China Method for pressure GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 6881.2-2017 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法 - 英文版 |
 |
|
|
GB/T 9252-2017 Method for pressure cycling test of gas cylinders 气瓶压力循环试验方法 - 英文版 |
|
|
|
GB/T 34544-2017 Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles 小型燃料电池车用低压储氢装置安全试验方法 - 英文版 |
|
|
|
GB 26149-2017 Performance requirements and test methods of tire pressure monitoring system for passenger cars 乘用车轮胎气压监测系统的性能要求和试验方法 - 英文版 |
|
|
|
GB/T 20441.5-2017 Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison 电声学 测量传声器 第5部分：工作标准传声器声压校准的比较法 - 英文版 |
|
|
|
GB/T 33896-2017 Test method for cyclic pressure of membrane housing 分离膜外壳循环压力试验方法 - 英文版 |
|
|
|
GB/T 33928-2017 Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 - 英文版 |
|
|
|
GB/T 33922-2017 Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances MEMS压阻式压力敏感芯片性能的圆片级试验方法 - 英文版 |
|
|
|
GB/T 24218.16-2017 Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) 纺织品 非织造布试验方法 第16部分：抗渗水性的测定(静水压法) - 英文版 |
|
|
|
GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 - 英文版 |
|
|
|
GB/T 33488.4-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 - 英文版 |
|
|
|
GB/T 33488.1-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 - 英文版 |
|
|
|
GB/T 33488.3-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 - 英文版 |
|
|
|
GB/T 33488.2-2017 Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 - 英文版 |
|
|
|
GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method 电工电子产品着火危险试验 第21部分：非正常热 球压试验方法 - 英文版 |
|
|
|
GB/T 5170.10-2017 Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 - 英文版 |
|
|
|
GB/T 33291-2016 Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides 氢化物可逆吸放氢压力-组成-等温线（P-C-T）测试方法 - 英文版 |
|
|
|
GB/T 32491-2016 Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 - 英文版 |
|
|
|
GB/T 3767-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 - 英文版 |
|
|
|
GB/T 32524.2-2016 Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 - 英文版 |
|
|
|
GB/T 32524.1-2016 Acoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分：半消声室精密法 - 英文版 |
|
|
|
GB/T 32523-2016 Acoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—Travelling wave tube method 声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法 - 英文版 |
|
|
|
GB/T 6882-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms 声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法 - 英文版 |
|
|
|
GB/T 8243.13-2015 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 - 英文版 |
|
|
|
GB/T 1859.3-2015 Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms 往复式内燃机 声压法声功率级的测定 第3部分：半消声室精密法 - 英文版 |
|
|
|
GB/T 15478-2015 Test methods of the performances for pressure transducer/sensor 压力传感器性能试验方法 - 英文版 |
|
|
|
GB/T 25151.6-2014 Fabrication and inspection method for high pressure urea equipment―Part 6: Helium leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第6部分：尿素高压设备氦渗漏试验方法 - 英文版 |
|
|
|
GB/T 30048-2013 Test method for characteristic of pressure filtration of slime 煤泥压滤性试验方法 - 英文版 |
|
|
|
GB/T 29918-2013 Method for measuring pressure-composition isotherms of RE-base AB5 hydrogen storage alloys 稀土系AB5型贮氢合金压力-组成等温线（PCI）的测试方法 - 英文版 |
|
|
|
GB/T 29907-2013 Test method for watertightness of curtain walls under dynamic wind pressure 建筑幕墙动态风压作用下水密性能检测方法 - 英文版 |
|
|
|
GB/T 4744-2013 Textiles - Testing and evaluation for water resistance - Hydrostatic pressure method 纺织品 防水性能的检测和评价 静水压法 - 英文版 |
|
|
|
GB/T 29459.2-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 - 英文版 |
|
|
|
GB/T 29459.1-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 - 英文版 |
|
|
|
GB/T 8017-2012 Standard test method for vapor pressure of petroleum products (Reid Method) 石油产品蒸气压的测定 雷德法 - 英文版 |
|
|
|
GB/T 15623.3-2012 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 - 英文版 |
|
|
|
GB/T 28474.2-2012 Pressure/Differential-pressure transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用压力/差压变送器 第2部分：性能评定方法 - 英文版 |
|
|
|
GB/T 11059-2011 Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) 原油蒸气压的测定 膨胀法 - 英文版 |
|
|
|
GB/T 26729-2011 Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods 农业灌溉设备 地表灌溉用聚氯乙烯（PVC）低压管 技术规范和试验方法 - 英文版 |
|
|
|
GB/T 6536-2010 Standard test method for distillation of petroleum products at atmospheric pressure 石油产品常压蒸馏特性测定法 - 英文版 |
|
|
|
GB/T 25151.5-2010 Fabrication and inspection method for high pressure urea equipment - Part 5: Ammonia leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第5部分：尿素高压设备氨渗漏试验方法 - 英文版 |
|
|
|
GB/T 25151.4-2010 Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取 - 英文版 |
|
|
|
GB/T 25151.3-2010 Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第3部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验 - 英文版 |
|
|
|
GB/T 25151.2-2010 Fabrication and inspection method for high pressure urea equipment - Part 2: Selective corrosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第2部分：尿素级超低碳铬镍钼奥氏体不锈钢选择性腐蚀检查和金相检查 - 英文版 |
|
|
|
GB/T 25151.1-2010 Fabrication and inspection method for high pressure urea equipment - Part 1: Ultrasonic examination on the automatic strip overlay welds of stainless steel 尿素高压设备制造检验方法 第1部分：不锈钢带极自动堆焊层超声波检测 - 英文版 |
|
|
|
GB/T 25132-2010 Hydraulic fluid power - Filters - Test method for differential pressure devices 液压过滤器 压差装置试验方法 - 英文版 |
|
|
|
GB/T 23711.6-2009 Hydrostatic pressure test Method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 压力试验方法 - 英文版 |
|
|
|
GB/T 23711.5-2009 Expansion and contraction test Method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 热胀冷缩试验方法 - 英文版 |
|
|
|
GB/T 23711.4-2009 Vacuum test Method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐真空试验方法 - 英文版 |
|
|
|
GB/T 23711.3-2009 High temperature test Method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐高温试验方法 - 英文版 |
|
|
|
GB/T 23711.2-2009 Low temperature test Method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐低温试验方法 - 英文版 |
|
| Find out:142Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
