Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

GB Standards english file list

       
GB/T 20014.25-2010
Good agricultural practice - Part 25: Flowers and ornamentals control points and compliance criteria
良好农业规范 第25部分:花卉和观赏植物控制点与符合性规范
GB/T 17886.3-1999
Shut power capacitor of the non-self-healing type for a.c. systems having arated voltage up to and including 1 kV--Part 3:Internal fuses
标称电压1 kV及以下交流电力系统用非自愈式并联电容器 第3部分:内部熔丝
GB/T 28837-2012
Requirement on services of quarantine treatments of wood packing material
木质包装检疫处理服务质量要求
GB/T 8911-1988
Hygienic determination method of carbon monoxide in air of residential areas--Method of replacing mercury
居住区大气中一氧化碳卫生标准检验方法 汞置换法
GB/T 21483-2008
Marine water jet pump
船用水喷射泵
GB/T 23787-2009
Non-fried vegetable and fruit crisp chips
非油炸水果、蔬菜脆片
GB/T 22270.3-2015
Industrial automation systems and integration—Service interface for testing applications—Part 3: Virtual device service interface
工业自动化系统与集成 测试应用的服务接口 第3部分:虚拟设备服务接口
GB 7000.1-2007
Luminaires - Part 1: General requirements and tests
灯具 第1部分: 一般要求与试验
GB/T 26805.3-2011
Industrial control computer system - Software - Part 3: Guidelines for the document management
工业控制计算机系统 软件 第3部分:文档管理指南
GB 18465-2001
Radiological protection requirements for industrial gamma Defect detecting requirements
工业γ射线探伤放射卫生防护要求
GB/T 34048-2017
Ultraviolet radiometer
紫外辐射表
GB/T 6315-2008
Vernier, dial and digital display universal bevel protractors
游标、带表和数显万能角度尺
GB/T 8434-2013
Textiles - Tests for colour fastness - Colour fastness to milling: Alkaline milling
纺织品 色牢度试验 耐缩呢色牢度:碱性缩呢
GB/T 6730.29-2016
Iron ores—Determination of barium content—Barium sulfate grarimetric method
铁矿石 钡含量的测定 硫酸钡重量法
GB/T 22869-2008
Metal sheet and strip interleaving paper
金属板带衬纸
GB/T 25090-2010
Step-down power saving device for asynchronous motor at light load
电动机轻载调压节电装置
GB/T 14573.4-1993
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 4:Methods for stated values for batches of machines
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第四部分:成批机器标牌值的确定和检验方法
GB/T 32262-2015
Preparation of deoxyribonucleic acid sample for atomic force microscope measurement
用于原子力显微镜检测的脱氧核糖核酸样品的制备方法
GB 17498.9-2008
Stationary training equipment - Part 9: Elliptical trainers - Additional specific safety requirements and test methods
固定式健身器材 第9部分:椭圆训练机 附加的特殊安全要求和试验方法
GB/T 29178-2012
Fire emergency rescue - Guidelines for equipment allocation
消防应急救援 装备配备指南
GB/T 18656-2002
Industrial systems,installations and equipment and industrial products--Identification of terminals within a system
工业系统、装置与设备以及工业产品 系统内端子的标识
GB/T 19739-2005
Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
机械振动与冲击 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法
GB/T 24196-2009
Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则
GB/T 31556.2-2015
Packaging sacks—Description and method of measurement for dimension— Part 2:Sacks made from thermoplastic flexible film
包装袋 尺寸描述和测量方法 第2部分:热塑性软质薄膜袋
GB/T 9411-1988
Performance requirements for airborne marker beacon receiver
机载指点信标接收机性能要求
GB/T 15788-2017
Geosynthetics—Wide-width tensile test
土工合成材料 宽条拉伸试验方法
GB/T 27616-2011
Framework for pest risk analysis
有害生物风险分析框架
GB/T 294-1994
Rolling bearings--Three pointand four point contact ball bearings--Boundary dimensions
滚动轴承 三点和四点接触球轴承 外形尺寸
GB/T 34606-2017
Evaluation method of overall energy-saving performance of building envelope
建筑围护结构整体节能性能评价方法
GB/T 15530.5-2008
Loose piate flange in steel with a plate collar alloy for brazing and welding
铜合金平焊环松套钢法兰
GB/T 8287.1-2008
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 1: Test on insulators of ceramic material or glass
标称电压高于1000V系统用户内和户外支柱绝缘子 第1部分:瓷或玻璃绝缘子的试验
GB/T 10001.10-2014
Public information graphical symbols―Part 10:General symbol elements
公共信息图形符号 第10部分:通用符号要素
GB/T 15651.2-2003
Discrete semiconductor devices and integrated circuits--Part 5-2:Optoelectronic devices--Essential ratings and characteristics
半导体分立器件和集成电路 第5-2部分:光电子器件 基本额定值和特性
GB/T 16462.2-2017
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle
数控车床和车削中心检验条件 第2部分:立式机床几何精度检验
GB/T 20282-2006
Information security technology - Information system security engineering management requirements
信息安全技术 信息系统安全工程管理要求
GB/T 25416-2010
Complete equipment for cottonseed delinting
棉籽脱绒成套设备
GB 4806.4-2016
National Food Safety Standard- Ceramic ware
食品安全国家标准 陶瓷制品
GB/T 4324.9-2012
Methods for chemical analysis of tungsten - Part 9: Determination of cadmium content - Inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
钨化学分析方法 第9部分:镉量的测定 电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法
GB/T 16015-1995
Workplace air--Determination of zinc oxide--Flame atomic absorption spectrophotometric method
车间空气中氧化锌的火焰原子吸收光谱测定方法
GB/T 21834-2008
Medium and low alloy steel - Determination of the distribution of multi-element contents - Original position statistic distribution analysis method
中低合金钢 多元素成分分布的测定 金属原位统计分布分析法
GB/T 24536-2009
Protective clothing - Selection, use, maintenance of chemical protective clothing
防护服装 化学防护服的选择、使用和维护
GB/T 7679.6-2003
Mining machinery terminology--Part6:Screening equipment
矿山机械术语 第6部分:矿用筛分设备
GB/T 35390-2017
Non-destructive testing—Test method of ammunition density by industrial computed tomography(CT)
无损检测 弹药密度工业计算机层析成像(CT)检测方法
GB/T 20820-2007
Product of geographical indication - Tonghua amur-wine
地理标志产品 通化山葡萄酒
GB/T 27936-2011
Publication distribution terminology
出版物发行术语
GB/T 34288-2017
Techincal and installation requirements of boxing ring
拳击台技术与安装要求
GB/T 11902-1989
Water quality--Determination of selenium--Diaminonaphthalene fluorometric method
水质 硒的测定 2,3-二氨基萘荧光法
GB 10010-2009
Plasticized polyvinyl chloride(PVC) tubing for medical uses
医用软聚氯乙烯管材
GB/T 28784.2-2014
Mechanical vibration—Measurement of vibration on ships—Part 2: Measurement of structural vibration
机械振动 船舶振动测量 第2部分:结构振动测量
GB 16392-1996
Diagnostic criteria and principles of management for combined radiation-burn injury
放烧复合伤诊断标准及处理原则
GB 50501-2007
Code of valuation with bill quantity of water conservancy constrution works
水利工程工程量清单计价规范
GB/T 25827-2010
General specification of superalloy plates and strips
高温合金板(带)材通用技术条件
GB/T 32655-2016
LED lighting for plant growth—Terms and definitions
植物生长用LED光照 术语和定义
GB/T 7725-2004
Room air conditioners
房间空气调节器
GB 6853-2008
pH primary reagent - Potassium dihydrogen phosphate
pH 基准试剂 磷酸二氢钾
GB 29968-2013
National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Benzyl cinnamate
食品安全国家标准 食品添加剂 肉桂酸苄酯
GB/T 3798.2-2005
Technical requirements for completion and acceptance of vehicle overhaul Part 2:Goods vehicle
汽车大修竣工出厂技术条件 第2部分:载货汽车
GB/T 24818.5-2009
Cranes - Access,guards and restraints - Part 5: Bridge and gantry cranes
起重机 通道及安全防护设施 第5部分:桥式和门式起重机
GB/T 17649-1998
Duplicating machines--Registration
复印机械-图像印位精度及测量方法
GB 16853-1997
Surveillance standards of tuberculosis
结核病监测规范
GB/T 6159.2-2011
Micrographics - Vocabulary - Part 2: Image positions and methods of recording
缩微摄影技术 词汇 第2部分: 影像的布局和记录方法
GB/T 1710-2008
Comparison of resistance to light of coloured pigments of similar types
同类着色颜料耐光性比较
GB/T 11600-2009
Use on public data networks of data terminal equipment(DTE) which is designed for interfacing to asynchronous duplex V-series MODEMS
与异步双工V系列调制解调器接口的数据终端设备(DTE)在公用数据网上的用法
GB/T 30843.2-2014
Variable-frequency drive above 1kV and not exceeding 35kV—Part 2: Test methods
1 kV 以上不超过 35 kV 的通用变频调速设备 第2部分:试验方法
GB 50981-2014
Code for seismic design of mechanical and electrical equipment
建筑机电工程抗震设计规范
GB/T 20643.1-2006
Special environmental condition - Environmental test method - Part 1: General and guidance
特殊环境条件 环境试验方法 第1部分:总则
GB/T 13270-1991
Atmospheric air--Test dust standardsample--Simulated atmospheric dust
大气 试验粉尘标准样品 模拟大气尘
GB/T 26175-2010
Test method to determine the kinetic energy of projectile toys
弹射玩具动能测试方法
GB/T 18025-2000
Agricultural irrigation--Wiring and equipment for electrically driven or controlled irrigation machines
农业灌溉设备 电动或电控灌溉机械的电气设备和布线
GB/T 33273-2016
Textiles—Determination of triclosan residues
纺织品 三氯生残留量的测定
GB/T 4702.1-1997
Methods for chemical analysis of chromium metal--The ammonium ferrous sulfate volumetric method for thedetermination of chromium content
金属铬化学分析方法 硫酸亚铁铵容量法测定铬量
GB/T 1655-2013
Sulphur Black 3B、4B、3BR、2RB(Sulphur Black BN、BRN、B2RN、RN)
硫化黑3B、4B、3BR、2RB(硫化黑BN、BRN、B2RN、RN)
GB/T 31932-2015
Method for electromagnetic automatic ultrasonic testing for thicker steel plates
厚钢板电磁超声自动检测方法
GB/T 22195-2008
Electrical installations in ships - Low-voltage switchgear and controlgear assemblies
船舶电气设备 设备 低压开关设备和控制设备组合装置
GB/T 9455-2009
Feed additive - Vitamin AD3 beadlets
饲料添加剂 维生素AD3微粒
GB/T 21150-2007
stall regulation wind turbine generator system
失速型风力发电机组
GB 28881-2012
Hand protection - Protective gloves against chemicals and micro-organisms
手部防护 化学品及微生物防护手套
GB/T 18569.1-2001
Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 1:Principles and specifications for machinery manufacturers
机械安全 减小由机械排放的危害性物质对健康的风险 第1部分:用于机械制造商的原则和规范
GB/T 18972-2017
Classification,investigation and evaluation of tourism resources
旅游资源分类、调查与评价
GB/T 15722-2009
Competitive qualification of medical stardard of volleyballsitting for disabled athletes
残疾人坐地排球运动员参赛资格的医学标准
GB/T 31186.1-2014
Specification of description for basic information of bank's customer―Part 1: Model of description
银行客户基本信息描述规范 第1部分:描述模型
GB/T 34397-2017
Management criterion of pallet pool system
托盘共用系统管理规范
GB/T 6276.5-2010
Determination of ammonium hydrogen carbonate for industrial use - Part 5: Ash content - Gravimetric method
工业用碳酸氢铵的测定方法 第5部分:灰分含量 重量法
GB/T 4965-1985
Classification and designation for getter
吸气剂分类及型号命名方法
GB/T 17454.3-2017
Safety of machinery—Pressure-sensitive protective devices—Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
机械安全 压敏保护装置 第3部分:压敏缓冲器、压敏板、压敏线及类似装置的设计和试验通则
GB/T 12417.1-2008
Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 1: Particular requirements for osteosynthesis implants
无源外科植入物 骨接合与关节置换植入物 第1部分:骨接合植入物特殊要求
GB/T 7583-1987
Acoustics--Pure tone air conductionthreshold audio-metry--For hearing conservation purposes
声学 纯音气导听阈测定 听力保护用
GB/T 29584-2013
Detection and identification of Cladosporium cucumerinum Ell. et Arthur
黄瓜黑星病菌检疫鉴定方法
GB/T 7568.4-2002
Textiles--Tests for colour fastness--Specification for polyester adjacent fabric
纺织品 色牢度试验 聚酯标准贴衬织物规格
GB/T 5838.45-2015
Phosphors—Part 4-5 : Phosphor for color display tubes
荧光粉 第4-5部分:彩色显示管用荧光粉
GB 20517-2006
self-contained smoke alarms
独立式感烟火灾探测报警器
GB 25577-2010
National Food Safety Standard-Food Additives-Titanium dioxide
食品安全国家标准 食品添加剂 二氧化钛
GB/T 17359-2012
Microbeam analysis - Quantitative analysis using energy dispersive spectrometry
微束分析 能谱法定量分析
GB/T 35110-2017
Target optimization methods for marine shale gas exploration
海相页岩气勘探目标优选方法
GB/T 18882.2-2008
Chemical analysis methods for mixed rare earth oxide of ion-absorpted type RE ore - Determination of aluminum oxide content
离子型稀土矿混合稀土氧化物化学分析方法 三氧化二铝量的测定
GB/T 22766.4-2009
After-sales service for household and similar electrical appliances - Part4:Particular requirements for washing machines
家用和类似用途电器售后服务 第4部分:洗衣机的特殊要求
GB/Z 31102-2014
Software engineering―Guide to the software engineering body of knowledge (SWEBOK)
软件工程 软件工程知识体系指南
GB/T 1996-2003
Coke for metallurgy
冶金焦炭
GB/T 34502-2017
Gold-coated silver and silver alloy bonding wires for semiconductor package
封装键合用镀金银及银合金丝
GB/T 5340.2-2006
End mill with indexable inserts - Part 2: End mill with Morse taper shank
可转位立铣刀 第2部分:莫氏锥柄立铣刀

Find out:40682Items   |  To Page of: First -Previous-Next -Last  | [374] [375] [376] [377] [378] [379] [380]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved