Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Test methods for par GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
     
GB/T 10394.3-2002
Forage harvesters--Part 3:Test methods
饲料收获机 第3部分:试验方法 - 英文版
GB/T 9966.7-2001
Test methods for natural facing stones--Part 7:Test method for strength of individual stone anchorages
天然饰面石材试验方法 第7部分:检测板材挂件组合单元挂装强度试验方法 - 英文版
GB/T 9966.6-2001
Test methods for natural facing stones--Part 6:Test method for acid resistance
天然饰面石材试验方法 第6部分:耐酸性试验方法 - 英文版
GB/T 9966.5-2001
Test methods for natural facing stones--Part 5:Test method for shore hardness
天然饰面石材试验方法 第5部分:肖氏硬度试验方法 - 英文版
GB/T 9966.4-2001
Test methods for natural facing stones--Part 4:Test method for abrasion resistance
天然饰面石材试验方法 第4部分:耐磨性试验方法 - 英文版
GB/T 9966.3-2001
Test methods for natural facing stones--Part 3:Test methods for bulk density,true density,true porosity and water absorption
天然饰面石材试验方法 第3部分:体积密度、真密度、真气孔率、吸水率试验方法 - 英文版
GB/T 9966.2-2001
Test methods for natural facing stones--Part 2:Dry and wet test methods for flexural strength
天然饰面石材试验方法 第2部分:干燥、水饱和弯曲强度试验方法 - 英文版
GB/T 9966.1-2001
Test methods for natural facing stones--Part 1:Dry,wet and after freezing testmethods for compressive strength
天然饰面石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验方法 - 英文版
GB/T 16850.7-2001
Basic specification for optical fibre amplifier test methods--Part 7:Test methods for out-of-band insertion losses
光纤放大器试验方法基本规范 第7部分:带外插入损耗的试验方法 - 英文版
GB/T 16850.6-2001
Basic specification for optical fibre amplifier test methods--Part 6:Test methods for pump leakage parameters
光纤放大器试验方法基本规范 第6部分:泵浦泄漏参数的试验方法 - 英文版
GB/T 16850.5-2001
Basic specification for optical fibre amplifier test methods--Part 5:Test methods for reflectance parameters
光纤放大器试验方法基本规范 第5部分:反射参数的试验方法 - 英文版
GB/T 18271.3-2000
Process measurement and control devices--General methods and procedures for evaluating performance--Part 3:Tests for the effects of influence quantities
过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验 - 英文版
GB/T 18271.2-2000
Process measurement and control devices--General methods and procedures for evaluating performance--Part 2:Tests under reference conditions
过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验 - 英文版
GB/T 2424.25-2000
Environmental testing for electric and electronic products--Part 3:Test guidance--Seismic test methods
电工电子产品环境试验 第3部分:试验导则 地震试验方法 - 英文版
GB/T 18214.1-2000
Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results
全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果 - 英文版
GB/T 17849-1999
Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法 - 英文版
GB/T 16850.3-1999
Basic specification for optical fibre amplifier test methods--Part 3:Test methods for noisefigure parameters
光纤放大器试验方法基本规范 第3部分:噪声参数的试验方法 - 英文版
GB/T 16850.2-1999
Basic specification for optical fibre amplifier test methods--Part 2:Test methods for powerparameters
光纤放大器试验方法基本规范 第2部分:功率参数的试验方法 - 英文版
GB/T 6261-1998
Fixed capacitors for use in electronic equipment--Part 5:Sectional specification--Fixed mica dielectric d.c.capacitors witha rated voltage not exceeding 3000V--Selection of methods of test and generalrequirements
电子设备用固定电容器 第5部分:分规范 额定电压不超过3000伏的直流云母介质固定电容器试验方法的选择和一般要求 - 英文版
GB/T 5095.9-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9:Miscellaneous tests
电子设备用机电元件 基本试验规程及测量方法 第9部分:杂项试验 - 英文版
GB/T 5095.8-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8:Connector tests(mechanical)and mechanical tests on contacts and terminations
电子设备用机电元件 基本试验规程及测量方法 第8部分:连接器、接触件及引出端的机械试验 - 英文版
GB/T 5095.7-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 7:Mechanical operating tests and sealing tests
电子设备用机电元件 基本试验规程及测量方法 第7部分:机械操作试验和密封性试验 - 英文版
GB/T 5095.6-1997
Electromechanical components for electronic equipment--Basic testing proceduresand measuring methods--Part 6:Climatic tests and soldering tests
电子设备用机电元件 基本试验规程及测量方法 第6部分:气候试验和锡焊试验 - 英文版
GB/T 5095.5-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components),static load tests(fixed components),endurance tests and overload tests
电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验 - 英文版
GB/T 5095.4-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests
电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验 - 英文版
GB/T 5095.3-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests
电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验 - 英文版
GB/T 5095.2-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination,electrical continuity and contact resistance tests,insulationtests and voltage stress tests
电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验 - 英文版
GB/T 5095.15-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application
电子设备用机电元件 基本试验规程及测量方法 第15部分:接触件和引出端的机械试验 第八篇:试验15h接触件固定机构耐工具使用性 - 英文版
GB/T 5095.12-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering
电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂 - 英文版
GB/T 5095.1-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuringmethods--Part 1:General
电子设备用机电元件 基本试验规程及测量方法 第1部分:总则 - 英文版
GB/T 5095.11-1997
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 11:Climatic tests
电子设备用机电元件 基本试验规程及测量方法 第11部分:气候试验 - 英文版
GB/T 2423.49-1997
Environmental testing for electric and electronic products--Part 2:Test methods--Test Fe:Vibration--Sine-beat method
电工电子产品环境试验 第2部分:试验方法 试验Fe:振动----正弦拍频法 - 英文版
GB/T 2423.47-1997
Environmental testing for electric and electronic products--Part 2:Test methods--Test Fg:Vibration,acoustically induced
电工电子产品环境试验 第2部分:试验方法 试验Fg:声振 - 英文版
GB/T 12307.3-1997
Metalliccoatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3:Determination of the presence of residual salts
金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定 - 英文版
GB/T 12305.6-1997
Metalliccoating--Test methods for electrodeposited gold and gold alloy coatings--Part 6:Determination of the presence of residual salts
金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定 - 英文版
GB/T 16850.1-1997
Basic specification for optical fibre amplifier test methods--Part 1:Test methods for gain parameters
光纤放大器试验方法基本规范 第1部分:增益参数的试验方法 - 英文版
GB/T 16601-1996
Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test
光学表面激光损伤阈值测试方法 第1部分:1对1测试 - 英文版
GB/T 16513-1996
Fixed inductors for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements
抑制射频干扰固定电感器 第2部分 分规范 试验方法和一般要求的选择 - 英文版
GB/T 15891-1995
Radio frequency cables--Part 4:Specification for superscreened cables--Section 1:General require-ments and test methods
射频电缆 第四部分:超屏蔽电缆规范 第一篇:一般要求和试验方法 - 英文版
GB/T 15868-1995
Shipborne radio equipment forming part of the (globalmaritime distress and safety system) and marine navigational equipment--General require-ments,methods of testing and required test results
全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果 - 英文版
GB/T 15727-1995
Methods for thermal shock test oflaboratory apparatus glass (stick method)
实验室仪器玻璃热冲击试验方法(棒状法) - 英文版
GB/T 2423.5-1995
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ea and guidance:Shock
电工电子产品环境试验 第二部分:试验方法 试验Ea和导则:冲击 - 英文版
GB/T 2423.8-1995
Environmentaltesting for electric and electronic products--Part 2:Test methods--Test Ed:Free fall
电工电子产品环境试验 第二部分:试验方法 试验Ed:自由跌落 - 英文版
GB/T 2423.7-1995
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ec and guidance:Drop and topple (Primarily for equipment-type specimens)
电工电子产品环境试验 第二部分:试验方法 试验Ec和导则:倾跌与翻倒 (主要用于设备型样品) - 英文版
GB/T 2423.6-1995
Environmental testing for electric and electronic products--Part 2:Test methods--Test Eb and guidance:Bump
电工电子产品环境试验 第二部分:试验方法 试验Eb和导则:碰撞 - 英文版
GB/T 13823.16-1995
Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison
振动与冲击传感器的校准方法 温度响应比较测试法 - 英文版
GB/T 15288-1994
Complete filter units for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements
抑制射频干扰整件滤波器 第二部分:分规范 试验方法的选择和一般要求 - 英文版
GB/T 13953-1992
Test methods of explosion-proof performance for explosion-proof applied TV equipment with separate type
隔爆型防爆应用电视设备防爆性能试验方法 - 英文版
GB/T 6730.1-1986
Methods for chemical analysis of iron ores--Preparation of predried test samples for chemical analysis
铁矿石化学分析方法 分析用预干燥试样的制备 - 英文版
GB/T 5441.6-1985
Test methods for communication cable--Crosstalk attenuation test--Comparison method
通信电缆试验方法 串音衰减试验 比较法 - 英文版

Find out:1000Items   |  To Page of: First -Previous-Next -Last  | [14] [15] [16] [17] [18] [19] [20]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved