Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

GB Standards english file list

       
GB 9764-2009
Tyre valve-core chambers
轮胎气门嘴芯腔
GB/T 21007-2007
Surface chemical analysis - Information formats
表面化学分析 信息格式
GB 2024-1994
Acupuncture needles
针炙针
GB/T 30789.9-2014
Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects,and of intensity of uniform changes in appearance―Part 9: Assessment of degree of filiform corrosion
色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第9部分:丝状腐蚀等级的评定
GB/T 34377-2017
Technical code for application design, installation and acceptance of domestic solar water heating systems
家用太阳能热水系统应用设计、安装及验收技术规范
GB/T 26106-2010
Mechanically deposited coatings of zinc - Specification and test methods
机械镀锌层 技术规范和试验方法
GB/T 33828-2017
Determination of contents of Fe(Ⅲ)in Nano lithium iron phosphate
纳米磷酸铁锂中三价铁含量的测定方法
GB/T 14372-2013
Transport of dangerous goods - Test method of acceptance and classification for explosives
危险货物运输 爆炸品的认可和分项试验方法
GB/T 1135-2004
Shell machine reamers and arbors
套式机用铰刀和芯轴
GB 1886.225-2016
National Food Safety Standard - Food Additives - ethoxyquin
食品安全国家标准 食品添加剂 乙氧基喹
GB/T 7717.16-2009
Acrylonitrile for industrial use - Part 16: Determination of content of iron - Graphite furnace atomic absorption spectrometer method
工业用丙烯腈 第16部分:铁含量的测定 石墨炉原子吸收法
GB/T 11148-2008
Test method for solubility of asphalt
石油沥青溶解度测定法
GB/T 15487-1995
Methods of flow measurement for displacement com-pressor
容积式压缩机流量测量方法
GB/T 9478-2005
Testing methods of sowing in lines
谷物条播机 试验方法
GB 28357-2012
National Food Safety Standard - Food Additive - Isoamyl Salicylate
食品安全国家标准 食品添加剂 水杨酸异戊酯(柳酸异戊酯)
GB/T 35266-2017
Textiles—Determination of splitting rates of composite microfibers in fabrics
纺织品 织物中复合超细纤维开纤率的测定
GB/T 14905-2009
Rubber and plastics hoses - Determination of adhesion between components
橡胶和塑料软管 各层间粘合强度的测定
GB/T 31116-2014
Canned mixed congee
八宝粥罐头
GB 19999-2005
Safety of woodworking machines -- Four-side Moulding Machines and four-side planing machies
木工机床安全 四面铣床和四面刨床
GB/T 12449-1990
Interface for using dedicated interconnections between sound and television broadcasting transmitting equipment and supervisory equipment
以专用连接线方式互连的声音和电视广播发射设备与监控设备之间的接口
GB/T 34630.4-2017
Friction stir welding—Aluminium and its alloys—Part 4:Specification and qualification of welding procedures
搅拌摩擦焊 铝及铝合金 第4部分:焊接工艺规程及评定
GB/T 4122.2-2010
Packaging terms - Part 2: Machinery
包装术语 第2部分:机械
GB/T 18147.1-2008
Test method for hemp fibre - Part 1: Test method for oil content of hemp fibre
大麻纤维试验方法 第1部分:含油率试验方法
GB/T 1880-1995
Phosphate rock and concentrate--Determination of sulfur trioxide content--Gravimetric method
磷矿石和磷精矿中三氧化硫含量的测定 重量法
GB/T 10043-2017
Clutch classification
离合器分类
GB/T 3535-2006
Petroleum products - Determination of pour point
石油产品倾点测定法
GB/T 11848.10-1999
Determination of sulfur in uranium ore concentrate by combustion-iodometric titrimetry
铀矿石浓缩物中硫的测定 燃烧-碘量法
GB/T 29517-2013
Method for manual sample preparation of chrome ores in bulk
散装铬矿石手工制样方法
GB/T 8565.1-1988
Information processing--Coded character sets for text communication--Part 1:General introduction
信息处理 文本通信用编码字符集 第一部分:总则
GB/T 32505-2016
Variable-frequency drive for machine tool
机床专用变频调速设备
GB 25491-2010
Molding machine - Safety requirements
造型机 安全要求
GB/T 15343-2012
Methods for chemical analysis of talc
滑石化学分析方法
GB/T 22371-2008
Environment protect requirements of fax machines
传真机、多功能复合型传真机环境保护要求
GB/T 16523-1996
Specification for round quartz photomask substrates
圆形石英玻璃光掩模基板规范
GB/T 19466.6-2009
Plastics - Differential scanning calorimetry(DSC)- Part 6: Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT)
塑料 差示扫描量热法(DSC)第6部分:氧化诱导时间(等温OIT)和氧化诱导温度(动态OIT)的测定
GB/T 3048.9-2007
Test methods for electrical properties of electric cables and wires - Part 9:Spark test of insulated cores
电线电缆电性能试验方法 第9部分:绝缘线芯火花试验
GB/T 3051-2000
Inorganic chemical products for industrial use--General method for determination of chloride content--Mercurimetric method
无机化工产品中氯化物含量测定的通用方法 汞量法
GB/T 6326-2014
Tyre terms and definitions
轮胎术语及其定义
GB 26640-2011
Specification for minimal thickness of the shell of valves
阀门壳体最小壁厚尺寸要求规范
GB/T 13744-1992
The measurement of coating thickness for electro-deposited nickel coatings on magnetic and non-magnetic substracts
磁性和非磁性基体上镍电镀层厚度的测量
GB 50854-2013
Standard method of measurement for building construction and fitting-out works
房屋建筑与装饰工程工程量计算规范
GB/T 2895-2008
Plastics polyester resin - Determination of partial acid value and total acid value
塑料 聚酯树脂 部分酸值和总酸值的测定
GB/T 29864-2013
Textiles - Test method for pollenproof property - Air suction
纺织品 防花粉性能试验方法 气流法
GB/T 16925-1997
Test method for abrasion resistance of concrete and its products(Ball bearing method)
混凝土及其制品耐磨性试验方法 (滚珠轴承法)
GB/T 33122-2016
Detection and identification of Cepaea hortensis (Müller, 1774)
花园葱蜗牛检疫鉴定方法
GB/T 12008.6-2010
Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation
塑料 聚醚多元醇 第6部分:不饱和度的测定
GB/T 13382-2008
Edible soybean meal
食用大豆粕
GB 3838-2002
Environmental quality standards for surface water
地表水环境质量标准
GB/T 12617.5-2006
Open end blind rivets with break pull mandrel and countersunk head―property class 20,21,22
开口型沉头抽芯铆钉 20、21、22级
GB/T 28371-2012
Ferroalloys - Experimental methods for checking the precision of sample division
铁合金 检查样品缩分精度的试验方法
GB/T 23381-2009
Determination of 6 -benzylaminopurine in foods - High-performance liquid chromatography
食品中6-苄基腺嘌呤的测定 高效液相色谱法
GB 32086-2015
Requirement of vertical flammability characteristic and test method for certain category automobile interior material
特定种类汽车内饰材料垂直燃烧特性技术要求和试验方法
GB/T 17241.1-1998
Synoptic table for cast iron pipe flanges
铸铁管法兰 类型
GB/T 17850.11-2011
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分:钢渣特种型砂
GB/T 2101-2008
General requirement of acceptance, packaging, marking, and certification for section steel
型钢验收、包装、标志及质量证明书的一般规定
GB 19375-2003
Limousin breeding stock
利木赞种牛
GB/T 34682-2017
Determination of volatile organic compound(VOC) content in reactive diluent containing coatings
含有活性稀释剂的涂料中挥发性有机化合物(VOC)含量的测定
GB/T 460-2008
Paper-determination of the sizing value
纸施胶度的测定
GB/T 9239.1-2006
Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances
机械振动 恒态(刚性)转子平衡品质要求 第1部分:规范与平衡允差的检验
GB/T 30262-2013
Evaluation methods for exergy efficiency of air-cooled heat exchangers
空冷式热交换器火用效率评价方法
GB/T 33792-2017
2,4-Diaminobenzenesulfonic acid sodium salt
2,4-二氨基苯磺酸钠
GB/T 17971.1-2010
Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts
信息技术 文本和办公系统的键盘布局 第1部分:指导键盘布局通则
GB/T 32395-2015
Information technology—Extended requirements of Application Programming Interface (API) for Chinese Linux operating system
信息技术 中文Linux操作系统应用编程接口(API)扩充要求
GB/T 28737-2012
Controller for solar water heating system (tank volume more than 0.6 m3)
太阳能热水系统(储水箱容积大于0.6 m3)控制装置
GB/T 22690-2008
General mechanical structures for data communication equipment - Cabinet and subrack
数据通信设备通用机械结构 机柜和插箱
GB/T 5009.171-2003
Determination of the action ofsuperoxide dismutase in health foods
保健食品中超氧化物歧化酶(SOD)活性的测定
GB/T 23687-2009
Guide of environmentally conscious design for ICT & CE products
信息通信技术和消费电子产品的环境意识设计导则
GB 10734-2008
Primary chemical - Ethylenediamine tetraacetic acid disodium salt
第一基准试剂 乙二胺四乙酸二钠
GB/T 19661.2-2015
Safety requirements for nuclear instrumentations and systems—Part 2: Constructional requirements and classification of radiometric gauges
核仪器及系统安全要求 第2部分:放射性测量计的结构要求和分级
GB/T 16720.1-2005
Industrial automation systems-Manufacturing Message Specification-Part 1:Service definition
工业自动化系统 制造报文规范 第1部分:服务定义
GB/T 35680-2017
Measuring method for electromagnetic parameters of liquid materials at microwave frequencies using an open-ended coaxial probe
液体材料微波频段使用开口同轴探头的电磁参数测量方法
GB/T 26712-2011
Supply stops for sanitary appliance and steam pipe
卫生洁具及暖气管道用直角阀
GB/T 6363-1986
Method for the subjective assessment of the quality of document facsimile
文件传真质量主观评定方法
GB/T 12655-2017
The basic performance requirements of cigarette paper
卷烟纸基本性能要求
GB/T 5832.2-2008
Determination of moisture in gases - Part 2:Dew point method
气体中微量水分的测定 第2部分:露点法
GB/T 5169.44-2013
Fire hazard testing for electric and electronic products―Part 44: Guidance for assessing the fire hazard―Fire hazard assessment
电工电子产品着火危险试验 第44部分:着火危险评定导则 着火危险评定
GB/T 19571-2004
Technical specification for the management of marine protected areas
海洋自然保护区管理技术规范
GB/T 33864-2017
General specification for mass spectrometer
质谱仪通用规范
GB/T 24992-2010
Paper,board and pulps - Determination of arsenic
纸、纸板和纸浆 砷含量的测定
GB/T 14818-2008
General specification for DC servomotors with wounded disc armature
线绕盘式直流伺服电动机通用技术条件
GB/T 14094-2016
Tungsten halogen lamps(non-vehicle) performance requirements
卤钨灯(非机动车辆用)性能要求
GB/T 20119-2006
Flat steel wire ropes for balance
平衡用扁钢丝绳
GB/T 29073-2012
Drafting rules of schedule network for spacecraft development
航天器研制计划流程编写规则
GB/T 24062-2009
Environmental management - Integrating environmental aspects into product design and development
环境管理 将环境因素引入产品的设计和开发
GB/T 31467.2-2015
Lithium-ion traction battery pack and system for Electric vehicles—Part 2: Test specification for High energy applications
电动汽车用锂离子动力蓄电池包和系统 第2部分:高能量应用测试规程
GB/T 27523-2011
Cigarettes - Determination of volatile organic compounds (1,3-butadiene, isoprene, acrylonitrile, benzene, toluene) in mainstream smoke - GC-MS method
卷烟 主流烟气中挥发性有机化合物(1,3-丁二烯、异戊二烯、丙烯腈、苯、甲苯)的测定 气相色谱-质谱联用法
GB/T 21680-2008
Circular saw blades for woodworking - Dimensions
木工圆锯片 尺寸
GB/T 7702.14-2008
Test method for granular activated carbon from coal - Determination of sulphur capacity
煤质颗粒活性炭试验方法 硫容量的测定
GB/T 156-2007
Standard voltages
标准电压
GB 18280-2000
Sterilization of healthcare products--Requirement for validation and routine control--Radiation sterilization
医疗保健产品灭菌 确认和常规控制要求 辐射灭菌
GB 31094-2014
Safety rules for the construction and installation of lifts for explosive atmospheres
防爆电梯制造与安装安全规范
GB 50523-2010
Code for design of occupational safety and hygiene in electronics industry
电子工业职业安全卫生设计规范
GB/T 25333-2010
Labels of diesel locomotive & electric locomotive
内燃、电力机车标记
GB/T 32780-2016
Taimen
哲罗鱼
GB/T 29462-2012
Isolation valve for power station
电站堵阀
GB/T 23136-2008
Floor polishers for household and similar use - Methods for measuring the performance
家用和类似用途地板抛光机性能测试方法
GB/T 24434-2009
Commode chairs
座便椅(凳)
GB 22747-2008
Food processing machinery - Basic concepts - Hygiene requirements
食品加工机械 基本概念 卫生要求
GB/T 14926.49-2001
Laboratory animal--Method for examination of Campylobacter jejuni
实验动物 空肠弯曲杆菌检测方法
GB/T 19928-2005
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom
土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量

Find out:40682Items   |  To Page of: First -Previous-Next -Last  | [166] [167] [168] [169] [170] [171] [172]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved