China Test method for line GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43881-2024 Test method for thermal expansion coefficient of low expansion glass line - laser interferometry 低膨胀玻璃线热膨胀系数试验方法-激光干涉法 - 中英文版 |
 |
|
|
|
GB/T 5169.34-2023 Fire hazard tests for electrical and electronic products Part 34: Guidelines for fire hazard assessment Ignitability Summary and relevance of test methods 电工电子产品着火危险试验 第34部分：着火危险评定导则 起燃性 试验方法概要和相关性 - 中英文版 |
|
|
|
|
GB/T 42610-2023 Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder 高压氢气瓶塑料内胆和氢气相容性试验方法 - 中英文版 |
|
|
|
|
GB/T 2423.24-2022 Environmental testing - Part 2: Test methods - Test S: Simulation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests 环境试验 第2部分：试验方法 试验S：模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则 - 中英文版 |
|
|
|
|
GB/T 41600-2022 Test method for straight-line running stability of automobiles 汽车直线行驶稳定性试验方法 - 中英文版 |
|
|
|
|
GB/T 41408-2022 Sensory analysis methodology - General guidelines for testing consumer preferences in controlled areas 感官分析 方法学 受控区域消费者喜好测试一般导则 - 中英文版 |
|
|
|
|
GB/T 7994.3-2022 Test methods for glass-lined equipment - Part 3: Mechanical shock resistance gunshot test 搪玻璃设备试验方法 第3部分：耐机械冲击枪击试验 - 中英文版 |
|
|
|
|
GB/T 41755-2022 Cracking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法 - 中英文版 |
|
|
|
|
GB/T 41760-2022 Test method for spontaneous polarization performance of tourmaline 电气石自发极化性能测试方法 - 中英文版 |
|
|
|
|
GB/T 40467-2021 Livestock and poultry meat quality testing—Guideline for near-infrared spectroscopy method 畜禽肉品质检测 近红外法通则 - 中英文版 |
|
|
|
|
GB/T 1551-2021 Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method 硅单晶电阻率的测定 直排四探针法和直流两探针法 - 中英文版 |
|
|
|
|
GB/T 9966.16-2021 Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient 天然石材试验方法 第16部分：线性热膨胀系数的测定 - 中英文版 |
|
|
|
|
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 中英文版 |
|
|
|
|
GB/T 5095.2304-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain 电子设备用机电元件 基本试验规程及测量方法 第23-4部分：屏蔽和滤波试验 试验23d：时域内传输线的反射 - 中英文版 |
|
|
|
|
GB/T 5095.2303-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 - 中英文版 |
|
|
|
|
GB/T 1001.1-2021 Insulators for overhead lines with a nominal voltage above 1 000V—Part 1:Ceramic or glass insulator units for a.c.systems—Definitions,test methods and acceptance criteria 标称电压高于1 000V的架空线路绝缘子 第1部分：交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则 - 中英文版 |
|
|
|
|
GB/T 38786-2020 Testing method for cleanliness of magnesium and magnesium alloy ingots 镁及镁合金铸锭纯净度检验方法 - 中英文版 |
|
|
|
|
GB/T 23711.8-2019 Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 - 中英文版 |
|
|
|
|
GB/T 23711.7-2019 Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 - 中英文版 |
|
|
|
|
GB/T 23711.6-2019 Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 - 中英文版 |
|
|
|
|
GB/T 23711.5-2019 Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 - 中英文版 |
|
|
|
|
GB/T 23711.4-2019 Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 - 中英文版 |
|
|
|
|
GB/T 23711.3-2019 Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 - 中英文版 |
|
|
|
|
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 - 中英文版 |
|
|
|
|
GB/T 23711.1-2019 Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 - 中英文版 |
|
|
|
|
GB/T 23711.7-2019 Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 - 中英文版 |
|
|
|
|
GB/T 23711.6-2019 Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 - 中英文版 |
|
|
|
|
GB/T 23711.5-2019 Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 - 中英文版 |
|
|
|
|
GB/T 23711.4-2019 Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 - 中英文版 |
|
|
|
|
GB/T 23711.3-2019 Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 - 中英文版 |
|
|
|
|
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 - 中英文版 |
|
|
|
|
GB/T 37322-2019 Test method for evaluating gasoline cleanliness—Simulation test of intake valve deposit (IVD) of gasoline engine 汽油清净性评价 汽油机进气阀沉积物模拟试验法 - 中英文版 |
|
|
|
|
GB/T 37240-2018 Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module 晶体硅光伏组件盖板玻璃透光性能测试评价方法 - 中英文版 |
|
|
|
|
GB/T 4059-2018 Test method for phosphorus content in polycrystalline silicon by zone-melting method under controlled atmosphere 硅多晶气氛区熔基磷检验方法 - 中英文版 |
|
|
|
|
GB/T 35090-2018 Non-destructive testing—Test method for weak magnetic testing of pipeline 无损检测 管道弱磁检测方法 - 中英文版 |
|
|
|
|
GB/T 36159-2018 Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择 - 中英文版 |
|
|
|
|
GB/T 36655-2018 Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method 电子封装用球形二氧化硅微粉中α态晶体二氧化硅含量的测试方法 XRD法 - 中英文版 |
|
|
|
|
GB/T 4060-2018 Test method for boron content in polycrystalline silicon by vacuum zone-melting method 硅多晶真空区熔基硼检验方法 - 中英文版 |
|
|
|
|
GB/T 34898-2017 Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element 微机电系统（MEMS）技术 MEMS谐振敏感元件非线性振动测试方法 - 中英文版 |
|
|
|
|
GB/T 19443-2017 Insulators for overhead lines with a nominal voltage above 1500V—Ceramic or glass insulator units for d.c. systems—Definitions,test methods and acceptance criteria 标称电压高于1500V的架空线路用绝缘子 直流系统用瓷或玻璃绝缘子串元件 定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 34937-2017 Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 34520.3-2017 Test methods for continuous silicon carbide fiber—Part 3：Linear density and density 连续碳化硅纤维测试方法 第3部分：线密度和密度 - 中英文版 |
|
|
|
|
GB/T 34481-2017 Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices 低位错密度锗单晶片腐蚀坑密度(EPD)的测量方法 - 中英文版 |
|
|
|
|
GB/T 33648-2017 Test method for identification and determination of specific non-regular additives in motor gasoline—Infrared spectroscopic method 车用汽油中典型非常规添加物的识别与测定 红外光谱法 - 中英文版 |
|
|
|
|
GB/T 33624-2017 Rolling bearings—Test and assessment methods for cleanliness 滚动轴承 清洁度测量及评定方法 - 中英文版 |
|
|
|
|
GB/T 35472.2-2017 Test method for friction element of wet automatic transmission—Part 2: SZBL type friction test machine guidelines 湿式自动变速箱摩擦元件试验方法 第2部分：SZBL型摩擦试验机使用指南 - 中英文版 |
|
|
|
|
GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data 聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析 - 中英文版 |
|
|
|
|
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports 化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法 - 中英文版 |
|
|
|
|
GB/T 33014.5-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 5: Stripline 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第5部分：带状线法 - 中英文版 |
|
|
|
|
GB/T 33014.2-2016 Road vehicles—Component test methods for electrical /electronic disturbances from narrowband radiated electromagnetic energy—Part 2: Absorber-lined shielded enclosure 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第2部分：电波暗室法 - 中英文版 |
|
| Find out:118Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
