China Test method for temp GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 22459.9-2024 Refractory mud - Part 9: Test method for shear bond strength at room temperature 耐火泥浆-第9部分：常温抗剪粘接强度试验方法 - 中英文版 |
 |
|
|
|
GB/T 43853-2024 High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc Method 激光修复层高温摩擦磨损性能试验-球-盘法 - 中英文版 |
|
|
|
|
GB/T 43873-2024 Test method for upper and lower limit temperature of ultra-thin glass annealing 超薄玻璃退火上下限温度试验方法 - 中英文版 |
|
|
|
|
GB/T 6803-2023 Drop weight test method for non-plastic transition temperature of ferritic steels 铁素体钢的无塑性转变温度落锤试验方法 - 中英文版 |
|
|
|
|
GB/T 43296-2023 Test method for room temperature bending fatigue properties of fine ceramics 精细陶瓷室温弯曲疲劳性能试验方法 - 中英文版 |
|
|
|
|
GB/T 1965-2023 Porous ceramics - test method for room temperature flexural strength 多孔陶瓷 室温弯曲强度试验方法 - 中英文版 |
|
|
|
|
GB/T 1964-2023 Porous ceramics - Test method for compressive strength at room temperature 多孔陶瓷 室温压缩强度试验方法 - 中英文版 |
|
|
|
|
GB/T 43255-2023 Test method for low temperature cold starting performance of fuel cell electric vehicles 燃料电池电动汽车低温冷起动性能试验方法 - 中英文版 |
|
|
|
|
GB/T 43118-2023 Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 - 中英文版 |
|
|
|
|
GB/T 43092-2023 Electrochemical performance testing of lithium-ion battery cathode materials High temperature performance testing method 锂离子电池正极材料电化学性能测试 高温性能测试方法 - 中英文版 |
|
|
|
|
GB/T 42657-2023 Test method for infrared refractive index temperature coefficient of infrared optical glass - vertical incidence method 红外光学玻璃红外折射率温度系数测试方法 垂直入射法 - 中英文版 |
|
|
|
|
GB/T 42667-2023 Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method 精细陶瓷室温等双轴弯曲强度试验方法 双环法 - 中英文版 |
|
|
|
|
GB/T 42655-2023 Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 - 中英文版 |
|
|
|
|
GB/T 42910-2023 Test method for high temperature compression shear strength of inorganic adhesives 无机胶粘剂高温压缩剪切强度试验方法 - 中英文版 |
|
|
|
|
GB/T 42913-2023 Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 - 中英文版 |
|
|
|
|
GB/T 42912-2023 Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 - 中英文版 |
|
|
|
|
GB/T 42900-2023 High strain rate and high temperature compression test method for metallic materials 金属材料 高应变速率高温压缩试验方法 - 中英文版 |
|
|
|
|
GB/T 5989-2023 Refractories - Test method for softening temperature under load (differential heating method) 耐火材料 荷重软化温度试验方法(示差升温法) - 中英文版 |
|
|
|
|
GB/T 42603.2-2023 Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability 熔模铸造中温模料 第2部分:使用性能试验方法 - 中英文版 |
|
|
|
|
GB/T 42603.1-2023 Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties 熔模铸造中温模料 第1部分：物理性能试验方法 - 中英文版 |
|
|
|
|
GB/T 5170.18-2022 Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 - 中英文版 |
|
|
|
|
GB/T 41605-2022 Silicon nitride materials for rolling bearing balls - Test method for indentation fracture resistance at room temperature - Indentation method 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法 - 中英文版 |
|
|
|
|
GB/T 41490-2022 Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法 - 中英文版 |
|
|
|
|
GB/T 24581-2022 Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low temperature FT-IR analysis method 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法 - 中英文版 |
|
|
|
|
GB/T 42261-2022 Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under temperature gradient 金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法 - 中英文版 |
|
|
|
|
GB/T 12085.23-2022 Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 - 中英文版 |
|
|
|
|
GB/T 41641-2022 Measurement of mechanical properties - Tensile test method for REBCO strip at room temperature 力学性能测量 REBCO带材室温拉伸试验方法 - 中英文版 |
|
|
|
|
GB/T 41872-2022 Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法 - 中英文版 |
|
|
|
|
GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA） 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA） - 中英文版 |
|
|
|
|
GB/T 1425-2021 Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 - 中英文版 |
|
|
|
|
GB/T 40286-2021 The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization 低温双循环余热回收利用装置性能测试方法 - 中英文版 |
|
|
|
|
GB/T 19216.3-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.2-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.1-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 39933-2021 Rotational moulding—Test method for low temperature impact 滚塑成型 低温冲击试验 - 中英文版 |
|
|
|
|
GB/T 39828-2021 Test method for determining elastic modulus of thick ceramic coating at elevated temperature 陶瓷厚涂层的高温弹性模量试验方法 - 中英文版 |
|
|
|
|
GB/T 19136-2021 Testing method of the accelerated storage stability at elevated temperature for pesticides 农药热储稳定性测定方法 - 中英文版 |
|
|
|
|
GB/T 38924.2-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test 民用轻小型无人机系统环境试验方法 第2部分: 低温试验 - 中英文版 |
|
|
|
|
GB/T 38924.3-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test 民用轻小型无人机系统环境试验方法 第3部分：高温试验 - 中英文版 |
|
|
|
|
GB/T 38924.4-2020 Environmental test methods for civil small and light unmanned aircraft system—Part 4: Temperature and altitude test 民用轻小型无人机系统环境试验方法 第4部分：温度和高度试验 - 中英文版 |
|
|
|
|
GB/T 38912-2020 Test method for closed-end burst of zirconium tubes at room temperature 锆管室温闭端爆破试验方法 - 中英文版 |
|
|
|
|
GB/T 38804-2020 Test method for oxidation of metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 - 中英文版 |
|
|
|
|
GB/T 38534-2020 Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 32065.8-2020 Environmental test methods for oceanographic instruments—Part 8：Change of temperature test 海洋仪器环境试验方法 第8部分：温度变化试验 - 中英文版 |
|
|
|
|
GB/T 38298-2019 Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 - 中英文版 |
|
|
|
|
GB/T 23711.3-2019 Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 - 中英文版 |
|
|
|
|
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 - 中英文版 |
|
|
|
|
GB/T 38430-2019 Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 - 中英文版 |
|
|
|
|
GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags 睡袋的热阻和使用温度的测定方法 - 中英文版 |
|
|
|
|
GB/T 38298-2019 Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 - 中英文版 |
|
| Find out:150Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
