China Determination of est GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 英文版 |
 |
|
|
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 - 英文版 |
|
|
|
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 英文版 |
|
|
|
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 - 英文版 |
|
|
|
GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 - 英文版 |
|
|
|
GB/T 39827.2-2021 Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 17421.10-2021 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 - 英文版 |
|
|
|
GB/T 12736-2021 Conveyor belts—Determination of strenght of mechanical fastenings—Static test method 输送带 机械接头强度的测定 静态试验方法 - 英文版 |
|
|
|
GB/T 7991.1-2021 Test method of viterous and porcelain enamels—Part 1：Determination of resistance to alkaline liquids 搪玻璃层试验方法 第1部分：耐碱性溶液腐蚀性能的测定 - 英文版 |
|
|
|
GB/T 41104.2-2021 Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定 - 英文版 |
|
|
|
GB/T 38265.13-2021 Test methods for soft soldering fluxes—Part 13: Determination of flux spattering 软钎剂试验方法 第13部分：钎剂溅散性的测定 - 英文版 |
|
|
|
GB/T 7991.3-2021 Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分：耐温差急变性能的测定 - 英文版 |
|
|
|
GB/T 1927.20-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 - 英文版 |
|
|
|
GB/T 1927.19-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 - 英文版 |
|
|
|
GB/T 1927.18-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定 - 英文版 |
|
|
|
GB/T 1927.17-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 - 英文版 |
|
|
|
GB/T 1927.12-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 - 英文版 |
|
|
|
GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 - 英文版 |
|
|
|
GB/T 1927.9-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 - 英文版 |
|
|
|
GB/T 1927.8-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定 - 英文版 |
|
|
|
GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分：密度的测定 - 英文版 |
|
|
|
GB/T 1927.7-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定 - 英文版 |
|
|
|
GB/T 1927.6-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 - 英文版 |
|
|
|
GB/T 1927.5-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分：密度测定 - 英文版 |
|
|
|
GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定 - 英文版 |
|
|
|
GB/T 1927.3-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 - 英文版 |
|
|
|
GB/T 41223-2021 Soil quality—Determination of potential nitrification and inhibition of nitrification—Rapid test by ammonium oxidation 土壤质量 硝化潜势和硝化抑制作用的测定 氨氧化快速检测法 - 英文版 |
|
|
|
GB/T 29493.1-2021 Determination of harmful substances in textile dyeing and finishing auxiliaries -- Part 1: Determination of the prohibited or restricted flame retardants 纺织染整助剂中有害物质的测定 第1部分：禁限用阻燃剂的测定 - 英文版 |
|
|
|
GB/T 40938-2021 Leather—Physical and mechanical tests—Determination of water penetration pressure 皮革 物理和机械试验 水渗透压测定 - 英文版 |
|
|
|
GB/T 40927-2021 Leather—Physical and mechanical tests—Determination of heat resistance of patent leather 皮革 物理和机械试验 漆皮耐热性能的测定 - 英文版 |
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 英文版 |
|
|
|
GB/T 40906-2021 Methods for the determination of prohibited substances in furniture products and related materials—Certain phthalate esters 家具产品及其材料中禁限用物质测定方法 邻苯二甲酸酯增塑剂 - 英文版 |
|
|
|
GB/T 23801-2021 Determination of fatty acid methyl ester (FAME) content in middle distillates—Infrared spectrometry 中间馏分油中脂肪酸甲酯含量的测定 红外光谱法 - 英文版 |
|
|
|
GB/T 6683.1-2021 Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test 石油及相关产品 测量方法与结果精密度 第1部分：试验方法精密度数据的确定 - 英文版 |
|
|
|
GB/T 1687.4-2021 Rubber,vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 4: Constant-stress flexometer 硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第4部分：恒应力屈挠试验 - 英文版 |
|
|
|
GB/T 40830-2021 Code of practice for the determination of feed true ileal digestible amino acids for pigs (Simple T-cannulation) 猪饲料真可消化氨基酸测定技术规程(简单T型瘘管法) - 英文版 |
|
|
|
GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 40936-2021 Leather—Physical and mechanical tests—Determination of water repellency of garment leather 皮革 物理和机械试验 服装革防水性能的测定 - 英文版 |
|
|
|
GB/T 9098-2021 Methods for the determination of prohibited substances in furniture products and related materials—Certain phthalate esters 电冰箱用全封闭型电动机-压缩机 - 英文版 |
|
|
|
GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area 皮革 物理和机械试验 视密度和单位面积质量的测定 - 英文版 |
|
|
|
GB/T 39507-2020 Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法 - 英文版 |
|
|
|
GB/T 39520-2020 Test method for determination the residual stress of spring by X-ray diffraction 弹簧残余应力的X射线衍射测试方法 - 英文版 |
|
|
|
GB/T 39221-2020 Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method 反渗透海水淡化阻垢剂阻垢性能试验 周期浓缩循环法 - 英文版 |
|
|
|
GB/T 28599-2020 Determination of phthalate esters in cosmetics 化妆品中邻苯二甲酸酯类物质的测定 - 英文版 |
|
|
|
GB/T 4893.2-2020 Test of surface coatings of furniture—Part 2: Determination of resistance to wet heat 家具表面漆膜理化性能试验 第2部分：耐湿热测定法 - 英文版 |
|
|
|
GB/T 4893.3-2020 Test of surface coatings of furniture—Part 3: Determination of resistance to dry heat 家具表面漆膜理化性能试验 第3部分：耐干热测定法 - 英文版 |
|
|
|
GB/T 24328.6-2020 Tissue paper and tissue products—Part 6: Determination of water-absorption time and water-absorption capacity—Basket-immersion test method 卫生纸及其制品 第6部分: 吸水时间和吸水能力的测定 篮筐浸没法 - 英文版 |
|
|
|
GB/T 39076-2020 Textiles—Determination of neonicotinoid pesticide residues 纺织品 新烟碱类农药残留的测定 - 英文版 |
|
|
|
GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 - 英文版 |
|
|
|
GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 - 英文版 |
|
| Find out:1027Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 |
+86-755-2583-1330
