GPS) X射线三维尺寸测量机 第3部分:验收检测和复检检测 - 中英文版 |
![]() |
|
![]() |
GB/T 16857.2-2017 Geometrical Product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机 - 中英文版 |
![]() |
|
![]() |
GB/T 34879-2017 Geometrical Product specifications (GPS)—Metrological characteristics and guide to uncertainty of measurement for optical confocal microscopes 产品几何技术规范(GPS) 光学共焦显微镜计量特性及测量不确定度评定导则 - 中英文版 |
![]() |
|
![]() |
GB/T 1958-2017 Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification 产品几何技术规范(GPS) 几何公差 检测与验证 - 中英文版 |
![]() |
|
![]() |
GB/T 34881-2017 Geometrical Product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty 产品几何技术规范(GPS) 坐标测量机的检测不确定度评估指南 - 中英文版 |
![]() |
|
![]() |
GB/T 34890-2017 Geometrical Product specification(GPS)—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system 产品几何技术规范(GPS) 数字摄影三坐标测量系统的验收检测和复检检测 - 中英文版 |
![]() |
|
![]() |
GB/T 307.1-2017 Rolling bearings—Radial bearings—Geometrical Product specifications (GPS) and tolerance values 滚动轴承 向心轴承 产品几何技术规范(GPS)和公差值 - 中英文版 |
![]() |
Find out:142Items | To Page of: First -Previous-Next -Last | 1 2 3 |