Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Plastic - Determinat GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
     
GB/T 30314-2021
Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader
橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 - 英文版
GB/T 40719-2021
Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity
硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 - 英文版
GB/T 39693.9-2021
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
硫化橡胶或热塑性橡胶 硬度的测定 第9部分:硬度计的校准和验证 - 英文版
GB/T 40797-2021
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method
硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 - 英文版
GB/T 22271.2-2021
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定 - 英文版
GB/T 39506-2020
Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content
硬聚氯乙烯(PVC-U)管材及管件中聚氯乙烯(PVC)含量的测定 基于总氯含量的方法 - 英文版
GB/T 8813-2020
Rigid cellular plastics—Determination of compression properties
硬质泡沫塑料 压缩性能的测定 - 英文版
GB/T 38737-2020
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production
塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 - 英文版
GB/T 39714.2-2020
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
塑料 聚四氟乙烯(PTFE)半成品 第2部分:试样制备和性能测定 - 英文版
GB/T 39690.2-2020
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2:Preparation of test specimens and determination of properties
塑料 源自柔性和刚性消费品包装的聚丙烯(PP)和聚乙烯(PE)回收混合物 第2部分:试样制备和性能测定 - 英文版
GB/T 6036-2020
Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test)
硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验) - 英文版
GB/T 1632.4-2020
Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials
塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分:聚碳酸酯(PC)模塑和挤出材料 - 英文版
GB/T 39693.6-2020
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method
硫化橡胶或热塑性橡胶 硬度的测定 第6部分:IRHD法测定胶辊的表观硬度 - 英文版
GB/T 39691-2020
Plastics—Determination of refractive index
塑料 折光率的测定 - 英文版
GB/T 39385-2020
Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
塑料管道系统 热塑性塑料管材 环柔性的测定 - 英文版
GB/T 18252-2020
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 - 英文版
GB/T 39484-2020
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach
纤维增强塑料复合材料 用校准端载荷分裂试验(C-ELS)和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 英文版
GB/T 39307-2020
Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring
荧光增白剂 色光和增白强度的测定 塑料着色法 - 英文版
GB/T 39289-2020
Determination of the adhesion strength—Plastic and metal
胶粘剂粘接强度的测定 金属与塑料 - 英文版
GB/T 36805.2-2020
Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
塑料 高应变速率下的拉伸性能测定 第2部分:直接测试法 - 英文版
GB/T 14905-2020
Rubber and plastics hoses—Determination of adhesion between components
橡胶和塑料软管 各层间粘合强度的测定 - 英文版
GB/T 12585-2020
Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique)
硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法) - 英文版
GB/T 38292-2019
Determination of mercury in plastic materials
塑料材料中汞含量的测定 - 英文版
GB/T 38291-2019
Determination of lead in plastic materials
塑料材料中铅含量的测定 - 英文版
GB/T 38290-2019
Determination of cadmium in plastic materials
塑料材料中镉含量的测定 - 英文版
GB/T 38287-2019
Determination of hexavalent chromium in plastic materials
塑料材料中六价铬含量的测定 - 英文版
GB/T 38273.2-2019
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分:试样制备和性能测定 - 英文版
GB/T 38271-2019
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中残留苯乙烯单体含量的测定 气相色谱法 - 英文版
GB/T 7755.2-2019
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods
硫化橡胶或热塑性橡胶 透气性的测定 第2部分:等压法 - 英文版
GB/T 1685.2-2019
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling
硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分:循环温度下试验 - 英文版
GB/T 12009.5-2016
(Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1)
塑料 聚氨酯生产用芳香族异氰酸酯 第5部分:酸度的测定《第1号修改单》 - 英文版
GB/T 38292-2019
Determination of mercury in plastic materials
塑料材料中汞含量的测定 - 英文版
GB/T 38291-2019
Determination of lead in plastic materials
塑料材料中铅含量的测定 - 英文版
GB/T 38290-2019
Determination of cadmium in plastic materials
塑料材料中镉含量的测定 - 英文版
GB/T 38287-2019
Determination of hexavalent chromium in plastic materials
塑料材料中六价铬含量的测定 - 英文版
GB/T 38271-2019
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中残留苯乙烯单体含量的测定 气相色谱法 - 英文版
GB/T 7755.2-2019
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods
硫化橡胶或热塑性橡胶 透气性的测定 第2部分:等压法 - 英文版
GB/T 1685.2-2019
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling
硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分:循环温度下试验 - 英文版
GB/T 37897-2019
Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method
纤维增强塑料复合材料 平板扭曲法测定面内剪切模量 - 英文版
GB/T 1634.2-2019
Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite
塑料 负荷变形温度的测定 第2部分:塑料和硬橡胶 - 英文版
GB/T 1634.1-2019
Plastics—Determination of temperature of deflection under load—Part 1:General test method
塑料 负荷变形温度的测定 第1部分:通用试验方法 - 英文版
GB/T 37639-2019
Determination of polybrominated biphenyls and polybrominated diphenyl ethers in plastic products—Gas chromatography and mass spectrometry
塑料制品中多溴联苯和多溴二苯醚的测定 气相色谱-质谱法 - 英文版
GB/T 37638-2019
Determination of polybrominated biphenyls and polybrominated biphenyl ethers in plastic products—High performance liquid chromatography
塑料制品中多溴联苯和多溴二苯醚的测定 高效液相色谱法 - 英文版
GB/T 37196-2018
Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones
塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 - 英文版
GB/T 37199.2-2018
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
塑料-聚丁烯(PB)模塑和挤出材料-第2部分:试样制备和性能测定 - 英文版
GB/T 37194.2-2018
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 - 英文版
GB/T 1040.1-2018
Plastics—Determination of tensile properties—Part 1:General principles
塑料-拉伸性能的测定-第1部分:总则 - 英文版
GB/T 2408-2008/XG1-2018
Plastics - Determination of burning characteristics - Horizontal and vertical test
《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 - 英文版
GB/T 36214.5-2018
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分:光散射法 - 英文版
GB/T 36214.4-2018
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method
塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分:高温法 - 英文版

Find out:464Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9 10

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved