China Method of test for c GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 30666-2014 Textiles―Test method for identification of coated material 纺织品涂层鉴别试验方法 - 英文版
	GB/T 31093-2014 Test method for stress of monocrystalline sapphire ingot 蓝宝石晶锭应力测试方法 - 英文版
	GB/T 8117.3-2014 Rules for steam turbine thermal acceptance test―Part 3: Method C―Thermal performance verification tests of retrofitted steam turbines 汽轮机热力性能验收试验规程　第3部分：方法Ｃ改造汽轮机的热力性能验证试验 - 英文版
	GB/T 31294-2014 The core to wind turbine blade―Test method for facing cleavage of sandwich panels 风电叶片用芯材夹芯板面层剥离强度的测定 - 英文版
	GB/T 21143-2014 Metallic materials―Unified method of test for determination of quasistatic fracture toughness 金属材料准静态断裂韧度的统一试验方法 - 英文版
	GB/T 4372.6-2014 Methods for chemical analysis of zincoxide produced by direct process―Part 6：Testing of metallic zinc 直接法氧化锌化学分析方法第6部分：金属锌的检验 - 英文版
	GB/T 12967.4-2014 Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4：Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings 铝及铝合金阳极氧化膜检测方法第4部分：着色阳极氧化膜耐紫外光性能的测定 - 英文版
	GB/T 31248-2014 Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法 - 英文版
	GB/T 31264-2014 Test methods for mechanical properties of structural wood-based panels 结构用人造板力学性能试验方法 - 英文版
	GB/T 31226-2014 Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法 - 英文版
	GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer 椭圆偏振仪测量硅表面上二氧化硅薄层厚度的方法 - 英文版
	GB/T 21294-2014 Testing methods of physical and chemical performance of garments 服装理化性能的检验方法 - 英文版
	GB/T 31213.3-2014 Non-destructive testing—Testing of cast iron equipments and components—Part 3: Test method for acoustic emission 无损检测铸铁构件检测第3部分：声发射检测方法 - 英文版
	GB/T 31213.2-2014 Non-destructive testing―Testing of cast iron equipments and components―Part 2: Test method for acousto-ultrasonic 无损检测铸铁构件检测第2部分：声超声检测方法 - 英文版
	GB/T 31213.1-2014 Non-destructive testing—Testing of cast iron equipments and components―Part 1: Test method for ultrasonic 无损检测铸铁构件检测第1部分：超声检测方法 - 英文版
	GB/T 31198-2014 Test method of activity for deoxidizing protection type sulfur recovery catalyst 脱氧保护型硫磺回收催化剂活性试验方法 - 英文版
	GB/T 31196-2014 Test method of activity for sulfur exhaust hydrogenation catalyst 硫磺尾气加氢催化剂活性试验方法 - 英文版
	GB/T 31193-2014 Test method of activity for titanium oxide type sulfur recovery catalyst 二氧化钛型硫磺回收催化剂活性试验方法 - 英文版
	GB/T 31192-2014 Test method of arsenic content for copper series arsenic removal capacity at room temperature 常温铜系脱砷剂砷容试验方法 - 英文版
	GB/T 31191-2014 Test method of manganese deoxidizer deoxy performance at room temperature 常温锰系脱氧剂脱氧性能试验方法 - 英文版
	GB/Z 5169.34-2014 Fire hazard testing for electric and eletronic products—Part 34: Guidance for assessing the fire hazard—Ignitability—Summary and relevance of test methods 电工电子产品着火危险试验第34部分：着火危险评定导则起燃性试验方法概要和相关性 - 英文版
	GB/T 5169.38-2014 Fire hazard testing for electric and electronic products―Part 38: Toxicity of fire effluent―Summary and relevance of test methods 电工电子产品着火危险试验第38部分：燃烧流的毒性试验方法概要和相关性 - 英文版
	GB/T 31128-2014 Test methods for the resistance to pile loop extraction of towel product 毛巾产品毛圈钩拉力测试方法 - 英文版
	GB/T 13465.1-2014 Test method of impermeable graphite materials―Part 1: General 0f test method for mechanical properties 不透性石墨材料试验方法第1部分：力学性能试验方法总则 - 英文版
	GB/T 30860-2014 Test methods for surface roughness and saw mark of silicon wafers for solar cells 太阳能电池用硅片表面粗糙度及切割线痕测试方法 - 英文版
	GB/T 30859-2014 Test method for warp and waviness of silicon wafers for solar cells 太阳能电池用硅片翘曲度和波纹度测试方法 - 英文版
	GB/T 30983-2014 Test method for optical properties of photovoltaic glass 光伏用玻璃光学性能测试方法 - 英文版
	GB/T 13203-2014 Test methods for verifying capabilities of motorcycle tyres 摩托车轮胎性能试验方法 - 英文版
	GB/T 30869-2014 Test method for thickness and total thickness variation of silicon wafers for solar cell 太阳能电池用硅片厚度及总厚度变化测试方法 - 英文版
	GB/T 30868-2014 Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching 碳化硅单晶片微管密度的测定化学腐蚀法 - 英文版
	GB/T 30867-2014 Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers 碳化硅单晶片厚度和总厚度变化测试方法 - 英文版
	GB/T 30866-2014 Test method for measuring diameter of monocrystalline silicon carbide wafers 碳化硅单晶片直径测试方法 - 英文版
	GB/T 11017.1-2014 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件第1部分：试验方法和要求 - 英文版
	GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials 定向纤维增强聚合物基复合材料弯曲性能试验方法 - 英文版
	GB/T 3355-2014 Test method for in-plane shear response of polymer matrix composite materials 聚合物基复合材料纵横剪切试验方法 - 英文版
	GB/T 3354-2014 Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials 定向纤维增强聚合物基复合材料拉伸性能试验方法 - 英文版
	GB/T 30970-2014 Test method for the shear properties of polymer matrix composite materials by V-notched beam method 聚合物基复合材料剪切性能V型缺口梁试验方法 - 英文版
	GB/T 30969-2014 Test method for short-beam shear strength of polymer matrix composite materials 聚合物基复合材料短梁剪切强度试验方法 - 英文版
	GB/T 30968.4-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength 聚合物基复合材料层合板开孔/受载孔性能试验方法第4部分：开孔压缩强度试验方法 - 英文版
	GB/T 30968.3-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength 聚合物基复合材料层合板开孔/受载孔性能试验方法第3部分：开孔拉伸强度试验方法 - 英文版
	GB/T 30968.2-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression 聚合物基复合材料层合板开孔/受载孔性能试验方法第2部分：充填孔拉伸和压缩试验方法 - 英文版
	GB/T 30968.1-2014 Test method for open-hole/loaded-hole of polymer matrix composite laminates—Part 1: Test method of bearing response 聚合物基复合材料层合板开孔/受载孔性能试验方法第1部分：挤压性能试验方法 - 英文版
	GB/T 7791-2014 Test method for performance of reducing frictional resistance of antifouling coatings 防污漆降阻性能试验方法 - 英文版
	GB/T 7125-2014 Test method for thickness of adhesive tapes 胶粘带厚度的试验方法 - 英文版
	GB/T 30921.1-2014 Test method of purified terephthalic acid (PTA) for industrial use―Part 1：Determination of concentrations of 4-carboxybenzaldehyde (4-CBA) and p-toluic acid (p-TOL) 工业用精对苯二甲酸（PTA）试验方法第1部分：对羧基苯甲醛（4-CBA）和对甲基苯甲酸(p-TOL)含量的测定 - 英文版
	GB/T 30913-2014 Standard test method for classification of film systems for industrial radiography 工业射线胶片系统分类标准试验方法 - 英文版
	GB/T 30907-2014 Rubbershoes―Test method for shock attenuating properties of athletic shoes 胶鞋运动鞋减震性能试验方法 - 英文版
	GB/T 30792-2014 Test method for resistance of water-borne coatings in the container to attack by microorganisms 罐内水性涂料抗微生物侵染的试验方法 - 英文版
	GB/T 30790.6-2014 Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods 色漆和清漆防护涂料体系对钢结构的防腐蚀保护第6部分：实验室性能测试方法 - 英文版
	GB/T 30798-2014 The test method for safety of food detergents―Limit test for fluorescent whitening agent 食品用洗涤剂试验方法荧光增白剂的测定 - 英文版

Find out:2292Items | To Page of: First -Previous-Next -Last | [15] [16] [17] [18] [19] [20] [21]