China Determination of tur GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 39719-2020 Field and concentrated natural rubber latices—Determination of magnesium content—Cyanide-free titrimetric method 新鲜和浓缩天然胶乳镁含量的测定滴定法（无氰法） - 英文版
	GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物第2部分：试样制备和性能测定 - 英文版
	GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method 精细陶瓷高温和超高温弹性模量的测定缺口环相对法 - 英文版
	GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) 硫化橡胶低温性能的测定温度回缩程序（TR 试验） - 英文版
	GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶低温刚性的测定（吉门试验） - 英文版
	GB/T 39544-2020 Natural rubber latex concentrate—Determination of total phosphate content—Spectrophotometric method 浓缩天然胶乳总磷酸盐含量的测定分光光度法 - 英文版
	GB/Z 6113.403-2020 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products 无线电骚扰和抗扰度测量设备和测量方法规范第4-3部分：不确定度、统计学和限值建模批量产品的EMC符合性确定的统计考虑 - 英文版
	GB/T 39422-2020 Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 - 英文版
	GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 英文版
	GB/T 5832.4-2020 Gas analysis—Determination of moisture—Part 4: The method of quartz crystal oscillation 气体分析微量水分的测定第4部分：石英晶体振荡法 - 英文版
	GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶压缩应力松弛的测定第2部分：循环温度下试验 - 英文版
	GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶压缩应力松弛的测定第2部分：循环温度下试验 - 英文版
	GB/T 38016-2019 Textiles—Determination of moisture drying rate 纺织品干燥速率的测定 - 英文版
	GB/T 37829-2019 Iron ore fines in bulk—Determination of transportable moisture limits—Flow-table method 散装铁矿粉适运水分限量的测定流盘试验法 - 英文版
	GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR) 天然生胶技术分级橡胶（TSR）凝胶含量的测定 - 英文版
	GB/T 13477.13-2019 Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable temperatures 建筑密封材料试验方法第13部分：冷拉-热压后粘结性的测定 - 英文版
	GB/T 8293-2019 Rubber latex, natural concentrate—Determination of sludge content 浓缩天然胶乳残渣含量的测定 - 英文版
	GB/T 8086-2019 Rubber, raw natural—Determination of dirt content 天然生胶杂质含量的测定 - 英文版
	GB/T 1634.2-2019 Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料负荷变形温度的测定第2部分：塑料和硬橡胶 - 英文版
	GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料负荷变形温度的测定第1部分:通用试验方法 - 英文版
	GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature 烧结金属材料室温压缩强度的测定 - 英文版
	GB/T 16430-2018 Determination of the minimum ignition temperature of dust layer 粉尘层最低着火温度测定方法 - 英文版
	GB/T 34247.2-2018 Determination of the unsaturation of isobutene-isoprene rubber—Part 2:1H-NMR method 异丁烯-异戊二烯橡胶（IIR）不饱和度的测定-第2部分：核磁共振氢谱法 - 英文版
	GB/T 13477.12-2018 Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature 建筑密封材料试验方法-第12部分：同一温度下拉伸-压缩循环后粘结性的测定 - 英文版
	GB/T 36214.4-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料体积排除色谱法测定聚合物的平均分子量和分子量分布第4部分：高温法 - 英文版
	GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料体积排除色谱法测定聚合物的平均分子量和分子量分布第3部分：低温法 - 英文版
	GB/T 34474.2-2018 Determination of banded structure of steel—Part 2: Quantitative method 钢中带状组织的评定第2部分：定量法 - 英文版
	GB/T 6730.2-2018 Iron ores—Determination of moisture content—Gravimetric method 铁矿石水分含量的测定重量法 - 英文版
	GB/T 3488.2-2018 Hardmetals—Metallographic determination of microstructure—Part 2：Measurement of WC grain size 硬质合金显微组织的金相测定第2部分：WC晶粒尺寸的测量 - 英文版
	GB/T 36794-2018 Determination of shear adhesion failure temperature of adhesive tape 胶粘带剪切破坏温度的测定 - 英文版
	GB/T 36877-2018 Determination of impact peel strength of structural adhesives — Wedge method 结构胶粘剂冲击剥离强度的测定楔形物法 - 英文版
	GB/T 36800.2-2018 Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定 - 英文版
	GB/T 14949.8-2018 Manganese ores—Determination of hygroscopic moisture content—Gravimetric method 锰矿石湿存水量的测定重量法 - 英文版
	GB/T 11060.3-2018 Natural gas─Determination of sulfur compound─Part 3:Determination of hydrogen sulfide content by lead acetate reaction rate dual photo path method 天然气含硫化合物的测定第3部分：用乙酸铅反应速率双光路检测法测定硫化氢含量 - 英文版
	GB/T 35924-2018 Determination of moisture in solid chemical products－Thermogravimetry method 固体化工产品中水分含量的测定热重法 - 英文版
	GB/T 36055-2018 Method for analysis of forestry biomass—Determination of moisture content 林业生物质原料分析方法含水率的测定 - 英文版
	GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 - 英文版
	GB/T 35818-2018 Standard method for analysis of forestry biomass－Determination of structural polysaccharides and lignin 林业生物质原料分析方法多糖及木质素含量的测定 - 英文版
	GB/T 7602.4-2017 Quantitative determination of T501 oxidation inhibitor content in transformer oil or turbine oil—Part 4: GC/MS method 变压器油、涡轮机油中T501抗氧化剂含量测定法第4部分：气质联用法 - 英文版
	GB/T 2930.8-2017 Rules of seed testing for forage, turfgrass and other herbaceous plant—Determination of moisture content 草种子检验规程水分测定 - 英文版
	GB/T 2930.3-2017 Rules of seed testing for forage, turfgrass and other herbaceous plant—Determination of other seeds by number 草种子检验规程其他植物种子数测定 - 英文版
	GB/T 2930.9-2017 Rules of seed testing for forage, turfgrass and other herbaceous plant—Weight determination 草种子检验规程重量测定 - 英文版
	GB/T 34727-2017 Determination of turtles germplasm 龟类种质测定 - 英文版
	GB/T 34482-2017 Determination of thermal transmittance for architecture aluminium alloy thermal barrier profiles 建筑用铝合金隔热型材传热系数测定方法 - 英文版
	GB/T 6730.3-2017 Iron ores—Determination of hygroscopic moisture in analytical samples—Gravimetric, Karl Fischer and mass-loss methods 铁矿石分析样中吸湿水分的测定重量法、卡尔费休法和质量损失法 - 英文版
	GB/T 34474.1-2017 Determination of banded structure of steel—Part1：Micrographic method using standards diagrams 钢中带状组织的评定第1部分：标准评级图法 - 英文版
	GB/T 34483-2017 β transus temperature determination methods of zirconium and zirconium alloys 锆及锆合金β相转变温度测定方法 - 英文版
	GB/T 34536-2017 Natural gas—Determination of radon concentration—Scintillation flash method 天然气氡浓度的测定闪烁瓶法 - 英文版
	GB/T 3002-2017 Refractory products—Determination of modulus of rupture at elevated temperatures 耐火材料高温抗折强度试验方法 - 英文版
	GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature 耐火材料常温抗折强度试验方法 - 英文版

Find out:494Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10