China Test method of C-Rin GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 33488.5-2024 Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: Ultrasonic testing by time-of-flight diffraction 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 - 中英文版 |
 |
|
|
|
GB/T 43615-2023 Additive manufacturing Ultrasonic testing method of directed energy deposition metal forming parts 增材制造 定向能量沉积金属成形件超声检测方法 - 中英文版 |
|
|
|
|
GB/T 43289-2023 Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 - 中英文版 |
|
|
|
|
GB 4789.45-2023 National Food Safety Standard General Principles for Verification of Microbiological Test Methods 食品安全国家标准 微生物检验方法验证通则 - 中英文版 |
|
|
|
|
GB/T 43073-2023 Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers 气动 测量排气消声器声压级的试验方法 - 中英文版 |
|
|
|
|
GB/T 43016-2023 Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles 人造革合成革试验方法 表面褶皱的测定和评价 - 中英文版 |
|
|
|
|
GB/T 43015-2023 Synthetic fibers - Test method for dry heat shrinkage of short fibers 合成纤维 短纤维干热收缩率试验方法 - 中英文版 |
|
|
|
|
GB/T 1458-2023 Test method for mechanical properties of fiber-wound reinforced composite ring specimens 纤维缠绕增强复合材料环形试样力学性能试验方法 - 中英文版 |
|
|
|
|
GB/T 42902-2023 Testing of surface defects of silicon carbide epitaxial wafers Laser scattering method 碳化硅外延片表面缺陷的测试 激光散射法 - 中英文版 |
|
|
|
|
GB/T 42899-2023 Test method for weldability of marine engineering structural steel 海洋工程结构钢可焊性试验方法 - 中英文版 |
|
|
|
|
GB/T 42672-2023 Corrosion of metals and alloys - Methods for monitoring environmental factors in surface seawater exposure tests 金属和合金的腐蚀 表层海水暴露试验环境因素监测方法 - 中英文版 |
|
|
|
|
GB/T 42661-2023 Corrosion of metals and alloys Test method for stress corrosion susceptibility of steel bars in simulated marine environment 金属和合金的腐蚀 模拟海洋环境中钢筋应力腐蚀敏感性试验方法 - 中英文版 |
|
|
|
|
GB/T 42712-2023 Design principles and calibration methods of Chinese dummies for mechanical damage testing 力学损伤测试用中国假人设计原则与标定方法 - 中英文版 |
|
|
|
|
GB/T 42764-2023 Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 - 中英文版 |
|
|
|
|
GB/T 6683.3-2023 Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods 石油及相关产品 测量方法与结果精密度 第3部分：试验方法已发布精密度数据的监测和验证 - 中英文版 |
|
|
|
|
GB/T 19700-2023 Test method for thermal performance of marine heat exchangers 船用热交换器热工性能试验方法 - 中英文版 |
|
|
|
|
GB/T 13477.21-2022 Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering 建筑密封材料试验方法 第21部分：人工加速气候老化后颜色变化的测定 - 中英文版 |
|
|
|
|
GB/T 41425-2022 Test method for overall bearing impact performance of infant walking belt 婴幼儿学步带整体承载冲击性能试验方法 - 中英文版 |
|
|
|
|
GB/T 13477.23-2022 Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 - 中英文版 |
|
|
|
|
GB/T 13477.22-2022 Test methods for building sealing materials - Part 22: Determination of curing characteristics 建筑密封材料试验方法 第22部分：固化特性的测定 - 中英文版 |
|
|
|
|
GB/T 41797-2022 Performance requirements and test methods of driver attention monitoring system 驾驶员注意力监测系统性能要求及试验方法 - 中英文版 |
|
|
|
|
GB/T 41755-2022 Cracking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法 - 中英文版 |
|
|
|
|
GB/T 38265.3-2022 Test methods for soldering fluxes - Part 3: Determination of acid value - Potentiometric and visual titration 软钎剂试验方法 第3部分：酸值的测定 电位滴定法和目视滴定法 - 中英文版 |
|
|
|
|
GB/T 38265.9-2022 Test methods for soldering fluxes - Part 9: Determination of ammonia content 软钎剂试验方法 第9部分：氨含量的测定 - 中英文版 |
|
|
|
|
GB/T 38265.8-2022 Test methods for soldering fluxes - Part 8: Determination of zinc content 软钎剂试验方法 第8部分：锌含量的测定 - 中英文版 |
|
|
|
|
GB/T 38265.6-2022 Test methods for soldering fluxes - Part 6: Determination of halide (excluding fluoride) content 软钎剂试验方法 第6部分：卤化物（不包括氟化物）含量的测定 - 中英文版 |
|
|
|
|
GB/T 3658-2022 Ring test method for magnetic properties of soft magnetic metal materials and powder metallurgy materials in the frequency range of 20Hz to 100kHz 软磁金属材料和粉末冶金材料20Hz～100kHz频率范围磁性能的环形试样测量方法 - 中英文版 |
|
|
|
|
GB/T 13789-2022 Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester 用单片测试仪测量电工钢带(片)磁性能的方法 - 中英文版 |
|
|
|
|
GB/T 41753-2022 Test method for artificial weathering pull-down compression cycle durability of sealants 密封胶人工气候老化下拉压循环耐久性试验方法 - 中英文版 |
|
|
|
|
GB/Z 13672-2022 Test method for bearing capacity of gear bonding 齿轮胶合承载能力试验方法 - 中英文版 |
|
|
|
|
GB/T 41852-2022 Semiconductor devices; microelectromechanical devices; bending and shearing test methods for bonding strength of MEMS structures 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法 - 中英文版 |
|
|
|
|
GB/T 40512-2021 Test method of exposure to weathering for motor vehicle 汽车整车大气暴露试验方法 - 中英文版 |
|
|
|
|
GB/T 20081.3-2021 Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 - 中英文版 |
|
|
|
|
GB/T 9966.9-2021 Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency 天然石材试验方法 第9部分：通过测量共振基本频率测定动力弹性模数 - 中英文版 |
|
|
|
|
GB/T 1551-2021 Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method 硅单晶电阻率的测定 直排四探针法和直流两探针法 - 中英文版 |
|
|
|
|
GB/T 39982-2021 Water lubricated journal bearings—Test methods of load carrying capacity 水润滑径向滑动轴承 承载能力测试方法 - 中英文版 |
|
|
|
|
GB/T 25217.8-2021 Methods for test，monitoring and prevention of rock burst-Part 8:Monitoring method of electromagnetic radiation 冲击地压测定、监测与防治方法 第8部分：电磁辐射监测方法 - 中英文版 |
|
|
|
|
GB/T 15911-2021 Monitoring and testing method for energy saving of industrial electroheat devices 工业电热设备节能监测方法 - 中英文版 |
|
|
|
|
GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 - 中英文版 |
|
|
|
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 中英文版 |
|
|
|
|
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 - 中英文版 |
|
|
|
|
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 中英文版 |
|
|
|
|
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 - 中英文版 |
|
|
|
|
GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 - 中英文版 |
|
|
|
|
GB/T 39788-2021 System and software engineering—Performance testing method 系统与软件工程 性能测试方法 - 中英文版 |
|
|
|
|
GB/T 7308.1-2021 Plain bearings—Thin-walled half bearings with or without flange—Part 1：Tolerances, design features and methods of test 滑动轴承 有法兰或无法兰薄壁轴瓦 第1部分:公差、结构要素和检验方法 - 中英文版 |
|
|
|
|
GB/T 5095.2307-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors 电子设备用机电元件 基本试验规程及测量方法 第23-7部分：屏蔽和滤波试验 试验23g：连接器的有效转移阻抗 - 中英文版 |
|
|
|
|
GB/T 5095.2303-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 - 中英文版 |
|
|
|
|
GB/T 38265.15-2021 Test methods for soft soldering fluxes—Part 15: Copper corrosion test 软钎剂试验方法 第15部分：铜腐蚀试验 - 中英文版 |
|
|
|
|
GB/T 38265.14-2021 Test methods for soft soldering fluxes—Part 14: Assessment of tackiness of flux residues 软钎剂试验方法 第14部分：钎剂残留物胶粘性的评价 - 中英文版 |
|
| Find out:220Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 |
+86-755-2583-1330
