Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Measurement of the a GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
     
GB/T 25964-2010
Petroleum and liquid petroleum products - Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
石油和液体石油产品 采用混合式油罐测量系统测量立式圆筒形油罐内油品体积、密度和质量的方法 - 英文版
GB/T 25758.5-2010
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
无损检测 工业X射线系统焦点特性 第5部分:小焦点和微焦点X射线管的有效焦点尺寸的测量方法 - 英文版
GB/T 25753.2-2010
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput
真空技术 罗茨真空泵性能测量方法 第2部分:零流量压缩比的测量 - 英文版
GB/T 25749.4-2010
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
机械安全 空气传播的有害物质排放的评估 第4部分:测量排气系统捕获效率的示踪法 - 英文版
GB/T 25749.3-2010
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
机械安全 空气传播的有害物质排放的评估 第3部分:测量给定污染物排放率的试验台法 - 英文版
GB/T 25749.2-2010
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
机械安全 空气传播的有害物质排放的评估 第2部分:测量给定污染物排放率的示踪气体法 - 英文版
GB/T 18655-2010
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 - 英文版
GB/T 20441.3-2010
Electroacoustics - Measurement microphone - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
电声学 测量传声器 第3部分:采用互易技术对实验室标准传声器的自由场校准的原级方法 - 英文版
GB/T 25256-2010
Optical functional films - Release film - The measurement of peeling force at 180°angle and subsequent adhesion
光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法 - 英文版
GB/T 25134-2010
Optical measurement specification of 3D geometry for forgings/stampings and the dies
锻压制件及其模具三维几何量光学检测规范 - 英文版
GB/T 13930-2010
Methods for the measurement of volume flow of gas of water-ring vacuum pumps and compressors
水环真空泵和水环压缩机 气量测定方法 - 英文版
GB/T 19889.14-2010
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field
声学 建筑和建筑构件隔声测量 第14部分:特殊现场测量导则 - 英文版
GB/Z 22553-2010
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
利用重复性、再现性和正确度的估计值评估测量不确定度的指南 - 英文版
GB/T 24959-2010
Refrigerated light hydrocarbon fluids - Measurement of temperature in tanks containing liquefied gases - Resistance thermometers and thermocouples
冷冻轻烃流体 液化气储罐内温度的测量 电阻温度计和热电偶 - 英文版
GB/T 24794-2009
Photographic chemicals - Measurement methods of the trace elements in the organic compounds - Inductively coupled plasma atomic emission spectrometry (ICP-AES)
照相化学品 有机物中微量元素的分析 电感耦合等离子体原子发射光谱(ICP-AES)法 - 英文版
GB/T 24635.3-2009
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第3部分:应用已校准工件或标准件 - 英文版
GB/T 24622-2009
Guidance on the measurement of wettability of insulator surfaces
绝缘子表面湿润性测量导则 - 英文版
GB 20936.2-2009
Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
可燃性气体探测用电气设备 第2部分:显示空气中甲烷体积含量至5%的I类探测器的性能要求 - 英文版
GB/T 13888-2009
Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
在开磁路中测量磁性材料矫顽力的方法 - 英文版
GB/T 24185-2009
Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method
逐级加力法测定钢中氢脆临界值试验方法 - 英文版
GB/T 23770-2009
Liquid inorganic chemical products - General method for the measurement of colour
液体无机化工产品色度测定通用方法 - 英文版
GB/T 14124-2009
Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings
机械振动与冲击 建筑物的振动 振动测量及其对建筑物影响的评价指南 - 英文版
GB/T 20936.3-2009
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
可燃性气体探测用电气设备 第3部分:显示空气中甲烷体积含量至100%的I类探测器的性能要求 - 英文版
GB/T 23459-2009
Measurement and calculation method of heat balance and thermal efficiency for ceramic industrial kiln
陶瓷工业窑炉热平衡、热效率测定与计算方法 - 英文版
GB 16486-2008
The limits and measurement methods of fuel consumption for mopeds
轻便摩托车燃油消耗量限值及测量方法 - 英文版
GB 15744-2008
The limits and measurement methods of fuel consumption for motorcycles
摩托车燃油消耗量限值及测量方法 - 英文版
GB 20936.4-2008
Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
可燃性气体探测用电气设备 第4部分:显示气体体积含量至100%的II类探测器的性能要求 - 英文版
GB/T 22665.6-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 6: Hammers
手持式电动工具手柄的振动测量方法 第6部分:锤类工具 - 英文版
GB/T 22665.5-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 5: Circular saws
手持式电动工具手柄的振动测量方法 第5部分:圆锯 - 英文版
GB/T 22665.4-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 4: Sanders and polishers other than disk type
手持式电动工具手柄的振动测量方法 第4部分:非盘式砂光机和抛光机 - 英文版
GB/T 22665.3-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 3: Grinders, polishers and disk-type sanders
手持式电动工具手柄的振动测量方法 第3部分:砂轮机、抛光机和盘式砂光机 - 英文版
GB/T 22665.2-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 2: Screwdrivers and impact wrenches
手持式电动工具手柄的振动测量方法 第2部分:螺丝刀和冲击扳手 - 英文版
GB/T 22665.1-2008
Measurement of vibrations at the handle of hand-held electric tools - Part 1: Drills and impact drills
手持式电动工具手柄的振动测量方法 第1部分:电钻和冲击钻 - 英文版
GB/T 14625.2-2008
Test methods for basketball, football, volleyball and handball - Part 2: The measurement of bouncing altitude
篮球、足球、排球、手球试验方法 第2部分:反弹高度测定方法 - 英文版
GB/T 14625.1-2008
Test methods for basketball, football, volleyball and handball - Part 1: The measurement of roundness
篮球、足球、排球、手球试验方法 第1部分:圆度测定方法 - 英文版
GB/T 10283-2008
Forestry machinery - Portable pneumatic fire extinguisher - Measurement of vibration at the handles
林业机械 便携式风力灭火机 手把振动的测定 - 英文版
GB/T 3655-2008
Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an epstein frame
用爱泼斯坦方圈测量电工钢片(带)磁性能的方法 - 英文版
GB/T 13789-2008
Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
用单片测试仪测量电工钢片(带)磁性能的方法 - 英文版
GB 4793.6-2008
Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials
测量、控制和实验室用电气设备的安全要求 第6部分:实验室用材料加热设备的特殊要求 - 英文版
GB/T 6375-2008
Earth-moving machinery - Method of test for the measurement of drawbar pull
土方机械 牵引力测试方法 - 英文版
GB/T 22279-2008
Guide for development of certified reference materials for the composition analysis and the physical property measurements of coal
煤炭成分分析和物理特性测量标准物质研制导则 - 英文版
GB/T 22184-2008
Cereals and pulses - Guidance on measurement of the temperature of grain stored in bulk
谷物和豆类 散存粮食温度测定指南 - 英文版
GB/T 8910.5-2008
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work
手持便携式动力工具 手柄振动测量方法 第5部分: 建筑工程用路面破碎机和镐 - 英文版
GB/T 8910.4-2008
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders
手持便携式动力工具 手柄振动测量方法 第4部分: 砂轮机 - 英文版
GB/T 22159.3-2008
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分:弹性支撑件平动动刚度的间接测量方法 - 英文版
GB/T 2951.41-2008
Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl
电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分 - 英文版
GB/T 2951.13-2008
Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test
电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验 - 英文版
GB/T 2951.11-2008
Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验 - 英文版
GB 10069.3-2008
Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 3:Noise limits
旋转电机噪声测定方法及限值 第3部分: 噪声限值 - 英文版
GB/T 17357-2008
In-situ measurements of heat loss through thermal insulation of equipments and pipes - Heat flow meter apparatus and surface temperature method
设备及管道绝热层表面热损失现场测定 热流计法和表面温度法 - 英文版

Find out:324Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved