China Plastics. Determinat GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 41792-2022 Plastics - Films and sheets - Determination of cold cracking temperature 塑料制品 薄膜和薄片 冷裂温度的测定 - 英文版 |
 |
|
|
GB/T 41709-2022 Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 - 英文版 |
|
|
|
GB/T 41877.2-2022 Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 - 英文版 |
|
|
|
GB/T 41878-2022 Plastics - Determination of scratch properties 塑料 划痕性能的测定 - 英文版 |
|
|
|
GB/T 41880-2022 Plastics - epoxy resins - determination of electrical conductivity of aqueous extracts 塑料 环氧树脂 水萃取液电导率的测定 - 英文版 |
|
|
|
GB/T 41758.2-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 40611-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法 - 英文版 |
|
|
|
GB/T 40384-2021 Plastics—Determination of the transient extensional viscosity of polymer melts 塑料 聚合物熔体瞬态拉伸黏度的测定 - 英文版 |
|
|
|
GB/T 40426.3-2021 Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 - 英文版 |
|
|
|
GB/T 40426.2-2021 Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 - 英文版 |
|
|
|
GB/T 40367-2021 Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 - 英文版 |
|
|
|
GB/T 40302-2021 Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 - 英文版 |
|
|
|
GB/T 40280-2021 Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 - 英文版 |
|
|
|
GB/T 39715.4-2021 Plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 - 英文版 |
|
|
|
GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 - 英文版 |
|
|
|
GB/T 39715.2-2021 Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 - 英文版 |
|
|
|
GB/T 33047.3-2021 Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 - 英文版 |
|
|
|
GB/T 33047.2-2021 Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 - 英文版 |
|
|
|
GB/T 15596-2021 Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 - 英文版 |
|
|
|
GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 - 英文版 |
|
|
|
GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 - 英文版 |
|
|
|
GB/T 39935-2021 Plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 - 英文版 |
|
|
|
GB/T 39934-2021 Plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 - 英文版 |
|
|
|
GB/T 39827.2-2021 Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 - 英文版 |
|
|
|
GB/T 39821-2021 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 - 英文版 |
|
|
|
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 - 英文版 |
|
|
|
GB/T 10006-2021 Plastics—Film and sheeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 - 英文版 |
|
|
|
GB/T 24282-2021 Plastics—Determination of xylene-soluble matter fraction in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 - 英文版 |
|
|
|
GB/T 40726-2021 Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 - 英文版 |
|
|
|
GB/T 30314-2021 Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 - 英文版 |
|
|
|
GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 - 英文版 |
|
|
|
GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 - 英文版 |
|
|
|
GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 - 英文版 |
|
|
|
GB/T 39691-2020 Plastics—Determination of refractive index 塑料 折光率的测定 - 英文版 |
|
|
|
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 - 英文版 |
|
|
|
GB/T 18252-2020 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 - 英文版 |
|
|
|
GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 - 英文版 |
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 12009.5-2016 (Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 - 英文版 |
|
|
|
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 1634.2-2019 Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 - 英文版 |
|
|
|
GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 - 英文版 |
|
|
|
GB/T 37196-2018 Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 - 英文版 |
|
| Find out:332Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |
+86-755-2583-1330
