China Test methods for bas GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 44049-2024 Construction machinery-test and calculation methods for basic data of operating energy consumption 工程机械-运行能耗基础数据测试与计算方法 - 中英文版 |
 |
|
|
|
GB/T 43849-2024 Basic Environmental Test Methods for Underwater Robot Complete Machines and Components-Hydrostatic Pressure Test Method 水下机器人整机及零部件基本环境试验方法-水静压力试验方法 - 中英文版 |
|
|
|
|
GB/T 7702.7-2023 Test methods for coal-based granular activated carbon-Part 7: Determination of iodine adsorption value 煤质颗粒活性炭试验方法 第7部分：碘吸附值的测定 - 中英文版 |
|
|
|
|
GB/T 17657-2022 Test methods for physical and chemical properties of wood-based panels and veneered wood-based panels 人造板及饰面人造板理化性能试验方法 - 中英文版 |
|
|
|
|
GB/T 40048-2021 Test methods for bolted connections in structural wood and wood-based materials 木质结构材螺栓连接力学性能测试方法 - 中英文版 |
|
|
|
|
GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 - 中英文版 |
|
|
|
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 中英文版 |
|
|
|
|
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 - 中英文版 |
|
|
|
|
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 中英文版 |
|
|
|
|
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 - 中英文版 |
|
|
|
|
GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 - 中英文版 |
|
|
|
|
GB/T 39846-2021 LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between trunking core network and dispach console 基于LTE技术的宽带集群通信（B-TrunC）系统 接口测试方法（第一阶段） 集群核心网到调度台接口 - 中英文版 |
|
|
|
|
GB/T 39840-2021 LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Air interface 基于LTE技术的宽带集群通信（B-TrunC）系统 接口测试方法（第一阶段） 空中接口 - 中英文版 |
|
|
|
|
GB/T 39838-2021 LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between UE and trunking core network 基于LTE技术的宽带集群通信（B-TrunC）系统 接口测试方法（第一阶段） 终端到集群核心网接口 - 中英文版 |
|
|
|
|
GB/T 5095.2507-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) 电子设备用机电元件 基本试验规程及测量方法 第25-7部分：试验25g：阻抗、反射系数和电压驻波比（VSWR） - 中英文版 |
|
|
|
|
GB/T 5095.2505-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5：Test 25e: Return loss 电子设备用机电元件 基本试验规程及测量方法 第25-5部分：试验25e：回波损耗 - 中英文版 |
|
|
|
|
GB/T 5095.2504-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay 电子设备用机电元件 基本试验规程及测量方法 第25-4部分：试验25d：传输时延 - 中英文版 |
|
|
|
|
GB/T 5095.2503-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation 电子设备用机电元件 基本试验规程及测量方法 第25-3部分：试验25c：上升时间衰减 - 中英文版 |
|
|
|
|
GB/T 5095.2502-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss) 电子设备用机电元件 基本试验规程及测量方法 第25-2部分：试验25b：衰减（插入损耗） - 中英文版 |
|
|
|
|
GB/T 5095.2501-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio 电子设备用机电元件 基本试验规程及测量方法 第25-1部分：试验25a：串扰比 - 中英文版 |
|
|
|
|
GB/T 5095.2307-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors 电子设备用机电元件 基本试验规程及测量方法 第23-7部分：屏蔽和滤波试验 试验23g：连接器的有效转移阻抗 - 中英文版 |
|
|
|
|
GB/T 5095.2304-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain 电子设备用机电元件 基本试验规程及测量方法 第23-4部分：屏蔽和滤波试验 试验23d：时域内传输线的反射 - 中英文版 |
|
|
|
|
GB/T 5095.2303-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 - 中英文版 |
|
|
|
|
GB/T 5095.2509-2020 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests－Test 25i: Alien crosstalk 电子设备用机电元件 基本试验规程及测量方法 第25-9部分：信号完整性试验 试验25i：外来串扰 - 中英文版 |
|
|
|
|
GB/T 5095.2506-2020 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6：Test 25f：Eye pattern and jitter 电子设备用机电元件 基本试验规程及测量方法 第25-6部分：试验25f：眼图和抖动 - 中英文版 |
|
|
|
|
GB/T 11026.10-2019 Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy 电气绝缘材料 耐热性 第10部分：利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则 - 中英文版 |
|
|
|
|
GB/T 36766-2018 Performance test methods of deoxidation for Pt-Pd based deoxidation catalyst 铂钯系脱氧剂脱氧性能试验方法 - 中英文版 |
|
|
|
|
GB/T 22517.4-2017 Technical requirements and test methods for sports fields—Part 4: Synthetic surface for basketball 体育场地使用要求及检验方法 第4部分：合成面层篮球场地 - 中英文版 |
|
|
|
|
GB/T 34096-2017 Mobile payment—Test methods for contactless reader terminal based on 2.45GHz range controlled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触式读写器终端测试方法 - 中英文版 |
|
|
|
|
GB/T 33739-2017 Test methods for radio frequency interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology 基于13.56MHz和2.45GHz双频技术的非接触式读写器射频接口测试方法 - 中英文版 |
|
|
|
|
GB/T 33737-2017 Mobile payment—Test methods for intellegent card based on 2.45GHz RRC(range controlled communication) technology 手机支付 基于2.45GHz RCC（限域通信）技术的智能卡测试方法 - 中英文版 |
|
|
|
|
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11: Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products (GWEPT) 电工电子产品着火危险试验 第11部分：灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法(GWEPT) - 中英文版 |
|
|
|
|
GB/T 5169.10-2017 Fire hazard testing for electric and electronic products—Part 10: Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第10部分：灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法 - 中英文版 |
|
|
|
|
GB/T 15022.2-2017 Resin based reactive compounds used for electrical insulation—Part 2: Methods of test 电气绝缘用树脂基活性复合物 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 9359-2016 Basic conditions and methods of environmental test for hydrological instrument 水文仪器基本环境试验条件及方法 - 中英文版 |
|
|
|
|
GB/T 3810.1-2016 Test methods of ceramic tiles—Part 1: Sampling and basis for acceptance 陶瓷砖试验方法 第1部分：抽样和接收条件 - 中英文版 |
|
|
|
|
GB/T 9766.2-2016 Test method for tyre valves—Part 2: Rubber base valves test methods 轮胎气门嘴试验方法 第2部分：胶座气门嘴试验方法 - 中英文版 |
|
|
|
|
GB/T 21223.1-2015 Guide for the statistical analysis of ageing test data—Part 1: Methods based on mean values of normally distributed test results 老化试验数据统计分析导则 第1部分：建立在正态分布试验结果的平均值基础上的方法 - 中英文版 |
|
|
|
|
GB/T 31264-2014 Test methods for mechanical properties of structural wood-based panels 结构用人造板力学性能试验方法 - 中英文版 |
|
|
|
|
GB/T 5169.13-2013 Fire hazard testing for electric and electronic product―Part 13：Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials 电工电子产品着火危险试验 第13部分：灼热丝/热丝基本试验方法 材料的灼热丝起燃温度（GWIT）试验方法 - 中英文版 |
|
|
|
|
GB/T 5169.12-2013 Fire hazard testing for electric and electronic products―Part 12: Glowing/hot-wire based test methods―Glow-wire flammability index (GWFI) test method for materials 电工电子产品着火危险试验 第12部分：灼热丝/热丝基本试验方法 材料的灼热丝可燃性指数(GWFI)试验方法 - 中英文版 |
|
|
|
|
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration 横向振动法测试木质材料动态弯曲弹性模量方法 - 中英文版 |
|
|
|
|
GB/T 30001.5-2013 Information technology - RF-based mobile payment - Part 5: Test methods of radio frequency interface 信息技术 基于射频的移动支付 第5部分：射频接口测试方法 - 中英文版 |
|
|
|
|
GB/T 27934.3-2011 Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive 纸质印刷品覆膜过程控制及检测方法 第3部分：水基胶黏剂即涂干式覆膜 - 中英文版 |
|
|
|
|
GB/T 17491-2011 Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance 液压泵、马达和整体传动装置 稳态性能的试验及表达方法 - 中英文版 |
|
|
|
|
GB/T 25480-2010 Basic environmental conditions and testing methods for transportation and storage of instruments 仪器仪表运输、贮存基本环境条件及试验方法 - 中英文版 |
|
|
|
|
GB/T 24105-2009 Basic conditions and methods of environmental test for geotechnical engineering instrument 岩土工程仪器基本环境试验条件及方法 - 中英文版 |
|
|
|
|
GB/T 5132.2-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test 电气用热固性树脂工业硬质圆形层压管和棒 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 5019.2-2009 Specification for insulating materials based on mica - Part 2: Methods of test 以云母为基的绝缘材料 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 1303.2-2009 Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods 电气用热固性树脂工业硬质层压板 第2部分：试验方法 - 中英文版 |
|
| Find out:101Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
