China Rubber and plastic h GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 英文版 |
 |
|
|
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 22530-2022 Safety requirements for rubber and plastic injection molding machines 橡胶塑料注射成型机安全要求 - 英文版 |
|
|
|
GB/T 42279-2022 Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 - 英文版 |
|
|
|
GB/T 41931-2022 Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 - 英文版 |
|
|
|
GB/T 40719-2021 Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 - 英文版 |
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 英文版 |
|
|
|
GB/T 38687-2020 Rubber and plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 - 英文版 |
|
|
|
GB/T 25156-2020 General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 - 英文版 |
|
|
|
GB/T 38533-2020 Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 - 英文版 |
|
|
|
GB/T 39692-2020 Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 - 英文版 |
|
|
|
GB/T 39483.2-2020 Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 - 英文版 |
|
|
|
GB/T 39483.1-2020 Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 - 英文版 |
|
|
|
GB/T 39327-2020 Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 - 英文版 |
|
|
|
GB/T 39249-2020 Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 - 英文版 |
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 12585-2020 Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） - 英文版 |
|
|
|
GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 - 英文版 |
|
|
|
GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 - 英文版 |
|
|
|
GB/T 9576-2019 Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 36587-2018 Rubber and plastics machinery—Terminology 橡胶塑料机械 术语 - 英文版 |
|
|
|
GB/T 5565.2-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 - 英文版 |
|
|
|
GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 - 英文版 |
|
|
|
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 - 英文版 |
|
|
|
GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 - 英文版 |
|
|
|
GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) - 英文版 |
|
|
|
GB/T 33580-2017 Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 - 英文版 |
|
|
|
GB/T 32476-2016 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 - 英文版 |
|
|
|
GB/T 32456-2015 General specifications for electromagnetic of induction heating energy-saving systems used for rubber and plastics machines 橡胶塑料机械用电磁加热节能系统通用技术条件 - 英文版 |
|
|
|
GB/T 11210-2014 Rubber, vulcanized or thermoplastic―Antistatic and conductive products―Determination of electrical resistance 硫化橡胶或热塑性橡胶 抗静电和导电制品 电阻的测定 - 英文版 |
|
|
|
GB/T 3512-2014 Rubber, vulcanized or thermoplastic―Accelerated ageing and heat resistance tests 硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验 - 英文版 |
|
|
|
GB/T 30200-2013 Test method for energy consumption of rubber and plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 - 英文版 |
|
|
|
GB/T 9572-2013 Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 - 英文版 |
|
|
|
GB/T 5568-2013 Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 5567-2013 Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 - 英文版 |
|
|
|
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 - 英文版 |
|
|
|
GB/T 18422-2013 Rubber and plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 - 英文版 |
|
|
|
GB 29993-2013 Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 - 英文版 |
|
|
|
GB/T 9576-2013 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 9575-2013 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 - 英文版 |
|
|
|
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 - 英文版 |
|
|
|
GB/T 18423-2013 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 - 英文版 |
|
|
|
GB/T 28605-2012 Rubber and plastics tubing and hoses and hose assemblies for drinking water 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件 - 英文版 |
|
|
|
GB 25936.3-2012 Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders 橡胶塑料粉碎机械 第3部分：切碎机安全要求 - 英文版 |
|
|
|
GB 25936.2-2012 Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers 橡胶塑料粉碎机械 第2部分：拉条式切粒机安全要求 - 英文版 |
|
|
|
GB 25936.1-2012 Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators 橡胶塑料粉碎机械 第1部分：刀片式破碎机安全要求 - 英文版 |
|
|
|
GB/T 7528-2011 Rubber and plastics hoses and hose assemblies - Vocabulary 橡胶和塑料软管及软管组合件 术语 - 英文版 |
|
|
|
GB/T 14904-2011 Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 - 英文版 |
|
|
|
GB 25936.4-2010 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators 橡胶塑料粉碎机械 第4部分：团粒机安全要求 - 英文版 |
|
|
|
GB 25431.3-2010 Extruders and extrusion lines for rubber and plastics - Part 3：Safety requirements for haul-offs 橡胶塑料挤出机和挤出生产线 第3部分：牵引装置的安全要求 - 英文版 |
|
| Find out:104Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
