China Determination of bon GB Standards Search Result |
![]() |
1. Ready translated GB standards ![]() 2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
![]() |
GB/T 44027.2-2024 Determination method of carbon materials - Part 2: Determination of expansion rate 炭材料测定方法-第2部分:膨胀率的测定 - 英文版 |
![]() |
![]() |
GB/T 44027.1-2024 Carbon material determination methods - Part 1: Determination of first discharge specific capacity, first coulomb efficiency, and retention rate of discharge capacity at different rates 炭材料测定方法-第1部分:首次放电比容量、首次库仑效率、不同倍率放电容量保持率的测定 - 英文版 |
![]() |
![]() |
GB/T 43905.2-2024 Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分:电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 - 英文版 |
![]() |
![]() |
GB/T 43603.3-2024 Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method - 镍铂靶材合金化学分析方法-第3部分:碳含量的测定-高频红外检测法- - 英文版 |
![]() |
![]() |
GB/T 43598-2023 Nanotechnology Determination of oxygen content and carbon-to-oxygen ratio of graphene powder X-ray photoelectron spectroscopy 纳米技术 石墨烯粉体氧含量和碳氧比的测定 X射线光电子能谱法 - 英文版 |
![]() |
![]() |
GB/T 43282.1-2023 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法 - 英文版 |
![]() |
![]() |
GB/T 5686.5-2023 Ferromanganese, manganese-silicon alloy, ferromanganese nitride and metallic manganese Determination of carbon content Infrared absorption method, gas volume method, gravimetric method and coulometric method 锰铁、锰硅合金、氮化锰铁和金属锰 碳含量的测定 红外线吸收法、气体容量法、重量法和库仑法 - 英文版 |
![]() |
![]() |
GB/T 23101.4-2023 Surgical implants Hydroxyapatite Part 4: Determination of coating bond strength 外科植入物 羟基磷灰石 第4部分:涂层粘结强度的测定 - 英文版 |
![]() |
![]() |
GB/T 3394-2023 Determination of trace amounts of carbon monoxide, carbon dioxide and acetylene in ethylene and propylene for industrial use - Gas chromatography 工业用乙烯、丙烯中微量一氧化碳、二氧化碳和乙炔的测定 气相色谱法 - 英文版 |
![]() |
![]() |
GB/T 3392-2023 Determination of hydrocarbon impurities in propylene for industrial use - Gas chromatography 工业用丙烯中烃类杂质的测定 气相色谱法 - 英文版 |
![]() |
![]() |
GB 5009.283-2021 National food safety standards Determination of azocarbonamide in food 食品安全国家标准 食品中偶氮甲酰胺的测定 - 英文版 |
![]() |
![]() |
GB 5009.265-2021 National food safety standards Determination of polycyclic aromatic hydrocarbons in food 食品安全国家标准 食品中多环芳烃的测定 - 英文版 |
![]() |
![]() |
GB/T 8038-2023 Coked toluene - Determination of hydrocarbon impurity content - Gas chromatography 焦化甲苯 烃类杂质含量的测定 气相色谱法 - 英文版 |
![]() |
![]() |
GB/T 3780.30-2023 Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method 炭黑 第30部分:高温挥发物的测定 热重法 - 英文版 |
![]() |
![]() |
GB/T 29493.4-2023 Determination of harmful substances in textile dyeing and finishing auxiliaries Part 4: Determination of polycyclic aromatic hydrocarbons (PAHs) 纺织染整助剂中有害物质的测定 第4部分:多环芳烃化合物(PAHs)的测定 - 英文版 |
![]() |
![]() |
GB/T 26203-2023 Paper and paperboard - Determination of internal bond strength (Scott type) 纸和纸板 内结合强度的测定(Scott型) - 英文版 |
![]() |
![]() |
GB/T 23961-2023 Determination of low-carbon fatty amine content by gas chromatography 低碳脂肪胺含量的测定 气相色谱法 - 英文版 |
![]() |
![]() |
GB/T 42794-2023 Nickel iron - Determination of carbon, sulfur, silicon, phosphorus, nickel, cobalt, chromium and copper content - Spark source atomic emission spectrometry 镍铁 碳、硫、硅、磷、镍、钴、铬和铜含量的测定 火花源原子发射光谱法 - 英文版 |
![]() |
![]() |
GB/T 11064.9-2023 Methods for chemical analysis of lithium carbonate, lithium hydroxide monohydrate, and lithium chloride Part 9: Determination of sulfate content Barium sulfate turbidity method 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第9部分:硫酸根含量的测定 硫酸钡浊度法 - 英文版 |
![]() |
![]() |
GB/T 35306-2023 Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法 - 英文版 |
![]() |
![]() |
GB/T 42670-2023 Determination method of Rockwell hardness of carbon materials 炭素材料洛氏硬度测定方法 - 英文版 |
![]() |
![]() |
GB/T 13021-2023 Polyolefin pipes and fittings - Determination of carbon black content - Calcination and pyrolysis methods 聚烯烃管材和管件 炭黑含量的测定 煅烧和热解法 - 英文版 |
![]() |
![]() |
GB/T 28189-2023 Textiles - Determination of polycyclic aromatic hydrocarbons 纺织品 多环芳烃的测定 - 英文版 |
![]() |
![]() |
GB/T 11064.2-2023 Lithium carbonate, lithium hydroxide monohydrate, lithium chloride chemical analysis methods - Part 2: Determination of lithium hydroxide content - acid-base titration 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第2部分:氢氧化锂含量的测定 酸碱滴定法 - 英文版 |
![]() |
![]() |
GB/T 7702.7-2023 Test methods for coal-based granular activated carbon-Part 7: Determination of iodine adsorption value 煤质颗粒活性炭试验方法 第7部分:碘吸附值的测定 - 英文版 |
![]() |
![]() |
GB/T 26416.7-2023 Chemical analysis methods of rare earth iron alloys - Part 7: Determination of carbon and sulfur content - High frequency-infrared absorption method 稀土铁合金化学分析方法 第7部分:碳、硫量的测定 高频-红外吸收法 - 英文版 |
![]() |
![]() |
GB/T 6730.51-2023 Iron ores - Determination of carbon content in carbonates - Caustic soda asbestos absorption gravimetric method 铁矿石 碳酸盐中碳含量的测定 烧碱石棉吸收重量法 - 英文版 |
![]() |
![]() |
GB/T 42490-2023 Soil quality Determination of organic carbon content and carbon isotope ratio, total nitrogen content and nitrogen isotope ratio in soil and biological samples Stable isotope ratio mass spectrometry 土壤质量 土壤与生物样品中有机碳含量与碳同位素比值、全氮含量与氮同位素比值的测定 稳定同位素比值质谱法 - 英文版 |
![]() |
![]() |
GB/T 26749-2022 Carbon fiber - Determination of tensile properties of impregnated yarn 碳纤维 浸胶纱拉伸性能的测定 - 英文版 |
![]() |
![]() |
GB/T 31290-2022 Carbon fibers - Determination of tensile properties of monofilaments 碳纤维 单丝拉伸性能的测定 - 英文版 |
![]() |
![]() |
GB/T 29761-2022 Carbon fiber - Determination of sizing agent content 碳纤维 上浆剂含量的测定 - 英文版 |
![]() |
![]() |
GB/T 22459.4-2022 Refractory mortars—Part 4: Determination of flexural bonding strength 耐火泥浆 第4部分:常温抗折粘接强度试验方法 - 英文版 |
![]() |
![]() |
GB/T 12690.1-2022 Chemical analysis methods for non-rare earth impurities in rare earth metals and their oxides—Part 1: Determination of carbon and sulfur content—High frequency-infrared absorption method 稀土金属及其氧化物中非稀土杂质化学分析方法 第1部分:碳、硫量的测定 高频-红外吸收法 - 英文版 |
![]() |
![]() |
GB/T 41956-2022 Determination of fluff amount of carbon fiber tow 碳纤维丝束起毛量的测定 - 英文版 |
![]() |
![]() |
GB/T 3780.29-2022 Carbon black - Part 29: Determination of solvent extractables 炭黑 第29部分:溶剂可萃取物的测定 - 英文版 |
![]() |
![]() |
GB/T 42275-2022 Cemented carbide - Determination of total carbon content - High frequency combustion infrared absorption method/thermal conductivity method 硬质合金 总碳量的测定 高频燃烧红外吸收法/热导法 - 英文版 |
![]() |
![]() |
GB/T 6730.61-2022 Iron ore - Determination of carbon and sulfur content - High frequency combustion infrared absorption method 铁矿石 碳和硫含量的测定 高频燃烧红外吸收法 - 英文版 |
![]() |
![]() |
GB/T 41709-2022 Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 - 英文版 |
![]() |
![]() |
GB/T 41762.2-2022 Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分:弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 - 英文版 |
![]() |
![]() |
GB/T 3488.4-2022 Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases 硬质合金 显微组织的金相测定 第4部分:孔隙度、非化合碳缺陷和脱碳相的金相测定 - 英文版 |
![]() |
![]() |
GB/T 11132-2022 Determination of hydrocarbons in liquid petroleum products - Fluorescence indicator adsorption method 液体石油产品烃类的测定 荧光指示剂吸附法 - 英文版 |
![]() |
![]() |
GB/T 41733-2022 Determination of carbon residue in organic heat carrier Nitrogen filling method 有机热载体残炭测定法 充氮法 - 英文版 |
![]() |
![]() |
GB/T 40367-2021 Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 - 英文版 |
![]() |
![]() |
GB/T 39715.2-2021 Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分:生物基碳含量的测定 - 英文版 |
![]() |
![]() |
GB/T 14949.11-2021 Manganese ores—Determination of carbon content—Gravimetric method and infrared absorption method 锰矿石 碳含量的测定 重量法和红外线吸收法 - 英文版 |
![]() |
![]() |
GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method 钨铁 碳含量的测定 红外线吸收法 - 英文版 |
![]() |
![]() |
GB/T 6017-2021 Determination of purity and hydrocarbon impurities of butadiene for industrial use—Gas chromatographic method 工业用丁二烯纯度及烃类杂质的测定 气相色谱法 - 英文版 |
![]() |
![]() |
GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 - 英文版 |
![]() |
![]() |
GB/T 41071-2021 Determination of polycyclic aromatic hydrocarbons in dye products 染料产品中多环芳烃的测定 - 英文版 |
![]() |
![]() |
GB/T 29614-2021 Vulcanized rubber—Determination the content of polycyclic aromatic hydrocarbons 硫化橡胶 多环芳烃含量的测定 - 英文版 |
![]() |
Find out:427Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 |