China Plastic - Determinat GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 30314-2021 Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 - 英文版 |
 |
|
|
GB/T 40719-2021 Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 - 英文版 |
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 英文版 |
|
|
|
GB/T 40797-2021 Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 - 英文版 |
|
|
|
GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 39506-2020 Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content 硬聚氯乙烯（PVC-U）管材及管件中聚氯乙烯（PVC）含量的测定 基于总氯含量的方法 - 英文版 |
|
|
|
GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 - 英文版 |
|
|
|
GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 - 英文版 |
|
|
|
GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） - 英文版 |
|
|
|
GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 - 英文版 |
|
|
|
GB/T 39693.6-2020 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/T 39691-2020 Plastics—Determination of refractive index 塑料 折光率的测定 - 英文版 |
|
|
|
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 - 英文版 |
|
|
|
GB/T 18252-2020 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 - 英文版 |
|
|
|
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 英文版 |
|
|
|
GB/T 39307-2020 Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring 荧光增白剂 色光和增白强度的测定 塑料着色法 - 英文版 |
|
|
|
GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal 胶粘剂粘接强度的测定 金属与塑料 - 英文版 |
|
|
|
GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 - 英文版 |
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 12585-2020 Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） - 英文版 |
|
|
|
GB/T 38292-2019 Determination of mercury in plastic materials 塑料材料中汞含量的测定 - 英文版 |
|
|
|
GB/T 38291-2019 Determination of lead in plastic materials 塑料材料中铅含量的测定 - 英文版 |
|
|
|
GB/T 38290-2019 Determination of cadmium in plastic materials 塑料材料中镉含量的测定 - 英文版 |
|
|
|
GB/T 38287-2019 Determination of hexavalent chromium in plastic materials 塑料材料中六价铬含量的测定 - 英文版 |
|
|
|
GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 7755.2-2019 Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 - 英文版 |
|
|
|
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 - 英文版 |
|
|
|
GB/T 12009.5-2016 (Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 - 英文版 |
|
|
|
GB/T 38292-2019 Determination of mercury in plastic materials 塑料材料中汞含量的测定 - 英文版 |
|
|
|
GB/T 38291-2019 Determination of lead in plastic materials 塑料材料中铅含量的测定 - 英文版 |
|
|
|
GB/T 38290-2019 Determination of cadmium in plastic materials 塑料材料中镉含量的测定 - 英文版 |
|
|
|
GB/T 38287-2019 Determination of hexavalent chromium in plastic materials 塑料材料中六价铬含量的测定 - 英文版 |
|
|
|
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 7755.2-2019 Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 - 英文版 |
|
|
|
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 - 英文版 |
|
|
|
GB/T 37897-2019 Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method 纤维增强塑料复合材料 平板扭曲法测定面内剪切模量 - 英文版 |
|
|
|
GB/T 1634.2-2019 Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 - 英文版 |
|
|
|
GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 - 英文版 |
|
|
|
GB/T 37639-2019 Determination of polybrominated biphenyls and polybrominated diphenyl ethers in plastic products—Gas chromatography and mass spectrometry 塑料制品中多溴联苯和多溴二苯醚的测定 气相色谱-质谱法 - 英文版 |
|
|
|
GB/T 37638-2019 Determination of polybrominated biphenyls and polybrominated biphenyl ethers in plastic products—High performance liquid chromatography 塑料制品中多溴联苯和多溴二苯醚的测定 高效液相色谱法 - 英文版 |
|
|
|
GB/T 37196-2018 Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 - 英文版 |
|
|
|
GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 37194.2-2018 Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 - 英文版 |
|
|
|
GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles 塑料-拉伸性能的测定-第1部分：总则 - 英文版 |
|
|
|
GB/T 2408-2008/XG1-2018 Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 - 英文版 |
|
|
|
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 - 英文版 |
|
|
|
GB/T 36214.4-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 - 英文版 |
|
| Find out:464Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 |
+86-755-2583-1330
