China Test method for fibe GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43938.1-2024 Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 - 中英文版 |
 |
|
|
|
GB/T 43938.2-2024 Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 - 中英文版 |
|
|
|
|
GB/T 6498-2024 Test Method for Micronaire of Cotton Fiber 棉纤维马克隆值试验方法 - 中英文版 |
|
|
|
|
GB/T 13777-2024 Test Method for Maturity of Cotton Fiber-Microscopy 棉纤维成熟度试验方法-显微镜法 - 中英文版 |
|
|
|
|
GB/T 43811-2024 Test methods for short fiber content of fiber products for wadding 絮用纤维制品短纤维含量测试方法 - 中英文版 |
|
|
|
|
GB/T 43418-2023 Method for testing the composition of flax fiber 亚麻纤维组成成分的检测方法 - 中英文版 |
|
|
|
|
GB/T 15231-2023 Test methods for properties of glass fiber reinforced cement 玻璃纤维增强水泥性能试验方法 - 中英文版 |
|
|
|
|
GB/T 41312.2-2023 Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 - 中英文版 |
|
|
|
|
GB/T 43015-2023 Synthetic fibers - Test method for dry heat shrinkage of short fibers 合成纤维 短纤维干热收缩率试验方法 - 中英文版 |
|
|
|
|
GB/T 1458-2023 Test method for mechanical properties of fiber-wound reinforced composite ring specimens 纤维缠绕增强复合材料环形试样力学性能试验方法 - 中英文版 |
|
|
|
|
GB/T 42655-2023 Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 - 中英文版 |
|
|
|
|
GB/T 42870-2023 Non-destructive testing Acoustic emission testing methods and evaluation criteria for fiber-reinforced polymers 无损检测 纤维增强聚合物的声发射检测方法和评价准则 - 中英文版 |
|
|
|
|
GB/T 14344-2022 Test method for tensile properties of chemical fiber filaments 化学纤维 长丝拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 14338-2022 Test method for crimp properties of chemical staple fibers 化学纤维 短纤维卷曲性能试验方法 - 中英文版 |
|
|
|
|
GB/T 14337-2022 Test method for tensile properties of chemical staple fibers 化学纤维 短纤维拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 41498-2022 Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法 - 中英文版 |
|
|
|
|
GB/T 41690-2022 Quantitative test method for foreign fibers in raw cotton - manual method 原棉异性纤维定量试验方法 手工法 - 中英文版 |
|
|
|
|
GB/T 21239-2022 Test method for compressive properties of fiber reinforced plastic laminates after impact 纤维增强塑料层合板冲击后压缩性能试验方法 - 中英文版 |
|
|
|
|
GB/T 41738-2022 Test method for mode I interlaminar fracture toughness (GIC) of fiber metal laminates 纤维金属层板I型层间断裂韧性（GIC）试验方法 - 中英文版 |
|
|
|
|
GB/T 40271-2021 Test method for identification of textile fibers—Differential scanningcalorimetry(DSC) 纺织纤维鉴别试验方法 差示扫描量热法（DSC） - 中英文版 |
|
|
|
|
GB/T 19216.3-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.2-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.1-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 41061-2021 Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 - 中英文版 |
|
|
|
|
GB/T 39026-2020 Test method for the identification of recycled polyethylene terephthalate (PET) fiber 循环再利用聚酯（PET）纤维鉴别方法 - 中英文版 |
|
|
|
|
GB/T 38537-2020 Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 - 中英文版 |
|
|
|
|
GB/T 38535-2020 Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT) 纤维增强树脂基复合材料工业计算机层析成像（CT）检测方法 - 中英文版 |
|
|
|
|
GB/T 3362-2017/XG1-2020 Test methods for tensile properties of carbon fiber multifilament 《碳纤维复丝拉伸性能试验方法》国家标准第1号修改单 - 中英文版 |
|
|
|
|
GB/T 39490-2020 Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 - 中英文版 |
|
|
|
|
GB/T 22798-2019 Test method for fiber shedding of towel products 毛巾产品脱毛测试方法 - 中英文版 |
|
|
|
|
GB/T 37632-2019 Man-made fiber—Test method for titanium dioxide content 化学纤维 二氧化钛含量试验方法 - 中英文版 |
|
|
|
|
GB/T 37631-2019 Man-made fiber—Test method for thermal decomposition temperature 化学纤维 热分解温度试验方法 - 中英文版 |
|
|
|
|
GB/T 36264-2018 Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment 超高温氧化环境下纤维复合材料拉伸强度试验方法 - 中英文版 |
|
|
|
|
GB/T 36137-2018 Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module 中空纤维超滤膜和微滤膜组件完整性检验方法 - 中英文版 |
|
|
|
|
GB/T 36422-2018 Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method 化学纤维 微观形貌及直径的测定 扫描电镜法 - 中英文版 |
|
|
|
|
GB/T 35931-2018 Test method for neps and short fiber content of cotton fibers—Photoelectric analyser 棉纤维棉结和短纤维率测试方法 光电法 - 中英文版 |
|
|
|
|
GB/T 16258-2018 Test method for sugar in cotton fibers—Spectrophotometry 棉纤维含糖试验方法 分光光度法 - 中英文版 |
|
|
|
|
GB/T 35843-2018 Test method of fiber content of fiber reinforced concrete and its product 纤维增强混凝土及其制品的纤维含量试验方法 - 中英文版 |
|
|
|
|
GB/T 34520.2-2017 Test methods for continuous silicon carbide fiber—Part 2：Diameter of single-filament fiber 连续碳化硅纤维测试方法 第2部分：单纤维直径 - 中英文版 |
|
|
|
|
GB/T 34520.1-2017 Test methods for continuous silicon carbide fiber—Part 1：Size content of filament yarn 连续碳化硅纤维测试方法 第1部分：束丝上浆率 - 中英文版 |
|
|
|
|
GB/T 34520.5-2017 Test methods for continuous silicon carbide fiber—Part 5：Tensile properties of single-filament fiber 连续碳化硅纤维测试方法 第5部分：单纤维拉伸性能 - 中英文版 |
|
|
|
|
GB/T 34520.4-2017 Test methods for continuous silicon carbide fiber—Part 4：Tensile properties of filament yarn 连续碳化硅纤维测试方法 第4部分：束丝拉伸性能 - 中英文版 |
|
|
|
|
GB/T 34520.3-2017 Test methods for continuous silicon carbide fiber—Part 3：Linear density and density 连续碳化硅纤维测试方法 第3部分：线密度和密度 - 中英文版 |
|
|
|
|
GB/T 34520.6-2017 Test methods for continuous silicon carbide fiber－Part 6：Resistivity 连续碳化硅纤维测试方法 第6部分：电阻率 - 中英文版 |
|
|
|
|
GB/T 34520.7-2017 Test methods for continuous silicon carbide fiber—Part 7 ：High temperature strength retention rate 连续碳化硅纤维测试方法 第7部分：高温强度保留率 - 中英文版 |
|
|
|
|
GB/T 34551-2017 Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 - 中英文版 |
|
|
|
|
GB/T 3362-2017 Test methods for tensile properties of carbon fiber multifilament 碳纤维复丝拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 3857-2017 Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 - 中英文版 |
|
|
|
|
GB/T 35378-2017 Testing methods for tensile mechanical properties of plant short individual fibers 植物单根短纤维拉伸力学性能测试方法 - 中英文版 |
|
|
|
|
GB/T 6505-2017 Man-made fiber—Test method for thermal shrinkage of filament yarns（after treatment） 化学纤维 长丝热收缩率试验方法（处理后） - 中英文版 |
|
| Find out:96Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
