China Determination of tur GB Standards Search Result |
![]() |
1. Ready translated GB standards ![]() 2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
![]() |
GB/T 9966.4-2020 Test methods for natural stone--Part 4: Determination of abrasion resistance - 英文版 |
![]() |
|
![]() |
GB/T 9966.3-2020 Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity - 英文版 |
![]() |
|
![]() |
GB/T 9966.2-2020 Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural strength - 英文版 |
![]() |
|
![]() |
GB/T 9966.1-2020 Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength - 英文版 |
![]() |
|
![]() |
GB/T 38506-2020 Determination of biochemical parameters in animal cell culture process - 英文版 |
![]() |
|
![]() |
GB/T 39719-2020 Field and concentrated natural rubber latices—Determination of magnesium content—Cyanide-free titrimetric method - 英文版 |
![]() |
|
![]() |
GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2:Preparation of test specimens and determination of properties - 英文版 |
![]() |
|
![]() |
GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method - 英文版 |
![]() |
|
![]() |
GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) - 英文版 |
![]() |
|
![]() |
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) - 英文版 |
![]() |
|
![]() |
GB/T 39544-2020 Natural rubber latex concentrate—Determination of total phosphate content—Spectrophotometric method - 英文版 |
![]() |
|
![]() |
GB/Z 6113.403-2020 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products - 英文版 |
![]() |
|
![]() |
GB/T 39422-2020 Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure - 英文版 |
![]() |
|
![]() |
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach - 英文版 |
![]() |
|
![]() |
GB/T 5832.4-2020 Gas analysis—Determination of moisture—Part 4: The method of quartz crystal oscillation - 英文版 |
![]() |
|
![]() |
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling - 英文版 |
![]() |
|
![]() |
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling - 英文版 |
![]() |
|
![]() |
GB/T 38016-2019 Textiles—Determination of moisture drying rate - 英文版 |
![]() |
|
![]() |
GB/T 37829-2019 Iron ore fines in bulk—Determination of transportable moisture limits—Flow-table method - 英文版 |
![]() |
|
![]() |
GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR) - 英文版 |
![]() |
|
![]() |
GB/T 13477.13-2019 Test method for building sealants-Part 13:Determination of adhesion/cohesion properties at variable temperatures - 英文版 |
![]() |
|
![]() |
GB/T 8293-2019 Rubber latex, natural concentrate—Determination of sludge content - 英文版 |
![]() |
|
![]() |
GB/T 8086-2019 Rubber, raw natural—Determination of dirt content - 英文版 |
![]() |
|
![]() |
GB/T 1634.2-2019 Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite - 英文版 |
![]() |
|
![]() |
GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method - 英文版 |
![]() |
|
![]() |
GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature - 英文版 |
![]() |
|
![]() |
GB/T 16430-2018 Determination of the minimum ignition temperature of dust layer - 英文版 |
![]() |
|
![]() |
GB/T 34247.2-2018 Determination of the unsaturation of isobutene-isoprene rubber—Part 2:1H-NMR method - 英文版 |
![]() |
|
![]() |
GB/T 13477.12-2018 Test method for building sealants-Part 12:Determination of adhesion/cohesion properties at constant temperature - 英文版 |
![]() |
|
![]() |
GB/T 36214.4-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method - 英文版 |
![]() |
Find out:489Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 |