Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

GB Standards english file list

       
GB/T 2522-2007
Methods of test for determination of surface insulation resistance and lamination factor of electric sheet and strip
电工钢片(带)表面绝缘电阻、涂层附着性测试方法
GB/T 28629-2012
Methods for chemical analysis of free silicon dioxide for cement clinker
水泥熟料中游离二氧化硅化学分析方法
GB/T 23594.2-2009
Chemical analysis methods of rare earth contents in samarium-europium-gadolinium concentrates - Part 2: Determination of fifteen rare earth oxide relative contents - Inductively coupled plasma emission spectrometry
钐铕钆富集物化学分析方法 第2部分:十五个稀土元素氧化物配分量的测定 电感耦合等离子发射光谱法
GB/T 17939-2015
Nuclear grade high efficiency particulate air filters
核级高效空气过滤器
GB/T 26609-2011
Isobutyl acetate for industrial use
工业用乙酸异丁酯
GB/T 4248-2004
Technical conditions for handtaper 1∶50 pin reamers
手用1∶50锥度销子铰刀 技术条件
GB/T 13281-2008
Lead-Acid battery used for passenger trains
铁路客车用铅酸蓄电池
GB/T 25000.12-2017
Systems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 12: Data quality model
系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第12部分:数据质量模型
GB/T 5471-2008
Plastics - Compression moulding of test specimens of thermosetting materials
塑料 热固性塑料试样的压塑
GB/T 12167-2006
Aluminium alloy grip clamps of tension wire for live working
带电作业用铝合金紧线卡线器
GB/T 3260.8-2013
Methods for chemical analysis of tin―Part 8:Determination of zinc content―Flame atomic absorption spectrometric method
锡化学分析方法 第8部分:锌量的测定 火焰原子吸收光谱法
GB/T 33798-2017
Bio-polyester drum-linkage bags
生物聚酯连卷袋
GB/T 17442-1998
Acceptance inspection fordirect connected alternating current static watt-hour meters for active energy (classes 1 and 2)
1级和2级直接接入静止式交流有功电度表验收检验
GB/T 24892-2010
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point)
动植物油脂 在开口毛细管中熔点(滑点)的测定
GB/T 32371.1-2015
Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure
低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第1部分:通则
GB/T 28978-2012
Detection and identification of Clavibacter michiganensis subsp. sepedonicus
马铃薯环腐病菌检疫鉴定方法
GB/T 2091-2008
Phosphoric acid for industry use
工业磷酸
GB/T 23909.2-2009
Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
无损检测 射线透视检测 第2部分:成像装置长期稳定性的校验
GB/T 8647.4-2006
The methods for chemical analysis of nickel - Determination of phosphorous content - Molybdenum blue spectrophotometric method
镍化学分析方法 磷量的测定 钼蓝分光光度法
GB/T 3138-2015
Metallic and other inorganic coatings—Surface treatment,metallic and other inorganic coatings—Vocabulary
金属及其他无机覆盖层 表面处理 术语
GB/T 3768-2017
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
声学 声压法测定噪声源声功率级和声能量级 采用反射面上方包络测量面的简易法
GB/T 16678.5-2000
Information technology--Fibre Distributed Data Interface (FDDI)--Part 5:Hybrid Ring Control(HRC)
信息技术 光纤分布式数据接口(FDDI) 第5部分:混合环控制(HRC)
GB/T 26941.4-2011
Fences - Part 4: Barbed steel wire fences
隔离栅 第4部分:刺钢丝网
GB 7806-1987
Diagnostic criteria and principles of management of occupational contact dermatitis
职业性接触性皮炎诊断标准及处理原则
GB/T 32419.6-2017
Information technology—Specification for SOA technical implementation—Part 6: Identity management service
信息技术 SOA技术实现规范 第6部分:身份管理服务
GB/T 7163-2008
Requirements of reliability analysis for nuclear power plant safety systems
核电厂安全系统的可靠性分析要求
GB 20178-2014
Earth-moving machinery—Machine safety labels—General principles
土方机械 机器安全标签 通则
GB/T 22665.2-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 2: Screwdrivers and impact wrenches
手持式电动工具手柄的振动测量方法 第2部分:螺丝刀和冲击扳手
GB/T 33936-2017
Mine hoists—Assessment specification for recycle
矿井提升机 回收评估规范
GB/T 25226-2010
Rice - Evaluation of gelatinization time of kernels during cooking
大米 蒸煮过程中米粒糊化时间的评价
GB/Z 20996.2-2007
Performance of high-voltage direct current(HVDC)systems - Part 2: Faults and switching
高压直流系统的性能 第2部分:故障和操作
GB/T 13024-2016
Liner board
箱纸板
GB/T 18337.1-2001
Non-commercial forest construction--Guide principle
生态公益林建设 导则
GB/T 14909-2005
Technical guides for exergy analysis in energy system
能量系统用分析技术导则
GB/T 29341-2012
Calcium aluminate for water treatment chemicals
水处理剂用铝酸钙
GB/T 24336-2009
Classification of earthquake damage to lifeline engineering
生命线工程地震破坏等级划分
GB/T 27752-2011
Validation of the strength of uranium reference solution, plutonium reference solution and potassium dichromate reference solution
铀、钚和重铬酸钾标准溶液浓度的确认
GB/T 14727-2008
General specification for the wireless hearing system equipment for the deaf children
无线传输式聋儿听力言语训练设备通用技术条件
GB/T 9326.2-2008
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 2:Oil-filled paper insulated, lead-sheathed cables for alternating voltages up to and including
交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第2部分: 交流500kV及以下纸绝缘铅套充油电缆
GB/T 3672.1-2002
Rubber--Tolerances of products--Part 1:Dimensional tolerances
橡胶制品的公差 第1部分:尺寸公差
GB/T 20083.2-2006
Air-assisted agricultural sprayers - Data sheets - Part 2: Technical specifications related to components
风送农业喷雾机 数据表 第2部分:零部件技术规范
GB/T 16783.1-2014
Petroleum and natural gas industries―Field testing of drilling fluids―Part 1: Water-based fluids
石油天然气工业 钻井液现场测试 第1部分:水基钻井液
GB 50118-2010
Code for design of sound insulation of civil buildings
民用建筑隔声设计规范
GB/T 25645-2010
Information technology - Technical requirement for chinese linux server operating system
信息技术 中文Linux服务器操作系统技术要求
GB/T 32750-2016
Chahua chicken
茶花鸡
GB/Z 28818-2012
Selection guide for polymeric materials for outdoor use under HV stress
高电压下户外用聚合物材料的选用导则
GB/T 272-1993
Rolling bearing--Identification code
滚动轴承 代号方法
GB/T 21645.1-2008
Technical requirements for Automatically Switched Optical Network - Part 1: Architecture and general requirements
自动交换光网络(ASON)技术要求 第1部分: 体系结构与总体要求
GB/T 24663-2009
Electronic commerce - Core metadata for enterprise
电子商务 企业核心元数据
GB/T 19245-2003
Specification for information interchange of electronic business card
电子名片信息交换规范
GB/T 14829-2007
Variable-speed V-belts for agricultural machinery
农业机械用变速V带
GB/T 11106-1989
Metallic powder--Determination of green strength by compression of cylinder compacts
金属粉末 用圆柱形压坯的压缩测定压坯强度的方法
GB/T 28083-2011
Detection and identification of Ceratocystis fagacearum (Bretz) Hunt
栎枯萎病菌检疫鉴定方法
GB 23712-2009
Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits for machine tools
工业机械电气设备 电磁兼容 机床发射限值
GB/T 30647-2014
Determination of harmful elements total content of coatings
涂料中有害元素总含量的测定
GB 16000-1995
Diagnostic criteria and principles of management of HIV/AIDS
HIV/AIDS诊断标准及处理原则
GB/T 23107-2008
Household and similar electrical blankets - Methods for measuring performance
家用和类似用途电热毯性能测试方法
GB/T 51064-2015
Technical code for ground treatment of hydraulic fill
吹填土地基处理技术规范
GB/T 25976-2010
Ship and marine technology - Position-indicating lights for life-saving appliances - Testing,inspection and marking of production units
船舶和海上技术 救生设备示位灯 产品的试验、检查和标志
GB/T 1548-2004
Pulps--Determination of viscosity
纸浆 粘度的测定
GB 22573-2008
Maximum limits of chlorobenzene,1,2-dichlorobenzene,1,4-dichlorobenzene,nitrobenzene for irrigation water quality
灌溉水中氯苯、1,2-二氯苯、1,4-二氯苯、硝基苯限量
GB/T 33370-2016
The measuring method for copper and copper alloys soften temperature
铜及铜合金软化温度的测定方法
GB/T 1926.2-1988
Technical furfural test methods
工业糠醛试验方法
GB/T 19905-2005
Liquefied gas tanker
液化气体运输车
GB/T 10256-2013
Radioactivity meter
放射性活度计
GB/T 32041-2015
Implementation guidance for energy management systems in coking industry
焦化行业能源管理体系实施指南
GB/T 4490-2009
Conveyor belts with textile carcass - Widths and lengths
织物芯输送带 宽度和长度
GB/T 16104-1995
Workplace air--Determination of tungsten or tungsten carbide--Potassium thiocyanate-titanous trichloride spectrophotometric method
车间空气中钨或碳化钨的硫氰酸钾-三氯化钛分光光度测定方法
GB 16895.13-2012
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
低压电气装置 第7-701部分:特殊装置或场所的要求 装有浴盆和淋浴的场所
GB/T 16255.3-2008
Test method for the percentage of length of scoured mohair - Array diagram method
洗净马海毛纤维长度试验方法 手排法
GB/T 4797.2-2017
Classification of environmental conditions—Environmental conditions appearing in nature—Air pressure
环境条件分类 自然环境条件 气压
GB/T 12580-1990
Inhibited mineral insulating oils--Determination of oxidation stability
加抑制剂矿物绝缘油氧化安定性测定法
GB/T 13769-2009
Textiles - Test method for assessing the smoothness appearance of fabrics after cleansing
纺织品 评定织物经洗涤后外观平整度的试验方法
GB/T 20439-2006
Graphic technology―Pregress digital data exchange―Input data for characterization of 4-colour process printing
印刷技术 印前数据交换 用于四色印刷特征描述的输入数据
GB/T 30983-2014
Test method for optical properties of photovoltaic glass
光伏用玻璃光学性能测试方法
GB/T 34566-2017
Hot stamping steel sheet and strip for automobile
汽车用热冲压钢板及钢带
GB/T 17677-1999
Equipment for crop protection--Antidrip devices--Determination of performance
植物保护机械 防滴装置 性能测定
GB/T 26312-2010
Gold for evaporating
蒸发金
GB/T 16310.5-1996
Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping --Assessment procedure and determination of pollution category
船舶散装运输液体化学品危害性评价规范 危害性评价程序与污染分类方法
GB/T 33835-2017
Test method of impact strength for friction material
摩擦材料冲击强度试验方法
GB/T 20394-2013
Gymnastic artificial turf
体育用人造草
GB/T 4086.1-1983
Tables for statistical distributions--Normal distribution
统计分布数值表 正态分布
GB/T 21988-2008
Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis in water
塑料 氯乙烯均聚和共聚树脂 水中筛分析
GB/Z 32332.1-2015
Rolling bearings—Explanatory notes on ISO 281—Part 1: Basic dynamic load rating and basic rating life
滚动轴承 对ISO 281的注释 第1部分:基本额定动载荷和基本额定寿命
GB 16895.14-2010
Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters
建筑物电气装置 第7-703部分:特殊装置或场所的要求 装有桑拿浴加热器的房间和小间
GB/T 20958.2-2007
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle
数控床身铣床检验条件 精度检验 第2部分: 立式铣床
GB/T 5782-2000
Hexagon head bolts
六角头螺栓
GB/T 10325-2012
Shaped refractory products-rule of acceptance,sampling and inspection
定形耐火制品验收抽样检验规则
GB/T 16732-1997
Units and symbols of heating ventilation air conditioning and air cleaning equipment in building
建筑采暖通风空调净化设备 计量单位及符号
GB/T 35471-2017
Whiskers for friction material
摩擦材料用晶须
GB/T 17693.5-2009
Transformation guidelines of geographical names from foreign languages into Chinese - Spanish
外语地名汉字译写导则 西班牙语
GB/T 31308.1-2014
Processes, data elements and documents in commerce, industry and administration―Long term signature profiles―Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
商业、工业和行政的过程、数据元和单证 长效签名规范 第1部分:CMS高级电子签名(CAdES)的长效签名规范
GB/T 30475.4-2017
Filters for compressed air—Test methods—Part 4: Water
压缩空气过滤器 试验方法 第4部分:水
GB/T 13781-1992
Textiles--Cotton fibres--Determination of length(span length) and length uniformity
棉纤维长度(跨距长度)和长度整齐度的测定
GB/Z 25458-2010
Rules and procedures for conformity testing and certification of wind turbine generator system
风力发电机组 合格认证规则及程序
GB/T 10799-2008
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
硬质泡沫塑料 开孔和闭孔体积百分率的测定
GB/Z 34066-2017
Control and communicatoin network CIP Safety specification
控制与通信网络CIP Safety规范
GB/T 13477.1-2002
Test method for building sealants--Part 1:Specifications for test substrates
建筑密封材料试验方法 第1部分:试验基材的规定
GB/T 8075-2005
Definition,classification,nomenclature and terms of concrete admixtures
混凝土外加剂定义、分类、命名与术语
GB/T 29752-2013
General technical specification of secure and smart lock for containers
集装箱安全智能锁通用技术规范

Find out:40682Items   |  To Page of: First -Previous-Next -Last  | [24] [25] [26] [27] [28] [29] [30]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved