China Test method for low GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 44126.2-2024 Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 - 中英文版 |
 |
|
|
|
GB/T 18802.331-2024 Low voltage surge protector components - Part 331: Performance requirements and test methods for metal oxide varistors (MOVs) 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 43873-2024 Test method for upper and lower limit temperature of ultra-thin glass annealing 超薄玻璃退火上下限温度试验方法 - 中英文版 |
|
|
|
|
GB/T 43881-2024 Test method for thermal expansion coefficient of low expansion glass line - laser interferometry 低膨胀玻璃线热膨胀系数试验方法-激光干涉法 - 中英文版 |
|
|
|
|
GB/T 43891-2024 Non-metallic chemical equipment - Test method for heat transfer coefficient and flow resistance performance of impermeable graphite heat exchangers 非金属化工设备-不透性石墨换热器传热系数和流阻性能测试方法 - 中英文版 |
|
|
|
|
GB/T 43823-2024 Textiles - Test method for luminous afterglow performance - Luminance meter method 纺织品-抗病毒活性的测定 - 中英文版 |
|
|
|
|
GB/T 43255-2023 Test method for low temperature cold starting performance of fuel cell electric vehicles 燃料电池电动汽车低温冷起动性能试验方法 - 中英文版 |
|
|
|
|
GB/T 41664-2022 Evaluation methods and test rules for low NOx fuel gas burners 低NOx燃油燃气燃烧器评价方法与试验规则 - 中英文版 |
|
|
|
|
GB/T 24581-2022 Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low temperature FT-IR analysis method 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法 - 中英文版 |
|
|
|
|
GB/T 42170-2022 Footwear - Test methods for hollow and solid heels with heels - Heel adhesion 鞋类 带跟面的空心和实心鞋跟试验方法 跟面结合力 - 中英文版 |
|
|
|
|
GB/T 12085.23-2022 Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 - 中英文版 |
|
|
|
|
GB/T 41793-2022 Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing 人造革合成革试验方法 潜在酚黄变的测定 - 中英文版 |
|
|
|
|
GB/T 20081.3-2021 Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 - 中英文版 |
|
|
|
|
GB/T 40286-2021 The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization 低温双循环余热回收利用装置性能测试方法 - 中英文版 |
|
|
|
|
GB/T 8243.12-2021 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：颗粒计数法滤清效率和容灰量 - 中英文版 |
|
|
|
|
GB/T 39933-2021 Rotational moulding—Test method for low temperature impact 滚塑成型 低温冲击试验 - 中英文版 |
|
|
|
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 中英文版 |
|
|
|
|
GB/T 40934-2021 Rotational moulding. Test method for powder flowability 滚塑成型 粉末流动性的试验方法 - 中英文版 |
|
|
|
|
GB/T 38924.2-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test 民用轻小型无人机系统环境试验方法 第2部分: 低温试验 - 中英文版 |
|
|
|
|
GB/T 38796-2020 Performance requirements and test methods of automobile blow-out emergency safety device 汽车爆胎应急安全装置性能要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 - 中英文版 |
|
|
|
|
GB/T 38712-2020 Test method for thermal conductivity of ultrathin glass—Heat flow method 超薄玻璃导热系数试验方法 热流法 - 中英文版 |
|
|
|
|
GB/T 8243.14-2020 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 - 中英文版 |
|
|
|
|
GB/T 38534-2020 Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 39269-2020 Voltage dip and short interruption—Immunity testing method for low voltage equipment 电压暂降/短时中断 低压设备耐受特性测试方法 - 中英文版 |
|
|
|
|
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 - 中英文版 |
|
|
|
|
GB/T 18802.351-2019 Components for low-voltage surge protective devices－Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) 低压电涌保护器元件 第351部分：电信和信号网络的电涌隔离变压器（SIT）的性能要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 - 中英文版 |
|
|
|
|
GB/T 18802.351-2019 Components for low-voltage surge protective devices－Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) 低压电涌保护器元件 第351部分：电信和信号网络的电涌隔离变压器（SIT）的性能要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method 超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法 - 中英文版 |
|
|
|
|
GB/T 18476-2019 Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） - 中英文版 |
|
|
|
|
GB/T 14235.1-2018 Low temperature pattern wax material for investment casting—Part 1: Testing methods for physical properties 熔模铸造低温模料-第1部分：物理性能试验方法 - 中英文版 |
|
|
|
|
GB/T 14235.2-2018 Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties 熔模铸造低温模料-第2部分：使用性能试验方法 - 中英文版 |
|
|
|
|
GB/T 36137-2018 Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module 中空纤维超滤膜和微滤膜组件完整性检验方法 - 中英文版 |
|
|
|
|
GB/T 8243.5-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 - 中英文版 |
|
|
|
|
GB/T 8243.15-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 - 中英文版 |
|
|
|
|
GB/T 15623.1-2018 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1: Test methods for four-port directional flow-control valves 液压传动 电调制液压控制阀 第1部分：四通方向流量控制阀试验方法 - 中英文版 |
|
|
|
|
GB/T 34862-2017 Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors 确定三相低压笼型感应电动机等值电路参数的试验方法 - 中英文版 |
|
|
|
|
GB/T 15623.2-2017 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 2: Test methods for three-port directional flow-control valves 液压传动 电调制液压控制阀 第2部分：三通方向流量控制阀试验方法 - 中英文版 |
|
|
|
|
GB/T 34775-2017 Testing method of flowability for water dispersible granules of pesticide 农药水分散粒剂流动性测定方法 - 中英文版 |
|
|
|
|
GB/T 34699-2017 Test method of physical properties for low temperature sulphur tail gas hydrogenation catalyst 低温硫磺尾气加氢催化剂物理性能试验方法 - 中英文版 |
|
|
|
|
GB/T 34481-2017 Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices 低位错密度锗单晶片腐蚀坑密度(EPD)的测量方法 - 中英文版 |
|
|
|
|
GB/T 34544-2017 Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles 小型燃料电池车用低压储氢装置安全试验方法 - 中英文版 |
|
|
|
|
GB/Z 34603-2017 Gaseous-media fire-extinguishing systems—Engineered extinguishing systems—Flow calculation implementation method and flow verification and testing for approval 气体灭火系统 预设计 流量计算方法及验证试验 - 中英文版 |
|
|
|
|
GB/T 34619-2017 Test method for volumetric flow of positive displacement refrigerant compressors 容积式制冷剂压缩机容积流量试验方法 - 中英文版 |
|
|
|
|
GB/T 34233-2017 Test method of activity for low temperature sulphur tail gas hydrogenation catalyst 低温硫磺尾气加氢催化剂活性试验方法 - 中英文版 |
|
|
|
|
GB/T 8243.7-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7：Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分：振动疲劳试验 - 中英文版 |
|
|
|
|
GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 - 中英文版 |
|
|
|
|
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11: Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products (GWEPT) 电工电子产品着火危险试验 第11部分：灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法(GWEPT) - 中英文版 |
|
|
|
|
GB/T 5169.10-2017 Fire hazard testing for electric and electronic products—Part 10: Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第10部分：灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法 - 中英文版 |
|
| Find out:127Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
