Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

GB Standards english file list

       
GB/T 29061-2012
Performance films for glass in building
建筑玻璃用功能膜
GB/T 798-1988
Eye bolts
活节螺栓
GB/T 23990-2009
Determination of the contents of benzene,toluene,ethylbenzene and xylene in coatings by gas chromatography
涂料中苯、甲苯、乙苯和二甲苯含量的测定 气相色谱法
GB 19533-2004
Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
汽车用压缩天然气钢瓶定期检验与评定
GB/T 31461-2015
Guide for run back and fast cut back control in fossil fuel power plant
火力发电机组快速减负荷控制技术导则
GB/T 27511-2011
35mm filmstrips - Specifications for double-frame and single-frame formats
35mm幻灯片 双画幅和单画幅规范
GB/T 11848.1-2008
Methods for analysis of uranium ore concentrate - Part 1: Determination of uranium by ferrous sulfate reducion potassion dichromate titrimetry
铀矿石浓缩物分析方法 第1部分:硫酸亚铁还原-重铬酸钾滴定法测定铀
GB/T 7673.1-2008
Paper covered wires - Part 1: General requirements
纸包绕组线 第1部分: 一般规定
GB 15037-2006
Wines
葡萄酒
GB/T 34228-2017
Dipped heat-resistant canvas―Test method for adhesion strength at high temperature
耐热浸胶帆布 高温粘合性能试验方法
GB 30877-2014
Information technology—Universal multi-octet coded character set—Mongolian nominal characters and presentation forms—48 dot matrix font—XiaoJing Ti
信息技术 通用多八位编码字符集 蒙古文名义字符与变形显现字符 48点阵字型 孝经体
GB/T 25315-2010
Home control systems - Guidelines relating to safety
家庭控制系统 安全导则
GB 50317-2009
Code for design of pig's slaughtering and cutting rooms
猪屠宰与分割车间设计规范
GB 19510.12-2005
Lamp controlgear--Part 12:Particular requirements for miscellaneous electronic circuits used with luminaires
灯的控制装置 第12部分:与灯具联用的杂类电子线路的特殊要求
GB/T 32708-2016
Safety requirements for laboratory instrument and equipment—Autoclave
实验室仪器及设备安全规范 反应釜
GB/T 29434-2012
Aluminum alloy ingots for high strength and toughness castings with heat resisting
耐热高强韧铸件用铝合金锭
GB/T 18578-2008
Specifications for designing urban geographic information system
城市地理信息系统设计规范
GB 13004-1999
Periodic inspection and evaluation of seamless steel gas cylinders
钢质无缝气瓶定期检验与评定
GB/T 24423-2009
Information and documentation - Paper for documents - Requirements for permanence
信息与文献 文献用纸 耐久性要求
GB/T 4169.5-2006
Components of injection moulds for plastics - Part 5: Shouldered guide pillar
塑料注射模零件 第5部分:带肩导柱
GB/T 27837-2011
Test method for hazard classification of formic acid and formic acid mixtures
甲酸及其混合物危险特性分类方法
GB/T 9766.1-2008
Test method for tyre valves - Part 1: Test method for clamp-in valves
轮胎气门嘴试验方法 第1部分:压紧式内胎气门嘴试验方法
GB/T 19933.6-2014
Earth-moving machinery―Operator enclosure environment―Part 6: Determination of effect of solar heating
土方机械 司机室环境 第6部分:太阳光热效应的测定
GB/T 22428.1-2008
Starch hydrolysis products - Determination of reducing power and dextrose equivalent
淀粉水解产品 还原力和葡萄糖当量测定
GB/T 18271.1-2000
Process measurement and control devices--General methods and procedures for evaluating performance--Part 1:General considerations
过程测量和控制装置 通用性能评定方法和程序 第1部分:总则
GB/T 25724-2010
Technical specification of surveillance video and audio coding
安全防范监控数字视音频编解码技术要求
GB 51048-2014
Design code for electrochemical energy storage station
电化学储能电站设计规范
GB/T 1687-1993
Rubber,vulcanized--Determination of temperature rise and resistance to fafigue in flexometer testing--Part 2:Compression flexometer
硫化橡胶在屈挠试验中温升和耐疲劳性能的测定 第二部分:压缩屈挠试验
GB/T 4127.8-2007
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging
固结磨具 尺寸 第8部分:去毛刺、荒磨和粗磨用砂轮
GB/T 33314-2016
Corrosion control engineering life cycle—General requirements
腐蚀控制工程生命周期 通用要求
GB 19726.1-2013
Machinery for forestry―Portable chain-saw safety requirements and testing―Part 1: Chain-saws for forest service
林业机械 便携式油锯安全要求和试验 第1部分:林用油锯
GB/T 11161-1989
Dial and scale of electrical instruments
电测量仪表标度盘与标度尺
GB/T 24730-2009
General technical conditions for detachable grip of passenger ropeway
客运索道脱挂抱索器通用技术条件
GB/T 31979-2015
Steel wire ropes—Determination of rotational properties
钢丝绳 旋转性能测定方法
GB/T 9019-2001
Nominal diameter of pressure vessels
压力容器公称直径
GB/T 28196-2011
Determination of annealing point and strain point for glass
玻璃退火点和应变点测试方法
GB 15980-1995
Hygienic standard of disinfection for single use medical products
一次性使用医疗用品卫生标准
GB/T 13772.2-2008
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
纺织品 机织物接缝处纱线抗滑移的测定 第2部分:定负荷法
GB 24820-2009
Laboratory furniture - General technical requirements
实验室家具通用技术条件
GB/T 1409-2006
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法
GB 16487.2-2017
Environmental protection control standard for imported solid wastes as raw materials—Smelt slag
进口可用作原料的固体废物环境保护控制标准—冶炼渣
GB/T 30743-2014
Technical guidelines for treatment with red tide disaster
赤潮灾害处理技术指南
GB/T 26066-2010
practice for shallow etch pit detection on silicon
硅晶片上浅腐蚀坑检测的测试方法
GB/T 34658-2017
Conformance test for communication protocols between off-board conductive charger and battery management system for electric vehicle
电动汽车非车载传导式充电机与电池管理系统之间的通信协议一致性测试
GB/T 33829-2017
Test method for snow grip performance of passenger car tyres
轿车轮胎雪地抓着性能试验方法
GB 19107-2003
Requirements of packing for sodium hypochloritesolution
次氯酸钠溶液包装要求
GB/T 13006-2013
NPSH for centrifugal,mixed flow and axial flow pumps
离心泵、混流泵和轴流泵 汽蚀余量
GB/T 16085-1995
Workplace air--Determination of dichloroethane--Direct injection gas chromatographic method(Apiezon L)
车间空气中二氯乙烷的直接进样气相色谱测定方法(Apiezon L)
GB/T 21413.3-2008
Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
铁路应用 机车车辆电气设备 第3部分: 电工器件 直流断路器规则
GB/T 6379.6-2009
Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
测量方法与结果的准确度(正确度与精密度) 第6部分:准确度值的实际应用
GB/T 7759.1-2015
Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1: At ambient or elevated temperatures
硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分:在常温及高温条件下
GB 17625.2-2007
Eiectromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection
电磁兼容 限值 对每相额定电流≤16A且无条件接入的设备在公用低压供电系统中产生的电压变化、电压波动和闪烁的限制
GB/T 12678-1990
Reliability running test method for automobiles
汽车可靠性行驶试验方法
GB 28313-2012
National Food Safety Standard - Food Additive - Grape Skin Extract
食品安全国家标准 食品添加剂 葡萄皮红
GB/T 14395-2009
Coding rules for urban geographical features - City roads, road intersections, blocks and municipal pipe lines
城市地理要素编码规则 城市道路、道路交叉口、街坊、市政工程管线
GB/T 5687.4-1985
Methods for chemical analysis of ferrochromium--The neutralization titration method for the determination of nitrogen content
铬铁化学分析方法 中和滴定法测定氮量
GB/T 35257-2017
Textiles—Quantitative chemical analysis—Mixtures of chitosan and certain other fibers(method using acetic acid)
纺织品 定量化学分析 壳聚糖纤维与某些其他纤维的混合物 (乙酸法)
GB/T 5009.124-2003
Determination of amino acids in foods
食品中氨基酸的测定
GB/T 31068-2014
Requirements for security systems in regular higher education institutions
普通高等学校安全技术防范系统要求
GB/T 16261-1996
Generic specification of printed boards
印制板总规范
GB/T 22764.1-2008
Cabinets for low-voltage switchgear - Part 1: Generic specification
低压机柜 第1部分:总规范
GB/T 26443-2010
Safety colours and safety signs - Classification, performance and durability of safety signs
安全色和安全标志 安全标志的分类、性能和耐久性
GB/T 4678.1-2017
Diecasting dies—Components—Part 1: Die plates
压铸模 零件 第1部分:模板
GB 14536.10-2008
Automatic electrical controls for household and similar use - Particular requirements for temperature sensing controls
家用和类似用途电自动控制器 温度敏感控制器的特殊要求
GB/T 19633-2005
Packaging for terminally sterilized medical devices
最终灭菌医疗器械的包装
GB/T 34121-2017
Technical specification for relay protection configuration tool in smart substation
智能变电站继电保护配置工具技术规范
GB/T 2915-2013
Determination of conductivity of water extract of polyvinyl chloride resins
聚氯乙烯树脂 水萃取液电导率的测定
GB 25115.4-2010
Safety requirements for industrial laundry machinery - Part 4: Air dryers
工业洗涤机械的安全要求 第4部分:烘干机
GB/T 23656-2016
Rubber compounding ingredients—Determination of surface area for silica,precipitated,hydrated—CTAB method
橡胶配合剂 沉淀水合二氧化硅比表面积的测定 CTAB法
GB/T 19531.3-2004
Technical requirement for the observational environment of seismic stations--Part 3:Crustal deformation observation
地震台站观测环境技术要求 第3部分:地壳形变观测
GB/T 12864-1997
Piezoelectric ceramic filters for use in electronic equipment--A specification in the quality assessment system for electronic components--Part 2:Sectional specification--Qualification approval
电子设备用压电陶瓷滤波器 电子元器件质量评定体系规范 第2部分:分规范 鉴定批准
GB/T 13963-2012
Electrostatic copying (including multifunction) devices terminology
静电复印(包括多功能)设备 术语
GB/T 15076.16-2008
Methods for chemical analysis of tantalum and niobium - Determination of sodium and potassium contents
钽铌化学分析方法 钠量和钾量的测定
GB/T 13856-1992
Specification for 4GHz band microwave service channel equipment
4 GHz微波联络机技术条件
GB/T 18874.3-2009
Cranes - Information to be provided - Part 3: Tower cranes
起重机 供需双方应提供的资料 第3部分:塔式起重机
GB/T 20192-2006
Universal technical specifications for pellet mill
环模制粒机通用技术规范
GB/T 5019.5-2014
Insulating materials based on mica―Part 5: Rigid mica materials for heating equipment
以云母为基的绝缘材料 第5部分:电热设备用云母板
GB 18467-2011
Whole blood and component donor selection requirements
献血者健康检查要求
GB 17203-1998
Food additive--Calcium citrate
食品添加剂 柠檬酸钙
GB/T 27304-2008
Food safety management system - Requirements for fish and fishery product processing establishments
食品安全管理体系 水产品加工企业要求
GB/T 7182-1987
Measurement of noise in engine room of diesel locomotives
铁路内燃机车动力室噪声测量
GB 50187-2012
Code for design of general layout of industrial enterprises
工业企业总平面设计规范
GB/T 29832.2-2013
Reliability of system and software - Part 2: Metric method
系统与软件可靠性 第2部分:度量方法
GB/T 21759-2008
Chemicals - Test method of chronic toxicity
化学品 慢性毒性试验方法
GB 1445-2000
White soft sugar
绵白糖
GB/T 10051.7-2010
Lifting hooks - Part7: Ramshorn shank hooks
起重吊钩 第7部分:直柄双钩
GB/T 32986-2016
Determination of nine anti-allergy drugs in cosmetics—LC-MS/MS
化妆品中多西拉敏等9种抗过敏药物的测定 液相色谱-串联质谱法
GB/T 18311.16-2007
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分:检查和测量 球面抛光套管端面半径
GB/T 28256-2012
Trapezoidal taps
梯形螺纹丝锥
GB/T 23349-2009
Ecological index of arsenic,cadmium,lead,chromium and mercury for fertilizers
肥料中砷、镉、铅、铬、汞生态指标
GB 30604-2015
National food safety standard — Food nutritional fortification substance —
食品安全国家标准 食品营养强化剂 1,3-二油酸-2-棕榈酸甘油三酯
GB/T 23211-2008
Determination of 493 pesticides and related chemicals residues in milk and milk powder - LC-MS-MS method
牛奶和奶粉中493种农药及相关化学品残留量的测定 液相色谱-串联质谱法
GB 4877-1985
Intermediate frequencies of television
电视中间频率
GB/T 12598-2001
Determination for sphericity of ion exchange resins after attrition or osmotic-attrition
离子交换树脂渗磨圆球率、磨后圆球率的测定
GB/T 16417-2011
Method for evaluating the washability of coal
煤炭可选性评定方法
GB 4706.57-2008
Household and similar electrical appliances - Safety - Particular requirements for floor treatment machines and wet scrubbing machines
家用和类似用途电器的安全 地板处理机和湿式擦洗机的特殊要求
GB/T 4213-2008
Pneumatic industrial process control valves
气动调节阀
GB/T 20015-2005
Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
金属和其它无机覆盖层 电镀镍、自催化镀镍、电镀铬及最后精饰 自动控制喷丸硬化前处理
GB/T 34880.2-2017
Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine
五轴联动加工中心检验条件 第2部分:立式机床精度检验
GB/T 30220-2013
Amusement device safety use management
游乐设施安全使用管理

Find out:40682Items   |  To Page of: First -Previous-Next -Last  | [47] [48] [49] [50] [51] [52] [53]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved